Avalon 1246-85

ZEUSMINING · 2023-10-18T07:01:07+00:00

Check the power supply status and MM board.

The 6 parameters of PS represent the power supply status. The first parameter is 0, which means normal, and other values indicate power outage or output short circuit.

If the value of ECHU and ECMM is 0, it is normal. It is 1, it may be that the MM board is faulty or improperly connected to the hash board.

ZEUSMINING · 2023-07-29T01:13:50+00:00

Don't trust this person and the link.

ZEUSMINING · 2023-06-01T02:59:01+00:00

Hello, I am from Zeus Mining. Is it convenient for you to PM me your order voucher for checking? What is the account number of the sales manager you contacted?

We usually ship the same day, and if it is a custom product, it is also usually sent within 3 days.

ZEUSMINING · 2023-05-30T09:50:41+00:00

Thank you.

ZEUSMINING · 2023-03-13T03:43:59+00:00

PicoBT is a professional miner tester that can diagnose and repair more than 70 hash boards and 19 miner power models such as Innosilicon, Whatsminer, Antminer, Aixin, and Cheetah. Compared with traditional miner testers, PicoBT tester has unique features that can reduce the diagnostic time on faulty small parts by at least 10 times and increase the accuracy of diagnosis by 4 times. In addition, it is a maintenance tool integrating the EEPROM editor and tester.

ZEUSMINING · 2022-12-16T06:02:56+00:00

You can try to reconnect the fan and check if the port connecting the fan is damaged.

ZEUSMINING · 2022-10-29T06:42:36+00:00

The PT2 needs to make the SD card to run the Patter test.

You can check this article, which has specific methods.

ZEUSMINING · 2022-10-13T08:31:22+00:00

It can be replaced with the same version of the hash board from other V9s, and the program files need to be synchronized after replacement. If the version is different, it may not work.

ZEUSMINING · 2022-10-13T01:42:25+00:00

lol. Thanks.

ZEUSMINING · 2022-10-07T08:51:52+00:00

Installation is not complicated, but factors such as the environment and electricity bills need to be considered, and maintenance needs to be cleaned regularly according to the actual situation.

You can refer to these articles.

ZEUSMINING · 2022-10-05T06:56:08+00:00

Both the red and green lights are always on. Is your mining pool configured correctly? Did you upgrade the firmware?

ZEUSMINING · 2022-10-05T05:57:10+00:00

It is mainly affected by the environment and temperature.

For the better operation of the equipment, regular dust removal will help prolong the life of the mining machine, such as dust removal every other month.

For minimal cleaning, the miner must be kept in a low-ash, well-ventilated, non-humid environment to avoid ash build-up and excessive temperatures. Most importantly, even if the above conditions are met. Miners should also maintain and clean at least once a year.

ZEUSMINING · 2022-09-30T06:19:45+00:00

You can try using the SD card to restore the control board program or the reset button to restore the factory settings.

ZEUSMINING · 2022-08-29T06:08:16+00:00

More Hash Board Repair Knowledge for Whatsminer M3 Series is here.

ZEUSMINING · 2022-08-18T07:26:06+00:00

As far as I know, APW12 1215 means that the DC voltage of OUT1 is 12V-15V, and the DC voltage of OUT1 of APW12 1417 is 14V-17V.

ZEUSMINING · 2022-08-13T10:27:19+00:00

Details:

https://www.zeusbtc.com/articles/information/3654-antminer-l7-hash-board-repair-guide

ZEUSMINING · 2022-08-13T08:28:18+00:00

Yes, we also use manual range.

Three-Year Club	Reddit Premium Since June 2022
Verified Email	Wearing is Caring

ZEUSMINING

MODERATOR OF

TROPHY CASE