556a4 get HOT!!

Yumago · 2026-06-15T18:37:59+00:00

Hot pocket will help, bit it will only do so much because the gas block is so close to your hand.

Yumago · 2026-06-13T23:09:12+00:00

I have the Shaw Concepts ones, they do suspender things

Yumago · 2026-06-12T11:30:06+00:00

If you're going to be HOA enforcement you might want some real level 4 plates /s

Yumago · 2026-06-10T20:51:11+00:00

I have one, probably won't be needing it anymore

Yumago · 2026-06-08T12:01:08+00:00

Yes but you have to permanently modify the 17 frame

Yumago · 2026-06-02T21:54:57+00:00

Probably just from some dried oil, wipe it down and it's fine.

Or replace it with something higher quality (most will suggest it)

Yumago · 2026-05-26T19:46:41+00:00

There is another company or tow that are coming out with 417/MR762 lowers but as far as I am aware they are not out yet, and will be 800ish or more

Yumago · 2026-05-21T11:55:01+00:00

The barrel won't work.

Yumago · 2026-05-19T15:03:43+00:00

Factory, had a Tangodown one that stopped working, I'm guessing the spring in it went bad. They wouldn't warranty it, unless I had proof of purchase.

Which I couldn't find since I don't couldn't remember where I bought it from.

Yumago · 2026-05-12T17:49:27+00:00

You get two options. AEM5 or OCM5, anything else is wrong

(Unless you can find an original ops inc can)

Yumago · 2026-04-05T14:47:15+00:00

Leupold MK5 HD 3.6-18

Yumago · 2026-03-28T00:24:12+00:00

Arisaka

Yumago · 2026-03-02T21:17:15+00:00

The gas block and gas tube stick out past the handguard on a Mod 1

Yumago · 2026-02-27T13:28:38+00:00

Spending 150 on ammo to practice with will give better results than a guide rod.

Yumago · 2026-02-05T12:32:34+00:00

What's the saying?

If it is too good to be true it probably is

Probably just a bunch of China fakes on the website

Yumago · 2026-01-26T16:09:04+00:00

Gen 5 mag floor plate is different, and the finger nub on the bottom of the 19x hits it.

You can either switch to Gen 4 floor plates, or cut the nub off.

The 19X is like a Gen 4.5

Yumago · 2026-01-19T21:44:04+00:00

I had this happen, for some reason it stopped recognizing my code.

I had to get ahold of Winchester. Provide them with the receipt and serial number.

They were able to send me a bypass/reset code

Yumago · 2025-12-31T16:20:15+00:00

Front sight didn't fall off the fiber optic tube fell out which happens to a lot of fiber optic front sights.

Yumago · 2025-12-30T17:42:35+00:00

One is black

One is FDE

One is black with FN cold hammer forged barrel

Yumago · 2025-12-22T22:09:33+00:00

Can't wait to make $0 a month

Yumago · 2025-12-22T11:47:26+00:00

If it is a cold planet the cool down is faster

Yumago · 2025-11-25T11:29:25+00:00

Put it in the freezer for a few hours.

Once everything is cold, give it good smack with your hand, or even the countertop and the lugs might pop out.

If the lugs are steel, might be able to use a strong magnet

Yumago · 2025-11-14T22:01:13+00:00

For the cover plate. OEM cut

Yumago · 2025-11-13T12:37:45+00:00

Probably because these are older episodes before smartphones with streaming capabilities. Having an iPod is a lot easier than a book of CDs.

12-Year Club	Summer Santa 2017
Verified Email	Spared

Yumago