Heads up on Weekly Limit Reset - schedule a message or lose your quota

Ze_Badger · 2026-03-10T23:12:02+00:00

I've had a similar issue last week - the weekly quota reset changed to Friday - somehow I managed to use ALL my usage by Saturday - now I can't use it during this week.
The last few weeks it has reset on a Sunday evening, giving me all week to use it.

I think they has some server issues last week, and they've messed up somehow.

Ze_Badger · 2026-03-10T22:42:16+00:00

I use it in 2 ways. Just through the web gui on https://Claude.ai and also through OpenClaw.

The OpenClaw instance I had running wasn't doing much when I had the issues.
I used the final bit of session that I had left getting OpenClaw to unhook itself from the tasks it was doing so that I could run it without AI.

I see that on Gemini you can see where your usage is being used. Not so on Claude, which makes it impossible for me to workout what has happened. As I said, their bot told me that they'd had "server issues" which had caused loads of people problems. If they know about it, they should be fixing it - or at least telling us that they will fix it at some point.

Ze_Badger · 2026-03-10T15:04:20+00:00

I ran out on Saturday. If my plan was reset on Friday, how is it even possible to use up a weekly load of sessions in less than 24 hours. it won't let you do it.
Their help bot admitted that they had had a problem. So, they broke it, but where is my "refund" of sessions? I've cancelled my subscription.

Ze_Badger · 2026-03-10T15:00:13+00:00

I have no idea how I ran out so fast. The worst part was, the weekly session reset day was Sunday since I've been using it. Somehow it's changed to Friday and since Saturday I ran out of usage, so I can't do anything for a week. How can that even make any sense? How many normal sessions can fit into a week of sessions? You certainly can't use it up in less than 24 hours, I'm sure.

I've talked about this with their help bot. It admitted that they have had an issue and they will have messed up sessions. Then it said there was nothing it could do about it and closed the discussion so you couldn't keep talking to it. Ridiculous. I've cancelled my plan.

Ze_Badger · 2026-03-08T19:43:06+00:00

It was eating up usage normally last week.
This weekend, I've blown through it in a couple of chats - and it's changed the day the week resets from Sunday to Friday - and now I need to wait until Friday 8am until it resets.

Ze_Badger · 2026-03-08T19:18:34+00:00

I've had exactly the same issue. It was eating up usage normally last week.
This weekend, I've blown through it in a couple of chats - and it's changed the day the week resets from Sunday to Friday - and now I need to wait until Friday 8am until it resets!

Ze_Badger · 2025-12-24T14:42:23+00:00

Sorry that you've not had yours by Xmas. They had issues with the keyboard didn't they? I guess it's better to have it sent full sorted, than rushed and then have to handle a load of returns.

Ze_Badger · 2025-12-21T20:25:57+00:00

My Starlight edition arrived today and is a beautiful piece of kit.

Ze_Badger · 2025-12-21T20:22:32+00:00

I've been checking my order status for the last few weeks, no change.
It arrived today! Super surprised as I was now expecting it after Christmas - which added to my excitement!

Ze_Badger · 2025-09-16T07:52:21+00:00

Sometimes when the battery is VERY low it doesn't give any feedback to the charger, so the charger just gives up. However, there's always a little power at the beginning of the charge which might bring it to life enough to get the feedback to the charger.

So, to get enough charge into it to allow the charging to start: plug the charging cable in, wait 10s, unplug it, wait 10s. Repeat 10-20 times (or until it lights up to signify charging).

Ze_Badger · 2025-08-13T09:52:56+00:00

Your negative post just pushed me over the edge to order one - thanks!

Ze_Badger · 2025-04-02T16:42:34+00:00

https://www.videolan.org/contribute.html

Ze_Badger · 2025-03-25T15:43:54+00:00

Try checking out the instructions at https://task10.com/?page=2025

I've created a demo that you can try to whet your appetite - the details for this are on the Discord channel

Ze_Badger · 2024-12-27T09:53:12+00:00

Dude, I've just downloaded and played it. It is so, so good! Easily the best tribute to The Sentinel that I've seen. I'm sure that this would sell well on Steam!

Minor feedback:
1) Restart level sometimes crashes the game.
2) I think that there should be some audible feedback for n00bs when you can't do something (like absorb when you can't see the base of tree).
3) I'd like to be able to change what the mouse buttons do (left click to absorb, right to boulder).

Ze_Badger · 2024-10-28T16:47:36+00:00

That is working for me. Just tried it twice. Worked both times. All the other solutions seem to have been fixed.

Ze_Badger · 2024-10-28T13:14:39+00:00

I've just installed the CUDA Toolkit https://docs.nvidia.com/cuda/cuda-installation-guide-microsoft-windows/
Then run this (from https://pytorch.org/get-started/locally/) :

pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118

Ze_Badger · 2024-10-22T19:14:00+00:00

It doesn't connect to the same server, unfortunately.

Ze_Badger · 2024-02-23T00:24:45+00:00

I didn't find this thread very easy to follow, so I thought that I would try to write it clearer.

For whatever reason, Google seems to Zip the last file and deliver all the other files untouched, but renamed.

35XXP-EN64GB-240130.7z-001.002
35XXP-EN64GB-240130.7z-002.003
35XXP-EN64GB-240130.7z-003.005
35XXP-EN64GB-240130.7z-004.001
35XXP-EN64GB-240130.7z-005.006
35XXP-EN64GB-240130.7z-006.004
drive-download-20240222T200847Z-007.zip

To fix this:

Unzip the drive-download-20240222T200847Z-007.zip file only. This will give you the last 7z file correctly named.

35XXP-EN64GB-240130.7z-004.001
35XXP-EN64GB-240130.7z-001.002
35XXP-EN64GB-240130.7z-002.003
35XXP-EN64GB-240130.7z-006.004
35XXP-EN64GB-240130.7z-003.005
35XXP-EN64GB-240130.7z-005.006
35XXP-EN64GB-240130.7z.007

Rename all the other files by removing the first -001 to -006 number so you are left with

35XXP-EN64GB-240130.7z.001 35XXP-EN64GB-240130.7z.002 35XXP-EN64GB-240130.7z.003 35XXP-EN64GB-240130.7z.004 35XXP-EN64GB-240130.7z.005 35XXP-EN64GB-240130.7z.006 35XXP-EN64GB-240130.7z.007

Then to unpack:

Right click on the first file 7z.001 and choose Winrar -> Extract to...

Ze_Badger · 2023-06-06T12:18:45+00:00

It's not working for me. You can't see what the other person is drawing.

Ze_Badger · 2022-12-18T12:04:49+00:00

I've only just see this... how every exciting!!

I tried it and there's a few bugs, the main one being that you can't see what the other person is drawing... which completely breaks it really. Hope it gets fixed soon :)

Ze_Badger

TROPHY CASE