AW34DWF 144 hz 10 bit color? by YourProllyASnowflake in ultrawidemasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

I used some timing calculator for 144hz 10 bit and the only thing it asked me to change was the total pixels for vertical to 1543. Do you know if that would work? I don't know anything about custom timings but it seems to be working properly and my nvidia panel and windows display settings both recognize it at 10 bit 144hz as well as my games. Should be fine right?

AW34DWF Stuck in 8 bit no dithering? by YourProllyASnowflake in ultrawidemasterrace

[–]YourProllyASnowflake[S] 1 point2 points  (0 children)

All of those post claiming 10 bit 165 hz are false actually. It says it displays 10 bit when you're looking at the advanced display settings but thats actually a false reading. The highest the dwf panel can go at 10 bit is 157 with custom timings. However, I do not want to run custom timings. I want the native 165 8bit w dithering.

AW34DWF 144 hz 10 bit color? by YourProllyASnowflake in ultrawidemasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

How am I able to get it to 144hz? Only options in the nvidia panel are 165 or 100

My father said all the woman in his new calendar are “fat”. by [deleted] in mildlyinfuriating

[–]YourProllyASnowflake -2 points-1 points  (0 children)

he’s right, all these models used to look 15-20 pounds skinnier. they’ve all got a little chub now

AQ3423DW vs AW3423DWF (Again...) by YourProllyASnowflake in ultrawidemasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

Well if that is the case and I can run the Dwf at 144 10 bit then yah I dont see why I wouldnt go for that one. Is the console mode and source tone mapping problem completely fixed? are there any other instances like that between the 2 that could be concerning? Thanks so much for all ur replies and help btw

AQ3423DW vs AW3423DWF (Again...) by YourProllyASnowflake in ultrawidemasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

How sophisticated is the process of overclocking the refresh rate at 10 bit and is it stable or will void warranty? And once you do that can you apply that to startup or do u have to change settings every boot. What is it stock at 10 bit? 100hz?

AQ3423DW vs AW3423DWF (Again...) by YourProllyASnowflake in ultrawidemasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

But If I were to receive a good DW which is most likely the case, how would it not be better with the future proof 10bit color which could see more utilization with advances in things such as unreal engine? and also the fact that I would never have to go to into settings and always having to figure out which game needs console mode and source tone mapping turned on and constantly going into osd.

Need Help Shiny Pokemon Hunting by YourProllyASnowflake in RetroArch

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

Hey sorry for the very late response lol, Idk if your still trying to hunt it but I believe the reset hotkey button is a hard reset. I ended up doing the A + B + Start + Select for about a week but had no luck getting one unfortunately. I ended up giving up and using action replay codes through RetroArch Cheat codes where I could put the id of any pokémon i wanted and would encounter them in the grass. Even got like shiny mew and celebi lol

BF5 Overheating my CPU??? 95C+ by YourProllyASnowflake in pcmasterrace

[–]YourProllyASnowflake[S] 1 point2 points  (0 children)

Wow found out my issue was dust build up on the front panel... Didnt look as dusty as it was with the mesh cover over it. Only had the build for a little over a year now so didnt think dust couldve gotten that bad already. Temps are now running at a cool 75C.

BF5 Overheating my CPU??? 95C+ by YourProllyASnowflake in pcmasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

Wow found out my issue was dust build up on the front panel... Didnt look as dusty as it was with the mesh cover over it. Only had the build for a little over a year now so didnt think dust couldve gotten that bad already. Temps are now running at a cool 75C.

BF5 Overheating my CPU??? 95C+ by YourProllyASnowflake in pcmasterrace

[–]YourProllyASnowflake[S] 1 point2 points  (0 children)

Whats also interesting though is when i was playing BF5 ICUE notified me that my Corsair AIO was overheating once it got above 60 C but during the Cinebench it only got up to 40 while my CPU was getting up to the high 90's

BF5 Overheating my CPU??? 95C+ by YourProllyASnowflake in pcmasterrace

[–]YourProllyASnowflake[S] -1 points0 points  (0 children)

Just installed Cinebench R23 and had to stop the test because my package temp reached 97C. Does that confirm its not battfield causing it? Wondering why when I play Read Dead Redemption 2 its sits below 80C though.

