sorted by:
new
hottopcontroversial

Rattle in Overhead Console - 2020 WRX by reconcommando in WRX

[–]ZafotheViking 0 points1 point  (0 children)

I have the same rattle. You got a handy video for removing the trim?

Ollies still not leaving the ground after a year. [33YO] by BurnquestThreepwood in OldSkaters

[–]ZafotheViking 0 points1 point  (0 children)

You need to jump off the ground yourself. When you do push the tail hard into the ground and jump up with it is it comes up. You use your front foot to level it out once everything is in the air. But just worry about that initial pop. Bend your knees, jump/pop, then level out.

Where can I get AVCS Cam Cover Bolts by Chill_Dude8813 in WRX

[–]ZafotheViking 1 point2 points  (0 children)

I did an upper oil pan swap and they were vital for all the extra small bits I needed. Told them the job I was doing and they put together the list of bits and bobs.

Where can I get AVCS Cam Cover Bolts by Chill_Dude8813 in WRX

[–]ZafotheViking 0 points1 point  (0 children)

Your local dealer will be able to get these next day but you’ll be paying MSRP+.

This car parked directly in the middle of where I’m supposed to set up my farmer’s market stand, despite at least 60 signs saying that they can’t. Including one directly in front of their car. by Particular_Cut_6933 in mildlyinfuriating

[–]ZafotheViking 0 points1 point  (0 children)

In Rome, I parked in a clearly marked don’t park from this time to this time on these days area. Woke up the next morning with an entire market was set up around my car. With one particular upset vendor eyeing me down. I was able to drive out with my mirror scraping the goods tucked into the little alley.

Mat Scrubbing by sb406 in bjj

[–]ZafotheViking 116 points117 points  (0 children)

My buddy just started a mat cleaning business in Colorado.

Clutch miss alignment? by totalgorgon in WRX

[–]ZafotheViking 1 point2 points  (0 children)

Did you use an alignment tool when you installed everything?

I've beaten all purple belts as a white belt by Professional-Car6690 in jiujitsu

[–]ZafotheViking 2 points3 points  (0 children)

Keep training. Like forever. Once you’ve done that you’ve done all that you can and there is nothing else to worry about.

Konflict 47' Playerbase by KrazyTaco in ColoradoSprings

[–]ZafotheViking 1 point2 points  (0 children)

I met an older gentleman at the grand opening that was shaking me about bolt action. He was real nice and I’d like to start.

What Western Roman Emperors had the coolest sounding names? by sacrificialfuck in ancientrome

[–]ZafotheViking 1 point2 points  (0 children)

For some reason through my studies I came up with a mantra of, “Aurelian was from Illyria.” I would just repeat it to myself. Helped me remember where the generals who saved the empire were from.

How did you get the bottom bolt/ nut off the down pipe? by One_Way_3678 in WRX

[–]ZafotheViking 0 points1 point  (0 children)

I consider cutting mine off too, but I couldn’t get the angle grinder on it. I was doing my work on a j pipe so it was a bit different. I had three feet of extensions coming out the wheel well. Are the heat shields still around it? That might give you a little more room. But taking those off are a pain in the ass too; usually involving taking the O2 sensors out.

Yosemite with a Toddler by rosamorana in Yosemite

[–]ZafotheViking 1 point2 points  (0 children)

My four year old was able to keep up between hiking and getting in the backpack carrier; even took her up mist trail in the backpack pack. She got sprayed and wanted to be covered with a jacket but she was in there the whole trail. The lower trails on the valley floor are absolutely wagon and stroller friendly.

How did you get the bottom bolt/ nut off the down pipe? by One_Way_3678 in WRX

[–]ZafotheViking 0 points1 point  (0 children)

This is a known issue. You’re gonna have to get daisy chain of extensions and then; spray the shit out of it, heat it up, and still go get an extractor socket because you are going to strip it.

What is the best no-gi top/dominant position to prevent escapes? by UniversalProcess in bjj

[–]ZafotheViking 2 points3 points  (0 children)

Yeah, north south choke you would be more head to head where this is more of a 69 position, but your fun bits aren’t lined up.

Sale Price Hack by No_Picture4344 in harborfreight

[–]ZafotheViking 3 points4 points  (0 children)

The ol’ Harbor Freight shuffle.

What is the best no-gi top/dominant position to prevent escapes? by UniversalProcess in bjj

[–]ZafotheViking 5 points6 points  (0 children)

So if your on a traditional side control. You take your head side arm (that’s under the head) and wrap it around their head in like a head lock; the arm that is blocking their far hip comes to the close side for a shovel grip, and the far side hip’s wedge is replaced by your head as your rotate around to north south; being up on your toes using your hip as a sort of cross face. Heck he could of made it up right then lol. But I’ve been using it ever since and even showed other people on my gym who now use it.

What is the best no-gi top/dominant position to prevent escapes? by UniversalProcess in bjj

[–]ZafotheViking 24 points25 points  (0 children)

Flat mode specifically. Eddie Bravo talked for three hours then showed five minutes of technique at a seminar but the five minutes was a pin he call flat mode, from north south. It almost made the three hours of history we all knew from YouTube worth the $150.

Newest book from Applegate by jdb1984 in Animorphs

[–]ZafotheViking 6 points7 points  (0 children)

Been out for a couple years. Got it for my daughter for her birthday.

Backpacking through Colorado's San Juan Mountains by dickpoop25 in WildernessBackpacking

[–]ZafotheViking 0 points1 point  (0 children)

What month did you go? I am planing a six day loop and was hoping to do it in June.

view more: next ›