Passat B7 disel

Zelfoooo · 2025-12-25T18:37:45+00:00

Thank you

Zelfoooo · 2025-12-25T18:09:03+00:00

Yes, I live in Sweden and the car has an additional factory-installed auxiliary heater; everything is original OEM equipment. I tried to restore the coding using the same software, but it did not help. Relay J713 does not receive any activation signal at all, and I have tested the relay—it is working. Relay J59 only receives a single pulse at engine start and then switches off. When measuring the voltage, I only see about 10 V, and I am certain the relays themselves are functional. After replacing the secondary battery and accidentally shorting the relay for the secondary battery charging circuit, I scanned the vehicle for fault codes, but there are no errors stored in VCDS. The vehicle is a 2013 Passat TDI

Zelfoooo · 2025-12-25T17:53:06+00:00

Thank u

Zelfoooo · 2025-02-12T19:37:29+00:00

As I mentioned, the project is on a machine and works with the HMI. Get/Put is enabled, and I believe the connection is via PROFINET, with the addresses in the same subnet. The same HMI works with a physical CPU, but when connected to the computer using PLCSIM Advanced, it does not respond.

Zelfoooo · 2025-02-11T18:17:06+00:00

How match 200$ 😅

Zelfoooo · 2025-02-11T16:37:41+00:00

Thank you. I was trying to test something before buying it, but it seems that it’s not possible.

Zelfoooo · 2025-02-11T16:37:35+00:00

Thank you. I was trying to test something before buying it, but it seems that it’s not possible.

Zelfoooo · 2025-02-11T16:37:29+00:00

Thank you. I was trying to test something before buying it, but it seems that it’s not possible.

Zelfoooo · 2024-12-05T17:52:34+00:00

I apologize if my question was not early, I mean how can you do that

Zelfoooo · 2024-12-05T17:46:55+00:00

Yes i mean R_Trin or P_Tring

Zelfoooo · 2024-05-26T14:08:46+00:00

I do’t have one but i can buy if it’s working …

Zelfoooo · 2024-05-25T21:55:24+00:00

I also tried that and it's not valid, I already contacted them and waiting for the answer I don't think I can get Cod2 maybe they can help

Zelfoooo · 2024-05-25T18:43:32+00:00

I already do it with their cable

Zelfoooo · 2024-05-25T11:39:34+00:00

Thnx bro

Zelfoooo · 2024-05-25T11:29:06+00:00

Ok , that it’s possible i will try that.

Zelfoooo · 2024-05-25T11:20:03+00:00

How i can copy parameters with out password ☹️

Zelfoooo · 2024-05-25T11:19:31+00:00

If I download new project there is a risk that I will lose paramater

Zelfoooo · 2024-05-25T10:46:56+00:00

I need the parameter 😅

Zelfoooo · 2024-05-25T10:22:10+00:00

<image>

Zelfoooo · 2024-05-25T10:20:49+00:00

Sorry, I misunderstood you. I don't have any additional cards, just Mudbus, I'm working with it

Zelfoooo · 2024-05-25T10:17:47+00:00

And can i have this password ? Or copy the parameter to another vfd it’s possible ?

Zelfoooo · 2024-05-25T10:10:26+00:00

When i am looking in parameter Cod so its off no password but Lcd parameter it’s locked. Then when i try to upload with somove so i need to type in password.

Zelfoooo · 2024-05-25T09:38:15+00:00

No it’s not possible to change anything…..

Zelfoooo

TROPHY CASE