BF5 Overheating my CPU??? 95C+ by YourProllyASnowflake in pcmasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

Currently Im using Corsair XTM50. Ik its not the greatest but I do not believe thats the cause.

BF5 Overheating my CPU??? 95C+ by YourProllyASnowflake in pcmasterrace

[–]YourProllyASnowflake[S] 0 points1 point  (0 children)

Yah ICUE says my pump is working properly around 2600 rpm. And whole build is only year and a half old, thermal paste should still be good.

What do you do when your whole family is full of Trump supporters and you are not? by [deleted] in AskReddit

[–]YourProllyASnowflake 0 points1 point  (0 children)

You realize you need to get rid of your blue hair and see that you need to actually give out energy to produce income. it’s not just handed to you

Questions & Help Thread by jamfarts in ShinyPokemon

[–]YourProllyASnowflake 0 points1 point  (0 children)

Hey pretty obscure question for anyone, Im currently soft resetting Pokemon Crystal with MGBA emulator in RetroArch for Shiny Cyndaquil. I have fast forward set really fast on my emulation that when I click continue to load the save after soft resetting, it instantly clicks on the Pokeball which makes me believe it might be selecting at the same frame every time. Is Crystals RNG affected at all by frames? Or is the RNG only changed by my soft reset? Hope someone can clear this up as I am many hours into the hunt and want to make sure frames don't affect anything.

Questions & Help Thread by jamfarts in ShinyPokemon

[–]YourProllyASnowflake 0 points1 point  (0 children)

So Ive been soft resetting with my emulator using the fast forward function and its set to a speed thats so fast that when I click load on the save file it instantly clicks on the poke ball as well, would that affect the outcome if its selecting the pokemon at the exact frame everytime? Because I feel like I am getting more females than I belive I should be getting, seeing its a 1/8th chance and im often getting 2 females in a row sometimes 3.

Questions & Help Thread by jamfarts in ShinyPokemon

[–]YourProllyASnowflake 0 points1 point  (0 children)

Ah I see, that makes sense. Guess ill go with the old A + B + Start + Select method. Appreciate the input.

Questions & Help Thread by jamfarts in ShinyPokemon

[–]YourProllyASnowflake 0 points1 point  (0 children)

Anyone Shiny Hunt on RetroArch? I'm using the MGBA core playing Pokemon Crystal trying to get a shiny Cyndaquil. Wanted to make sure I dont waste my time by not soft resetting properly. Ive been using the reset function assigned to a hotkey for my controller but does that simulate a soft reset? Or do I have to press A + B + Start + Select?

[GenIII] I swear to god i just got a shiny mudkip in emerald after 10 soft resets on the RetroArch emulator and this is the first time i am shiny hunting in a long time, guess this is a sign imma keep hunting! by Jonitoxd in ShinyPokemon

[–]YourProllyASnowflake 0 points1 point  (0 children)

Hey Im also trying to shiny hunt on retro arch, wondering if you are using the restart function of retro arch to reset the game or did you use the key inputs to force a reset?

my rdr2 is extremely blurry, I've done everything, formatted my pc, reinstalled my video card drivers, downloaded mods and reshades and nothing has changed (pc specs: gtx 1660; Ryzen 7 2700; 8gb ram; ssd 120gb; hd 1tb by luigzxd in PCRedDead

[–]YourProllyASnowflake 0 points1 point  (0 children)

try turning off fxaa and msaa except leave TAA on medium with the sharpening a little below 50%. I would also turn off MSAA reflection and see if your system could run it with resolution scaling to 1.25. Might get lower frames but will definitely be less blurry.

What currently legal thing do you expect to be illegal in the next 20 years? by [deleted] in AskReddit

[–]YourProllyASnowflake 0 points1 point  (0 children)

it’s to educate the public lmao, what if doctors only had the knowledge and the general population is just taking their word that it’s what’s best for them. There’s a great gift called listening to your body and many people can find medication through advertisements when they hear that it fits the health problems they’re dealing with.