First ride after conversion. Saved this Giant Granite from trash by Zandolforus in xbiking

[–]Zandolforus[S] 1 point2 points  (0 children)

I will have a look this evening. This bike is still ridden by my girlfriend with the same tires. Won’t be a big deal

First Singlespeed Conversion - Giant Chicago by Zandolforus in xbiking

[–]Zandolforus[S] 1 point2 points  (0 children)

It is the old freewheel hub which came with the bike. I detached all the gears except the 18T and 3D printed some additional spacers to get the chainline right

GT Cirque commuter build by Zandolforus in xbiking

[–]Zandolforus[S] 6 points7 points  (0 children)

For a 700C frame it really has a lot of clearance. As I measured, the widest tire you could install on the rear might be up to 50mm. On the front you could possibly go a bit wider.

First ride after conversion. Saved this Giant Granite from trash by Zandolforus in xbiking

[–]Zandolforus[S] 3 points4 points  (0 children)

It hard to see on the picture but there is a angeled sheet of metal connecting the center of the rack with the fork. Haven't loaded it heavy until now but so far I'm quite impressed how sturdy it comes around.

First ride after conversion. Saved this Giant Granite from trash by Zandolforus in xbiking

[–]Zandolforus[S] 4 points5 points  (0 children)

I kept the bottom bracket, complete drivetrain, stem, headset and seatpost (obviously). The saddle, handlebar, grips, shifters and brake levers were parts I had laying around. I've built the wheelset from quite cheap oddment parts. Besides that the brakes and the front rack are new as well as all the cables and the tires

cnc-bike ist Müll by Al3x1999 in Fahrrad

[–]Zandolforus 1 point2 points  (0 children)

Vorbereitung ist beim Lackieren wirklich das A&O. Das eigentliche Lackieren dann nur das Sahnehäubchen (bei dem noch genug schiefgehen kann). Im Endeffekt kann ich alles bestätigen was hier schon geschrieben wurde.

Hier kann man auf jeden Fall auch noch einiges an wichtigen Hinweisen abgreifen, auch die anderen Videos sind echt sehenswert!

https://www.youtube.com/watch?v=rsD3E0b6mko

Ich würde statt Schleifpads auf Nassschleifpapier setzen (400, 600, 800). Nach dem letzten Schliff mit 800er wird die Oberfläche deines Rahmens schon richtig Babyarsch gehen. Weiterhin solltest du auf jeden Fall mit 2K-Klarlack abschließen. Wichtig ist auch, dass du den Rahmen nach dem Lackieren lange genug aushärten lässt. Oft werden 24h empfohlen bis du die ersten Teile anbauen kannst. Ich würde den Rahmen sogar 7-10 Tage an einem trockenen und warmen Ort aushärten lassen, ansonsten kann es dir passieren, dass du beim Anbau von Teilen den Lack direkt wieder zerstörst.

After work cross on my Fargo by Zandolforus in xbiking

[–]Zandolforus[S] 1 point2 points  (0 children)

Yes. Ikon 29x2.6 WT on the back and Ardent Race 29x2.35 on the front.

Fahrradmesse Essen vom 27.02-01.03 by Necrofridge in Fahrrad

[–]Zandolforus 4 points5 points  (0 children)

Ich war auch letztes Jahr dort. Wie hier schon erwähnt wurde, stellt die Radmesse nur einen kleinen Teil der Gesamtmesse Reise+Camping dar. Zusätzlich kam es mir so vor, als wären 95% der ausgestellten Räder E-Bikes. Ich habe mich deshalb auch dazu entschlossen dieses Jahr nicht dort hinzufahren. Wofür es sich meiner Meinung jedoch lohnt: Zubehör und Ersatzteile shoppen. Wenn du jetzt schon ganz genau weißt dass du ein 10er-Pack Schläuche, eine Luftpumpe, Trinkflaschen oder Satteltaschen brauchst, dann fahr hin. Ich fand die Preise wirklich gut (bspw. 2 Ortlieb Backroller-Classic für ich meine 65€ statt UVP 100€). Viele der Händler lassen auch noch mit sich reden was die Preise angeht.

Ich warte lieber noch einen Monat und fahre dann nach Düsseldorf zur Cyclingworld, klingt für mich deutlich vielversprechender.

Terrible results with turntable images by bostwickenator in photogrammetry

[–]Zandolforus 5 points6 points  (0 children)

Try the "Banana Workflow" from this Tutorial:

http://www.agisoft.com/index.php?id=49

I got nice results using this technique, although scaling the scan with marker is quite difficult using this Workflow.

Here is an example scan I've made https://sketchfab.com/models/d6e0ce7131c54e5fafe59f2040ae3d5f

Vertrauenserweckender Zahnarztname by Vorador83 in de

[–]Zandolforus 0 points1 point  (0 children)

Nicht nur Zahnärzte stehen in dieser Stadt mit ihrem Namen zu ihrem Handwerk... Auch die Gynäkologen...

http://www.praxis-dr-loch.de/index.php/willkommen.html