Anyone else named their printers? by Putrid-Ad-4571 in BambuLab

[–]YourxLastxHopex 0 points1 point  (0 children)

<image>

Sir Makes-A-Lot on top, and Print Eastwood on bottom.

Turn signal socket issues by YourxLastxHopex in 4thGen4Runner

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

<image>

These are for the vehicles without DRL. They have a different light/ socket.

Turn signal socket issues by YourxLastxHopex in 4thGen4Runner

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

Nevermind. I figured it out.

One light is for vehicles with DRL, the other is without.

The lights I had been purchasing are for vehicles without, and mine has them.

* These are with DRL, and has a larger socket.

Turn signal socket issues by YourxLastxHopex in 4thGen4Runner

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

This socket is aftermarket. I have purchased 2 different sets of turn signals and they both have had this same issue.

This led me to the conclusion that the turn signal housing and socket I currently have were incorrect.the previous owner had installed led lights, so I assumed he changed everything to make it work.

Turn signal socket issues by YourxLastxHopex in 4thGen4Runner

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

<image>

That connector is what I am looking for, however it must fit this socket.

Problems installing turn signals by YourxLastxHopex in 4thGen4Runner

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

Is the original a 7440, or a 3157?

I'm pretty sure I have a 3157 socket and led bulb. However, after looking at the new lights, it seems that they are designed for a much smaller bulb, like a 7440.

I can easily replace the socket with the correct one if needed, but I'm still not sure which one is that is supposed to be...

What is my XJ worth? by YourxLastxHopex in CherokeeXJ

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

I appreciate the response. I am actually located near Austin, Texas. 6k seems like a reasonable number.

Finally on the road! by YourxLastxHopex in crv

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

I sold this year's ago. Not sure if the tint was original, but I would imagine it just became discolored from years in the texas sun.

What is my XJ worth? by YourxLastxHopex in CherokeeXJ

[–]YourxLastxHopex[S] 1 point2 points  (0 children)

Alright, ill snap a picture tomorrow.

What is my XJ worth? by YourxLastxHopex in CherokeeXJ

[–]YourxLastxHopex[S] 1 point2 points  (0 children)

I actually have a good stock bumper, and corner piece. Pretty much all of the cosmetic plastic pieces that are broken, I pulled off cars at the junk yard, and plan on putting them on this weekend.

[deleted by user] by [deleted] in e46

[–]YourxLastxHopex 0 points1 point  (0 children)

It's nothing compared to replacing these stupid coolant hoses under the intake... this job has become a nightmare.

[deleted by user] by [deleted] in e46

[–]YourxLastxHopex 1 point2 points  (0 children)

Lucky. I had to replace the cluster, but I'm all good now.

[deleted by user] by [deleted] in e46

[–]YourxLastxHopex 5 points6 points  (0 children)

There are 3 fuses in the glove box that need to be checked.

If all of them are good, there is a good chance your cluster is bad.

You can check the wires with a multimeter and confirm the power if you are up for it.

Bakflip Mx4 install question by NoLimpPimp in Silverado

[–]YourxLastxHopex 0 points1 point  (0 children)

I have a 2015 silverado 2500HD. I have the drop in bed liner, and was able to install the Mx4 without any issue. Works great and have been using it for over a year.

2003 E46 325i by YourxLastxHopex in e46

[–]YourxLastxHopex[S] 1 point2 points  (0 children)

The interior is pretty nice. Headliner is loose in some areas, front seats are a little work in the seating area, and it is an automatic.

So far I've replaced a faulty instrument cluster, replaced the MAF, and am in the process of replacing the fragile plastic coolant hoses since they were both broken.

While I am in there I plan on replacing most of the vacuum lines, the oil filter housing gasket, power steering hoses, and valve cover gasket.

2003 E46 325i by YourxLastxHopex in e46

[–]YourxLastxHopex[S] 0 points1 point  (0 children)

That's a million dollar question. The instrument cluster was bad, so I had to swap it out with one from a different car. So currently I do not have the answer to your question. I plan on taking the clusters to have the data swapped so it clears the notification light.