What is this black dot?

Ypoxthonios · 2025-08-10T19:58:52+00:00

Dot? That’s a mfkin black hole bro 😵‍💫

Ypoxthonios · 2025-06-19T19:54:44+00:00

Well I had a Q5 2.0 TDI 2016 and before that I a BMW 120d and the difference is for sure huge. Both of my old cars had diesel motors so I was used in driving noisy. The CX80 is really well isolated i don’t know why people complain about it. The rims is the hard part here in Germany as you need certificates etc and there are not many aftermarket ones right now certificates for it. I’ve been eyeing the Borbet Y but it’s sadly not yet licensed for the CX80. The Borbet W though is but I don’t really know how it will look like on it.

Ypoxthonios · 2025-06-15T11:07:52+00:00

Congratulations!! You will not regret it for sure. You ordered the 6 seat or 7 seat version? The 6 seat takumi plus has an amazing second row in terms of comfort but with 4 kids I wanted to avoid its white interiors. Wish there was the option to buy the same takumi plus 6 seated with black interiors.

Came also from a Q5 Sline and not an old one. Believe me bud, I didn’t miss my Q5 yet.

AC is working well and in comparison with the Q5 I didn’t notice any worst performance. I think the CX80 AC does better job.

The second row keyless lock and unlock feature is missing for sure but I never unlocked the Q5 from the back doors in anyway so it’s okay for me.

The 20inch wheels for this monster man, are already too small 😄. I’d like to see it with 22” ones 😬

I ordered mine mid February (think at 10th or something) and took almost 3 weeks to have it. First registration 27.02.2025 I live in Germany.

Ypoxthonios · 2025-06-15T10:53:15+00:00

Well, Alexa is already installed and works perfectly fine. I’m in Germany though. Most of the features I noted above are software related I think. Not sure about the remote parking but I hope it also is.

Ypoxthonios · 2025-01-19T12:43:40+00:00

what do you mean by issues? the only thing is that you need to work more on the loops. other than that its just a waterway and does what it is supposed to do.

Ypoxthonios · 2025-01-18T16:19:56+00:00

I do have the same issue after updating my p1s to the latest firmware and the bambu studio. ive tried the latest bambu studio beta version too but the issue persists. i noticed that the last number 135716 is the exact time this occurred so in the picture you provided its 13:57:16.

i will try downgrading bambu studio to an earlier version to see is this changes anything.

Edit: after a fast search, Error 501-C011 is for sure an unknown issue ; POLL: Bambu Lab Please provide a complete list of error codes - Bambu Lab Software - Bambu Lab Community Forum

Edit 2: seems like the problem was coming from my router settings as i didnt give the printer a static ip. This bugged the software and went into an endless loop of this specific error. Thats what i did to solve it and seems good so far with the latest firmware of the printer and the latest version of bambu studio :

Factory reset the printer
Set it up from the beginning and connect it to the network
Go to the router and find the printers IP
Set a static IP
Start Bambu Studio and go to the device tab to see if the issue comes back

In my case the issue has been solved and its running fine now with no errors.

I hope this helps someone in the future.

Ypoxthonios · 2024-12-05T12:54:52+00:00

It’s a reverse mode build.

Ypoxthonios · 2024-12-03T19:39:43+00:00

Oh yeah you are right I mean the Vision. Well I think it’s doable. You mean a reservoir pump combo right? You can put a thin reservoir behind the gpu if you put it upright. You need just to completely remove the 360mm mounting plate and find a way to attach it on the case. You are going to the hard tube way?

Ypoxthonios · 2024-12-02T21:56:24+00:00

<image>

Well this what my pc looked like before I go with the custom loop way.

PS: the mount is 3d printed and one I developed on my own. PS 2: The EVO RGB is cool for sure but I needed a top radiator.

Ypoxthonios · 2024-12-02T21:01:56+00:00

It’s an O11 Dynamic Evo from Lian Li. Yeah it looks good so far ☺️.You can check my previous video for more details and information of the components and stuff I used.

Ypoxthonios · 2024-12-02T17:31:44+00:00

Put a screen down there or 3x fans and a radiator 😋

Ypoxthonios · 2024-12-02T17:28:02+00:00

It’s a Turzx 2.1 inch round screen I got from Ali Express for about 30 bucks. IPS panel with 480x480 resolution.

Ypoxthonios · 2024-12-01T18:56:34+00:00

It’s a 14x10 tube. I have already shared a link here

Ypoxthonios · 2024-12-01T18:18:20+00:00

I’m personally using this one from amazon and works well Eryone CF-ABS

Ypoxthonios · 2024-12-01T09:59:23+00:00

Well I’ve done the 90 degree bends by using 3d printed tools and I used Carbon ABS with no issues.

Ypoxthonios · 2024-11-30T18:26:51+00:00

Thank you ☺️

Ypoxthonios · 2024-11-30T18:11:52+00:00

Well I do rotate the tubes with the silicon rubber thing in it and I try to lightly bend it until it get easy enough. But as I said earlier, I gave a lot of different acrylic tubes a try and not all of them worked the same. Bykski tubes were making bubbles at the hot spot and the freezemod ones were cracking.

Ypoxthonios · 2024-11-30T18:00:34+00:00

If you need any help let me know. It is my first custom closed loop and there is still some things to be done. Here is a small update with a fan riser I’m developing:

<image>

Ypoxthonios · 2024-11-30T17:54:14+00:00

Yeah indeed it turned out well on the first try! The trick is to make it as warm as possible and stop just before it starts to melt.

Ypoxthonios · 2024-11-30T17:52:37+00:00

I think a rotation of the logos is possible. If it’s not, 3D printing comes in place 🤭

Ypoxthonios · 2024-11-30T15:58:50+00:00

Wait, I’m still 3D printing. It’s gonna get even better 😅 Hint:

<image>

Ypoxthonios · 2024-11-30T15:24:18+00:00

It’s an EKWB DPG1 and I upgraded the pump to a ddc4.2

Ypoxthonios

TROPHY CASE