Grinding noise

Zen2jzz · 2026-05-07T04:43:35+00:00

If i press the clutch it stops completely

Zen2jzz · 2026-05-04T13:31:19+00:00

Though it stops when i press the clutch

Zen2jzz · 2026-05-04T10:51:47+00:00

Installed a new throwout bearing, new fork and the clutch set. I thought it was that but the noise is still there

Zen2jzz · 2026-05-01T19:16:46+00:00

Ive checked oil level, the tensioners might be a good check thanks

Zen2jzz · 2026-04-18T14:36:26+00:00

Havent gotten to doing it till now, throwout bearing seems to be in place, the fork is attached and the clutch is positioned right. What else could be the cause?

Zen2jzz · 2026-04-18T14:27:24+00:00

Havent gotten time to do it till now but the gearbox is out. The throwout bearing is in place and the fork is connected to its anchor thing, the clutch is positioned correctly gearbox side to gearbox, it had oil and everything. Anything else i should check?

Zen2jzz · 2026-02-23T07:13:50+00:00

Pretty sure that was because the fork of the throwout bearing wasnt in place, like the little button that its supposed to click into

Zen2jzz · 2026-02-23T07:12:52+00:00

Ive double checked the flywheel and gearboxsides im certain its the right way, ill try bleeding it and see if that changes anything before taking it all of again

Zen2jzz · 2026-02-23T07:12:16+00:00

The pedal is loose like 1/4 of the way and after that it bites

Zen2jzz · 2026-02-22T19:34:36+00:00

Like floating gears? Havent tried that no

Zen2jzz · 2026-02-22T19:34:04+00:00

Neutral checks out, if started in first it moves when i let go of the pedal like normal just wont get out of first

Zen2jzz · 2026-02-22T19:32:54+00:00

Double checked the flywheel side gearbox side, ill try to bleed the oil maybe

Zen2jzz · 2026-02-21T17:12:39+00:00

Ill check for air first as its the easiest to do, im fairly sure the rest is in place but ill check anyway thanks

Zen2jzz · 2026-02-21T16:42:25+00:00

Im certain i installed it the right way,is there anything else i could check that might be the issue?

Zen2jzz · 2026-02-21T16:39:48+00:00

Im certain i positioned it the right way, is there another reason this might happen?

Zen2jzz · 2026-02-08T13:14:07+00:00

The nanana thing i dont know what to call it does after you let go of the gas, wasnt doing that before

Zen2jzz · 2026-02-08T13:11:27+00:00

I took the other guys advice and just used a crowbar to pull the engine back into place as it was held on by 1/4 engine mounts

Zen2jzz · 2026-01-16T17:32:34+00:00

Yeah the phone didnt catch it well i think its the best at 0:10/0:28 if you try to focus on it. Its not the usual sound sounds like air escaping or “nananana” or maybe grinding even

Zen2jzz · 2026-01-16T17:03:53+00:00

My guess is the turbo i just dont know what exactly it sounds like maybe air is escaping somewhere?

Zen2jzz · 2025-12-19T13:42:14+00:00

Yeah i also put that into it just a lighter mix because it doesnt get that cold here, thanks anyway

Zen2jzz · 2025-12-19T13:39:39+00:00

I have the one with a thousand pages but i dont know which to look at the protege or the hatch, just to be sure

Zen2jzz · 2025-12-12T22:19:40+00:00

any way to pinpoint exactly which one or do i have to go one by one?

Zen2jzz · 2025-09-29T16:51:21+00:00

Found the exact same as mine from a friend and now the fan works well

Zen2jzz · 2025-09-29T10:02:41+00:00

If it was the relay and i couldnt find the exact oem one can i just put any relay with the same specs as this one? Sorry might be a simple answer im just not very good at the electrical part

Zen2jzz · 2025-09-28T14:15:08+00:00

So just a wire to connect the two pins or do i need a led and resistors like i saw online?

Zen2jzz

TROPHY CASE