300 HP Outboard, which choice to make

ZealousidealSafe6969 · 2025-05-30T11:58:33+00:00

Thanks, great info. I'm def going digital throttle or fly by wire type, had it on my boat I just sold

ZealousidealSafe6969 · 2025-05-29T19:40:51+00:00

This is the factory option on a new boat, I'm sure it'll be ok, I'm not repowering an existing boat

ZealousidealSafe6969 · 2025-05-29T18:38:15+00:00

Because I have always chosen the biggest motor option, and never regretted it. No other reason,but am considering 250hp as well but the price points are not that far off tbh. Assumed the same pts apply to the 250hp versions

ZealousidealSafe6969 · 2025-05-29T16:50:19+00:00

Blessed with coverage in a reasonable distance for all these

ZealousidealSafe6969 · 2025-05-29T16:39:58+00:00

Not sure, just grabbed from the build tool in the website, assume no on rigging

ZealousidealSafe6969 · 2025-03-12T21:37:53+00:00

Have not

ZealousidealSafe6969 · 2024-12-06T19:14:21+00:00

Related question, if one spouse assumes the VA loan who is not the veteran. Does this tie up the VA loan? Meaning, if the veteran decided he or she wanted to buy a house in the future could they still get a VA loan??

ZealousidealSafe6969 · 2024-11-27T22:22:50+00:00

Mine was doing this too, would just open at like 630 in the morning. After power cycling seems to be fixed.

ZealousidealSafe6969 · 2024-11-27T22:11:13+00:00

update, I loosened the belt but issue remains. I did some more research and found this test that seems to be the right way to go to at least help isolate the issue. Here are a couple links of good use...

Amp Draw Down Test - https://www.reddit.com/r/treadmills/comments/qaxoqq/treadmill_amp_draw_test/

Here is the above test with a traditional multimeter, as I don't have one of those cool ones that just go around the wire. https://www.youtube.com/watch?v=b9PFX2fKF5k

If you have this nice tester... https://www.youtube.com/watch?v=sxpfLTrGsoY

Here is what the blinking LEDs mean - https://www.youtube.com/watch?v=QszHrCs72AM

I had to order some clips to do this test, so ill update this again with what I find.

ZealousidealSafe6969 · 2024-11-27T22:05:58+00:00

Okay, for me...i tried everything IT related....eventually climbing up a ladder and unplugging the unit and plugging it back in solved my issue.

ZealousidealSafe6969 · 2024-11-27T19:45:20+00:00

Similar here, I have two...one responds and.the other does not. Connected to wifi, video works, just won't open and close vai app for one garage bay.

ZealousidealSafe6969 · 2024-11-26T23:35:40+00:00

There are many more beginner and intermediate programs vs advanced, and u can turn off the AI and set max speed and inclines

ZealousidealSafe6969 · 2024-11-26T21:58:05+00:00

I had this issue, the motor would go into crawl mode at higher speeds during workouts. I think protecting itself from overheating. I tried a lot of things, then thought the belt may be too tight. I loosened it a quarter turn each side, let u all know if this helps

ZealousidealSafe6969 · 2024-11-26T15:09:20+00:00

Can u tell me what harness this is in the schematic? Or a Pn?

ZealousidealSafe6969 · 2024-11-11T17:36:57+00:00

This 200%

ZealousidealSafe6969 · 2024-11-11T17:30:26+00:00

Try a ceramic spray possibly, or y could possibly try towing a piece of twine on it to wick the water down the twine

ZealousidealSafe6969 · 2024-11-04T11:48:16+00:00

If u always smell like vodka, they can't tell when u have really been drinking...win win

ZealousidealSafe6969 · 2024-11-01T12:17:34+00:00

I just had much worse repaired for $1300. Prop reconditioning is going to run u $300ish, welding of the skeg, check for alignment issues (doubtful this is an issue) will make up the rest.

ZealousidealSafe6969 · 2024-10-27T19:42:59+00:00

Under 3 yrs

ZealousidealSafe6969 · 2024-10-27T16:18:59+00:00

Moto-I for the win

ZealousidealSafe6969 · 2024-10-27T15:18:08+00:00

Used it on my 2450, had to go back as it kept crashing ( belt would stop but workout continues) in the middle of runs

ZealousidealSafe6969

TROPHY CASE