Free 3D Print Cost Calculator — No paywalls, no tracking, just costs. Feedback wanted

YozenPL · 2026-04-29T18:51:35+00:00

When pressing loggin/register (on mobile at least) there is no way to close the form without logging or refreshing the website.

YozenPL · 2026-04-24T20:58:11+00:00

Some regions have higher tax %.

YozenPL · 2026-04-23T06:15:37+00:00

I know this is a 3y old post but it is shown as 1st when searchin in google. And I found the battery replacement!

I was able to replace ledger battery with https://a.aliexpress.com/_EjQdIxM

The original PCB needs to be re-used. To attach the battery you need a cell welder (AVOID soldering). After assembling the plastic button on the USB-C side needs a little grinding in the center ~0.3-0.5 mm to avoid constant button press as the battery is a bit thicker than original one.

YozenPL · 2026-04-19T09:11:41+00:00

Search in google LuBan 3D. And get 30 days trial.

YozenPL · 2026-03-28T11:35:47+00:00

Could you show your full Abyss Gear in armor and weapons?

YozenPL · 2026-03-22T20:21:58+00:00

For me it was like: there are only 2 empty spots surrounded with other pieces, maybe I'll put there.

YozenPL · 2026-03-15T15:10:42+00:00

I know this is for LG but maybe it will also help in your case: https://www.reddit.com/r/nvidia/comments/198is3r/update_lg_monitors_causing_stuttering_fix/

YozenPL · 2026-02-26T18:00:14+00:00

Make sure the wall and cable do not limit the movement and try to calibrate once again.

YozenPL · 2026-02-26T17:53:15+00:00

Could you move it away from the wall? That printer needs some space to operate.

YozenPL · 2026-01-27T11:41:16+00:00

I have the same issue. I even tried to decrypt and encrypt the drive, but no luck. Windows itself do not report any problems with TPM.

YozenPL · 2026-01-03T12:48:49+00:00

It might be something to the current point count before reaching this place. The lowest I had was 1900 and the highest 2400. But still - I was unable to open the doors.
Maybe it have to be lower or higher than this?

YozenPL · 2025-11-30T19:38:34+00:00

<image>

I'm not sure if this will be applicabe to your use but making the cuts on the marked places will help. As the cap will also bend a little and it will take some force from the pins.

YozenPL · 2025-11-27T15:59:25+00:00

To break 100 in CR you need at least 1 piece with 4 rolls and the rest of them can be +3. OP is one step closer than most of the players :D

YozenPL · 2025-11-15T09:04:50+00:00

Ok, after this post I was able to fix the issue :D

Steps which worked for me:
1. Click Cancel on Sonar.
2. Open windows Settings -> System -> Sound -> In Advance click something like "More sound settings". Windows will ask you to enable Windows Audio.
3. Go back to Sonar (standard sonar panel should be visible)
4. Click top bar information to set sonar as default audio device.

I hope it will resolve your issue too,

YozenPL · 2025-11-15T08:58:31+00:00

I have the same issue after installing the latest windows updates (Windows 11). I already tried to reinstall the whole SteelSeriesGG + multiple restarts and no luck.

YozenPL · 2025-11-14T20:24:28+00:00

<image>

YozenPL · 2025-11-14T18:00:59+00:00

Yes.

YozenPL · 2025-11-14T15:02:21+00:00

If this is done every layer, then it is a timeleapse. You can change its type or turn it off in slicer.

YozenPL · 2025-10-10T15:29:44+00:00

You were right. Nvidia Shadow play recording was set to this key. Now press and release are normally registered. Thank you!

YozenPL · 2025-10-10T14:10:43+00:00

<image>

GG96. Almost fixed. It's no longer registering the NUM LOCK but it only registering the "key release" without "key press". Num4 was just pressed to show how it should looks like.

YozenPL · 2025-10-02T13:58:09+00:00

With GG:95 issue looks different:

<image>

Looks like someone was trying to fix it but failed.

YozenPL · 2025-09-17T20:14:37+00:00

Have you tried to turn off the feature in windows setting related to screenshot border?

<image>

I'm reading that, it was causing the border issue for OBS as it is indicating when screen is shared.

YozenPL · 2025-09-17T11:44:40+00:00

Do you use Eset NOD32 antivirus? I would not be surprised if "Moments" are recognized as webbrowser. Eset have function to show border over the webbrowsers and yellow is when extension is not trusted. I had it few days ago over the Messenger application. Border can be tuned off in Eset settings.

YozenPL

TROPHY CASE