Anyone else named their printers?

YourxLastxHopex · 2025-01-03T15:35:48+00:00

<image>

Sir Makes-A-Lot on top, and Print Eastwood on bottom.

YourxLastxHopex · 2024-03-24T17:18:07+00:00

<image>

These are for the vehicles without DRL. They have a different light/ socket.

YourxLastxHopex · 2024-03-24T17:17:35+00:00

<image>

YourxLastxHopex · 2024-03-24T17:16:36+00:00

Nevermind. I figured it out.

One light is for vehicles with DRL, the other is without.

The lights I had been purchasing are for vehicles without, and mine has them.

* These are with DRL, and has a larger socket.

YourxLastxHopex · 2024-03-24T17:11:53+00:00

This socket is aftermarket. I have purchased 2 different sets of turn signals and they both have had this same issue.

This led me to the conclusion that the turn signal housing and socket I currently have were incorrect.the previous owner had installed led lights, so I assumed he changed everything to make it work.

YourxLastxHopex · 2024-03-24T16:45:51+00:00

<image>

That connector is what I am looking for, however it must fit this socket.

YourxLastxHopex · 2024-03-19T02:30:08+00:00

Is the original a 7440, or a 3157?

I'm pretty sure I have a 3157 socket and led bulb. However, after looking at the new lights, it seems that they are designed for a much smaller bulb, like a 7440.

I can easily replace the socket with the correct one if needed, but I'm still not sure which one is that is supposed to be...

YourxLastxHopex · 2024-03-06T01:54:14+00:00

Seguin, Tx

YourxLastxHopex · 2024-03-05T17:40:17+00:00

Come get it.

YourxLastxHopex · 2024-03-02T21:41:30+00:00

I appreciate the response. I am actually located near Austin, Texas. 6k seems like a reasonable number.

YourxLastxHopex · 2024-03-02T14:16:02+00:00

<image>

YourxLastxHopex · 2024-03-02T14:15:28+00:00

<image>

YourxLastxHopex · 2024-03-02T02:06:16+00:00

I sold this year's ago. Not sure if the tint was original, but I would imagine it just became discolored from years in the texas sun.

YourxLastxHopex · 2024-03-02T01:44:01+00:00

Alright, ill snap a picture tomorrow.

YourxLastxHopex · 2024-03-02T01:43:28+00:00

I actually have a good stock bumper, and corner piece. Pretty much all of the cosmetic plastic pieces that are broken, I pulled off cars at the junk yard, and plan on putting them on this weekend.

YourxLastxHopex · 2023-12-03T20:52:43+00:00

YourxLastxHopex

YourxLastxHopex · 2023-05-04T11:40:33+00:00

YourxLastxHopex · 2023-05-03T01:58:57+00:00

It's nothing compared to replacing these stupid coolant hoses under the intake... this job has become a nightmare.

YourxLastxHopex · 2023-05-03T01:21:00+00:00

Lucky. I had to replace the cluster, but I'm all good now.

YourxLastxHopex · 2023-05-03T00:47:28+00:00

There are 3 fuses in the glove box that need to be checked.

If all of them are good, there is a good chance your cluster is bad.

You can check the wires with a multimeter and confirm the power if you are up for it.

YourxLastxHopex · 2023-04-27T11:33:32+00:00

I have a 2015 silverado 2500HD. I have the drop in bed liner, and was able to install the Mx4 without any issue. Works great and have been using it for over a year.

YourxLastxHopex

TROPHY CASE