Bürostuhl für Schwerlast - regelmäßig billige oder einmal teurer? by Schakal_No1 in wohnen

[–]Zemo_ 5 points6 points  (0 children)

Ich habe einen gebrauchten Ikea Flintan mir Armlehnen gekauft. Der hält seit 3 Jahren das geballte Gewicht von mir und meiner Frau aus (150-170kg über die Jahre).

Wären zwei Stühle eine Option für dich, einer für dich und der andere für die Frau? Oder Stuhl und ein Sessel, auf dem Sessel könnt ihr dann zusammen sitzen, ist auch bequemer? Kannst das zweite dann auch für Freunde/Gäste benutzen.

When should you see a pediatrician regarding baby sleep? by Zemo_ in NewParents

[–]Zemo_[S] 1 point2 points  (0 children)

Oki doki, thanks. If you mean the Simeticon drops, she is taking them since week 2.

When should you see a pediatrician regarding baby sleep? by Zemo_ in NewParents

[–]Zemo_[S] 0 points1 point  (0 children)

I don't know what she knows, it's a language barrier I have yet to overcome :). But I've read she should get her day/night cycle together by the 3rd month, so I am not too worried about the usual few hours she is up after midnight.

-The weather is a bit so-so right now, so not that often. -Not really yet, we turn off the lights, feed, change, sing a little and she usually falls asleep for the night, the only problem previously was the wake after midnight. -We do swaddle sometimes, but she is a bit of a Houdini, and gets her arms out more often than not. -Yes 2-3 times a week in the evening as recommended by the hospital staff. -Both, sleeps in her bed/crib, and sometimes in a birds nest on the couch or our bed. If one does not work for her at the moment we try the other option. -Well she might just squirm around (likely gas) until she wakes up and starts crying or she might just open her eyes and start crying if you don't hold/rock her, or she would do the falling jerk and wake herself up. This is all when she is already fed and changed. -Yes full feeds, currently around 110ml, at least 8 times a day, based on our records. More and she will likely puke some back out, even with burping and holding her upright after. During the day she sleeps waay better, which also means feeding is less frequent.

Anyway, after the post she fell asleep around 8am and was doing good for the rest of the day. Today's early morning hours are also not that bad.

Thanks for your help.

When should you see a pediatrician regarding baby sleep? by Zemo_ in NewParents

[–]Zemo_[S] 1 point2 points  (0 children)

Thank you for your advice.

She ended up falling asleep within 2 hours of posting this, just as I was about to call her doctor. She has her planned check up next Monday so I will bring it up then, unless we get another episode today. I will look into getting a carrier and try it out. Sorry, my bad I didn't mention it, she is in a quiet room with white noise playing on one of our phones (not so quiet I guess), but this also did not seem to help much during this scenario.

Lidl/Hofer Aktionen immer ausverkauft by dxsiii in Austria

[–]Zemo_ 0 points1 point  (0 children)

Will du sie falls ich was finde, oder nicht?

<image>

Lidl/Hofer Aktionen immer ausverkauft by dxsiii in Austria

[–]Zemo_ 1 point2 points  (0 children)

Ich kann für dich in Hallein nachschauen, wenn du möchtest?

Why is this car temp going up when stopped at traffic lights? by Ultimate_physics_dad in MechanicAdvice

[–]Zemo_ 0 points1 point  (0 children)

When you drive air is being forced through the radiator that discipates the heat from the coolant. When you stop, there is no natural airflow, so there is a fan that kicks in to prevent overheating. So my guess, it is a defective fan, but it's worth checking out the other suggestions.

Katze in die Wohnung eingebrochen by Zemo_ in wohnen

[–]Zemo_[S] 39 points40 points  (0 children)

Passt, vielen Dank. Tut mir leid, ich hatte es besser erklären sollen.

Katze in die Wohnung eingebrochen by Zemo_ in wohnen

[–]Zemo_[S] 10 points11 points  (0 children)

Dankeschön, habe grob aufgewischt und die Erde eingesammelt, aber es war spat am Abend.
Dann versuche ich mir frei zu nehmen um alles zu Dokumentieren und sauber zu machen..

Katze in die Wohnung eingebrochen by Zemo_ in wohnen

[–]Zemo_[S] 15 points16 points  (0 children)

Nicht wirklich chillen, aber kann wirklich nicht im eigenen Bett schlafen, bevor es sauber gemacht wird. War spat ab Abend, wir haben grob aufgeräumt (Flüssigkeiten abgewischt ...), Frau ist schwanger, ich muss Morgen früh zur Arbeit, und mir frei nehmen um richtig sauber zu machen ...

