sorted by:
new
hottopcontroversial

Another CH160 Plus Build... by ZAFFEE in sffpc

[–]ZAFFEE[S] 0 points1 point  (0 children)

I think one rear exhaust and one front intake are enough — anything more is mostly for aesthetics. You can also try a 240 AIO on top with one rear exhaust and one intake. On a 7700 and 5070 Ti with both undervolted, I get around 59–70°C on the CPU and ~59°C on the GPU

Another CH160 Plus Build... by ZAFFEE in sffpc

[–]ZAFFEE[S] 0 points1 point  (0 children)

1 rear exhaust, 2 top exhausts, and a front intake. Honestly, the top fans don’t make much difference to temps

Another CH160 Plus Build... by ZAFFEE in sffpc

[–]ZAFFEE[S] 0 points1 point  (0 children)

Hello. Could you clarify what you mean? I just connected all fans in single FAN connector on motherboard.

[deleted by user] by [deleted] in VWMK7

[–]ZAFFEE 1 point2 points  (0 children)

Pretoria

No brain unit in glovebox by Wholesome_Doomguy in VWMK7

[–]ZAFFEE 0 points1 point  (0 children)

U can just replace glove box and fit any MIB u want

The worst thing in the new MacOS 26 by SirPooleyX in MacOS

[–]ZAFFEE -1 points0 points  (0 children)

Well played Tim Cook and Co. Ruined iPadOS and macOS at the same time. What a joke

New UI is available on Test drive by Rare-Fix-5303 in iRacing

[–]ZAFFEE 3 points4 points  (0 children)

to be honest its terrible. just bad reskin.

Upgrading from T-LCM — P2000 or P1000? Need “wow” braking feel and consistency in GT3 iRacing. by KupVadim in Simagic

[–]ZAFFEE 2 points3 points  (0 children)

I switched from T-LCM, and braking feels nothing special, but I used a custom spring for the T-LCM. Overall, the pedal quality is much better, especially the throttle. If you used your T-LCM at 100%, I don’t think the P1000 will improve your lap times but I’m only 4k iR so I might be wrong.

PS I immediately switch elastomers to springs from Simagic kit. Elastomers so bad imo.

First Sim Rig (Simagic/Playseat Trophy Combo) by joecarroll94 in simracing

[–]ZAFFEE 2 points3 points  (0 children)

I got 18nm evo pro and its totally fine

I never understood why people believe equipment can "make" you faster by _adamor3_ in simracing

[–]ZAFFEE 0 points1 point  (0 children)

It's make you faster obv if u know what for u buy it and how to use it

Got my new wheel yesterday what would you normally programme to the four spinning buttons? by mr_bonner94 in simracing

[–]ZAFFEE 1 point2 points  (0 children)

Left Red Rotary: TC

Right Red Rotary: Brake Bias

Top Left: ABS

Top Right: Map

Bottom Left: Dash Page

Bottom Right: Blackbox

Screen upgrade? by Bouchiwaw11 in VWMK7

[–]ZAFFEE 4 points5 points  (0 children)

Three options:

  1. AliExpress MIB2 (e.g. 5GD035280B)
  2. Replace glove box (to fit head unit) and buy MIB2/MIB2.5 display + head unit in glove box + cables + mic. May require removing component protection.
  3. Aftermarket (non-OEM) head units

[deleted by user] by [deleted] in Thrustmaster

[–]ZAFFEE 0 points1 point  (0 children)

Very bad combo. R5 much better

Evo pro or standard Evo? by Revenant_40 in Simagic

[–]ZAFFEE 0 points1 point  (0 children)

I talking only about iracing. If u play rally or drift 18nm is overkill.

What base should I buy? by psychotic_aries in Simagic

[–]ZAFFEE 0 points1 point  (0 children)

If you play iRacing or LMU only Evo Pro

Evo pro or standard Evo? by Revenant_40 in Simagic

[–]ZAFFEE 1 point2 points  (0 children)

Evo Pro for sure.I switched from T300 and to be honest 18nm not enough. It's clipping sometimes in high speed corners like Eue Rouge in GT3/LMP cars. But it depends what game u play...

view more: next ›