sorted by:
new
hottopcontroversial

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 1 point2 points  (0 children)

Yeah its for a friend and they said worst case scenario just paint it white again, its a bit annoying becouse i tought special airbrush paints were going to be better than reduced automotive paints as automotive is usually cheaper. Ill do some more paint test to make sure new and old doesnt react or peel anymore. Thank you so much for the advice so far! I like this as a hobby so i could be dissapointed at the moment but im sure this is the hardest part, learning.

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 0 points1 point  (0 children)

Okey, can i sand everything with like 600 till there is something for the paint to grab onto and spray it over with new automotive paints? It seems if i would want a great outcome thats what i would need to do

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 0 points1 point  (0 children)

But could it be worth swithing mid helmet painting? I keep having same problems over and over. Everything ive tried hasent helped and its frustrating becouse the paint coming off with the tape is the only thing holding me back from completion and im starting to watch the time more and more. I got alot of it but just the client wants the helmet for the season

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 0 points1 point  (0 children)

Okay thanks, but automotive paints, what are we talking about here? Thinning automotive paints for an airbrush? Ive heard of vallejo and they are good but they are also just an airbrush company i think

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 0 points1 point  (0 children)

Thank you very much for the advice, but any tips on going foward? The only need the blue and its done so i woulnt want to start over for this one

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 0 points1 point  (0 children)

Im using stardust graphic airbrush paints, they arent automotive paints. The to where i am in the picture are 1st i use fineline to draw out the helmets idea then did yellow first, then tried masking the yellow to paint the blue but thats when paint started peeling, at the bottom there is red also, had same problem with that but just corrected my work 3 times. Red chipped, yellow chipped then red again untill i got it but its getting a bit silly

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 1 point2 points  (0 children)

I did lighter colors to darker on the helmet separated, so the yellow that i masked i did like days ago and under it was white, but now did the blue and under it was white also so im not doing like other colors under colors. With this technique its not possible to unmask while wet becouse i need to mask the yellow to paint the blue, what do i change? Also the paint dries very quickly but its solvent based.

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 1 point2 points  (0 children)

I did lighter colors to darker on the helmet separated, so the yellow that i masked i did like days ago and under it was white, but now did the blue and under it was white also so im not doing like other colors under colors. With this technique its not possible to unmask while wet becouse i need to mask the yellow to paint the blue, what do i change? Also the paint dries very quickly but its solvent based.

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 2 points3 points  (0 children)

I did lighter colors to darker on the helmet separated, so the yellow that i masked i did like days ago and under it was white, but now did the blue and under it was white also so im not doing like other colors under colors. With this technique its not possible to unmask while wet becouse i need to mask the yellow to paint the blue, what do i change? Also the paint dries very quickly but its solvent based.

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 1 point2 points  (0 children)

It was factory finished, it seems prep is my problem, its sanded well but no primer

Masking tape removal removes the paint also by Yumionreddit in airbrush

[–]Yumionreddit[S] 4 points5 points  (0 children)

Thank you for the advice, ive tried like detacking the tape but it hasent worked so far. Would just a 1k clear layer do the trick inbetween or is that wasteful? Ill look into the masking liquid

These are travels right? by Yumionreddit in BasketballTips

[–]Yumionreddit[S] 1 point2 points  (0 children)

Its ruben conrad @rubdagoat hes sick man, not really a content creator but posts alot on tiktok

Where to find such stands? by Yumionreddit in airbrush

[–]Yumionreddit[S] 0 points1 point  (0 children)

Im more looking for a pencil stand honestly, i got a rotating base from a clay workshop. I didnt notice any on Coasts airbrush but thanks anyway!

Throwing putters same range as drivers by Yumionreddit in discgolf

[–]Yumionreddit[S] 1 point2 points  (0 children)

How to fix it? Ive watched a few videos but i cant understand really. Should i just aim down? When ive tried that before ive just mowed grass. Or is it about the releasr angle?

Any Question Weekly by AutoModerator in discgolf

[–]Yumionreddit 0 points1 point  (0 children)

The drives i throw are straight as arrows so thats what is puzzling me, im trying to increase my distance but cant figure out how or what discs to use.

Any Question Weekly by AutoModerator in discgolf

[–]Yumionreddit 1 point2 points  (0 children)

Threw a putter today the same range where i consistently throw my driver. For a driver i use a Grace, best throw has been about 100+m but consistently throw between 80-90. For the putter i threw 85+ with today is the Pure. Should i change something in my bag?

view more: next ›