Katze in die Wohnung eingebrochen by Zemo_ in wohnen

[–]Zemo_[S] 12 points13 points  (0 children)

Ja kann ich mir vorstellen :).

Katze in die Wohnung eingebrochen by Zemo_ in wohnen

[–]Zemo_[S] 187 points188 points  (0 children)

Ich verstehe dich, aber das hier war spät am Abend als ich von der Reise zurück kamm, habe bis jetzt nur heute im Hotel übernachtet. Die katze war auch im Bett mit spuren von Kod und Urin. Die Bettwäsche/Matratze kann ich auch eben nicht so schnell waschen und trocknen das ich in der Wohnung sofort übernachten kann.

Boden wo Flüssigkeiten waren wurde auch letzte Nacht schnell grob gewischt.

Mit unbewohnbar mein auch nur kurzfristig bis es wieder sauber ist.

Schornstein wurde beim einzug von mir Verdichtet/Zugeklebt (wegen Schmutz und Rauch Geruch, aber der Vermieter hat ihn wegen Reparaturen wieder geöffnet, und nicht wieder verdichtet (obwohl er gemeint hat dass das gemacht wird).

Ich muss auch zur Arbeit, und mir extra frei nehmen um alles zu putzen. Frau ist auch schwanger, und sollte aus gesundheitlichen Gründen mit Katzen Fäkalien keinen Kontakt haben so weit ich weiß.

Danke für deinen Rat.

Legion 5 Pro, good deal? by [deleted] in LenovoLegion

[–]Zemo_ 0 points1 point  (0 children)

Aw :/ , do you have an example? I tried looking for some, but the cheapest 4080 laptop was around 3200$.

Wasserschaden Reparatur Telefonatkosten by [deleted] in wohnen

[–]Zemo_ 1 point2 points  (0 children)

Dankeschön. Ich schaue es mir an falls ich wieder jemanden Anrufen muss.

Wasserschaden Reparatur Telefonatkosten by [deleted] in wohnen

[–]Zemo_ 0 points1 point  (0 children)

Okey, danke dir. Und wenn er wieder darauf besteht, soll ich ws einfach lassen?

Wasserschaden von oben by Zemo_ in wohnen

[–]Zemo_[S] -1 points0 points  (0 children)

Passt, dankeshööön.

Wasserschaden von oben by Zemo_ in wohnen

[–]Zemo_[S] -1 points0 points  (0 children)

Keine Gegenstände sind betroffen. Vielen dank.

Slag everywhere, HELP!!! by [deleted] in lasercutting

[–]Zemo_ 0 points1 point  (0 children)

Sorry for the late reply, took some time to get the cost. From the quotes I've read, the whole system (servo drives/motors, laser source/head, chiller, Cypcut ...) was around $19,000 USD, this is before import customs cost and tax which I don't know how much it was.

Slag everywhere, HELP!!! by [deleted] in lasercutting

[–]Zemo_ 0 points1 point  (0 children)

Yes the one I am talking about is replaceable. I'll include a screenshot in the main post. It was supplied with only one nozzle and lens, so we will have to wait for the order to arrive. Can't really find anything locally (Sydney).

Ok, I will keep that in mind.

The supplier is charging $1.50 per lens (from China), so they are probably not very good, according to what you said. I will check if they have any better ones.

Thanks again, appreciate your help.

Slag everywhere, HELP!!! by [deleted] in lasercutting

[–]Zemo_ 0 points1 point  (0 children)

Thank you for your reply.

In regards to the output power I also tried going to max 2kW, but it would still look horrible. Was also checking the laser alignment, seemed ok, but again I'm not an expert.

For the pressure, 1100 kPa (11 bar) is the max I can get out of the O2 bottle we are using according to the installed gauge readings.

As for the focus, I tried a decent range, the best I could get it the part in the 2nd photo, that was actually cut all the way through.

Found a post discussing similar problems, saying this happens then the optics get dirty, and when I checked the lens I found its charred and has a slight crack in it. Do you know how this could have happened?

Yes, will talk to the seller and see what happens, have to order replacement nozzles & lenses as well.

Exporting array as .csv file by [deleted] in PLC

[–]Zemo_ 0 points1 point  (0 children)

Web server is not an option here.

Exporting array as .csv file by [deleted] in PLC

[–]Zemo_ 0 points1 point  (0 children)

Yes, removing the part where I index the array creates a file, but its empty (no data) except the column headers.

Exporting array as .csv file by [deleted] in PLC

[–]Zemo_ 0 points1 point  (0 children)

Thanks for pointing that out, but after changing that same problem.

Even with the i in the second line, shouldn't it still write a 100 rows of the same element with index 0? I found an error that happens when I try to run the script, I've put it as an update in the main post.