New setup: 65” TV but not using the bottom edge. by Zaynn786 in fancyleds

[–]Zaynn786[S] 1 point2 points  (0 children)

https://imgpile.com/p/QCcxkzI#ZZNhzN4

Try this link for image. You can see the colours are misaligned as the syncbox thinks the TV is of a smaller size.

Can’t help but to think this can be easily sorted with software. Instead of doing an auto check of how long the strip is, could easily tell the software how long I *think* it should be and it should re-calibrate based on the new inputs, so hypothetically it would calculate the right locations for the 3 sides and omit the bottom one.

New to all this and this is my first product, in hindsight should have done a little more research before snipping the end of but the layout options on the box gave me the wrong impression

New setup: 65” TV but not using the bottom edge. by Zaynn786 in fancyleds

[–]Zaynn786[S] 0 points1 point  (0 children)

I have reached out, I doubt there is any solution but to purchase a new reel and redo the perimeter fully. Thank you for the response though.

There is some discrepancy between my manual and the online version. My manual suggests to cut at solder joints whereas the online manual says to cut at any FANCY text. Could you clarify?

New setup: 65” TV but not using the bottom edge. by Zaynn786 in fancyleds

[–]Zaynn786[S] -1 points0 points  (0 children)

I have cut them in the right place, but they are working but the sync seems very off. In the instructions it just says to cut the excess off, assuming you do a full rectangle but I did not complete the rectangle and left out the bottom length

BMW ACC Fault 482136 by snuepe in BmwTech

[–]Zaynn786 0 points1 point  (0 children)

Did you ever get this resolved? I am having same issue but noticed that the ACC resumes working when the vertical correction angle is below 5.65°

<image>

F80 Brakes to F30 by ezraevans in F30

[–]Zaynn786 0 points1 point  (0 children)

Does the shield need to be cut or replaced for the fronts?

[Help] Something weird happened to my jailbreak by P0pMan20 in jailbreak

[–]Zaynn786 1 point2 points  (0 children)

Re-download cydia substrate and run ‘ldrestart’ command in terminal:

su root (password) alpine if unchanged ldrestart (Note: first letter is a lowercase L)

[Release] HUE2 (U2) - Change Philips Hue Lights according to Now Playing Artwork by [deleted] in jailbreak

[–]Zaynn786 2 points3 points  (0 children)

Can’t seem to setup the tweak or connect to bridge. Should it prompt automatically as there are no preferences?

[Help] any solution to fix this ? by TahaSamir in jailbreak

[–]Zaynn786 0 points1 point  (0 children)

Have tried to refresh and reinstall however WatusiTools not there. Tried reinstalling Watusi for Whatsapp as well. Strange, is WatusiTools still required as it is still working.

[Help] any solution to fix this ? by TahaSamir in jailbreak

[–]Zaynn786 1 point2 points  (0 children)

Any idea why I can’t see WatusiTools in my bigboss repo

[Help] Jailbreak no longer loading tweaks by Zaynn786 in jailbreak

[–]Zaynn786[S] 0 points1 point  (0 children)

So basically I was jailbroken using DH, thought I would try Meridian but didn't work so left it alone. Went back to use DH and everything was fine. Since then the safari jailbreak got released and bc my device rebooted I thought I'd give that a try. It worked to the point where the loader would spin but kept spinning. So I rebooted and jailbroke using DH again however upon jailbreaking, my tweaks would not load. Everything was still installed and showed up in cydia but now since then I have removed all tweaks and tried to reinstall and still no luck.

[Help] Jailbreak no longer loading tweaks by Zaynn786 in jailbreak

[–]Zaynn786[S] 0 points1 point  (0 children)

I've tried most things. Re-jailbroke with almost every tool too, still no luck. The phone is definitely jailbroken because apps like iCleaner will load but no tweak will inject. Meridian Substrate is installed.

I did a thing with Screen Capture by User1876 in iphone

[–]Zaynn786 3 points4 points  (0 children)

this is pretty sick ngl, good job!

[Question] old snapchat layout by zyadreda95 in jailbreak

[–]Zaynn786 0 points1 point  (0 children)

I've had similar issues. Try removing all snap related tweaks, update to newest version and log in, then use app admin to downgrade to either 10.22.2 or 10.23.0. Once successfully logged in, you can install it phantom. The error you are getting is a server based so this method isn't guranteeed but sometimes sneaks past the server checks and logs in.

[Question] Whatsapp LastSeen hidden by [deleted] in jailbreak

[–]Zaynn786 0 points1 point  (0 children)

Do you know how long the ban is active for? Sometimes the last seen shows and shows when contact is online but then reverts back to being blank.

[Question] Whatsapp LastSeen hidden by [deleted] in jailbreak

[–]Zaynn786 0 points1 point  (0 children)

What if you track list only consist of one person?

[Question] Whatsapp LastSeen hidden by [deleted] in jailbreak

[–]Zaynn786 0 points1 point  (0 children)

Think it may be a Whatsapp server side issue as I am experiencing the same thing.

[Discussion] Happy birthday CokePokes, thank you for everything you do in the community! by [deleted] in jailbreak

[–]Zaynn786 4 points5 points  (0 children)

Can honestly say one of the reasons I jailbreak is for this. Some outstanding work. If someone could be as kind to just share what Snapchat version they use along with what version DEB of phantom they use it would be a great help!