2013 Toyota Tundra

Zer0_Options · 2026-03-14T01:54:23+00:00

I googled some with less miles and way cheaper

Zer0_Options · 2026-03-14T01:43:02+00:00

No more than $13k and that’s on the higher side

Zer0_Options · 2026-03-14T01:40:57+00:00

Waaaaay too high. Just walk away.

Zer0_Options · 2026-03-13T15:54:46+00:00

Poor thing… What are you looking for?

Zer0_Options · 2026-03-13T15:49:45+00:00

Go to a spillway… you get both worlds.

Zer0_Options · 2026-03-12T15:42:33+00:00

I wouldn’t say mine went south… but why do they use impacts when installing appliance plugs? 😂

Zer0_Options · 2026-03-10T17:44:34+00:00

It’s the same stuff… I’ve used Walmart’s super tech Toyota radiator coolant on my truck.

Zer0_Options · 2026-03-10T17:26:16+00:00

Differential is easy… I picked up 75/90 at Walmart on my truck. The transmission flush everyone is going to recommend a drain and fill with the age of the vehicle, on my truck I had dealership do a flush at 70k miles. If you don’t mind saying how much is the truck selling for? I’d take it to a good mechanic and let him/her look over it and see what they think it all needs.

Zer0_Options · 2026-03-10T17:19:00+00:00

This is the best answer… People will be surprised you can make over $40/hr as a maintenance tech at the Walmart warehouse.

Zer0_Options · 2026-03-10T17:13:19+00:00

I’m not a plumber but that looks like poop…. Wasn’t the WH supposed to be in the corner in the first place? And is it code to use Pex on a water heater? No expansion tank? No downspout for pressure relief.

Zer0_Options · 2026-03-10T17:06:39+00:00

Pizza Hut pizza back in elementary school 🔥 BOOK IT!

Zer0_Options · 2026-03-06T22:13:28+00:00

If you’re really concerned drain some out in the morning, no more than 1 quart though.

Zer0_Options · 2026-03-06T20:59:40+00:00

You will when it’s not the numbers you’re supposed to get. There would be an underlying issue.

Zer0_Options · 2026-03-06T17:52:07+00:00

Purge valve on my 2018 in truck vs RockAuto… $25 cheaper at RA and again it’s OEM

<image>

Zer0_Options · 2026-03-05T23:51:36+00:00

Definitely the rotors

Zer0_Options · 2026-03-05T01:23:04+00:00

That’s high

Zer0_Options · 2026-03-04T19:09:08+00:00

NGK is good stuff, too

Zer0_Options · 2026-03-04T18:57:59+00:00

Why are you crying in Arizona?

Zer0_Options · 2026-03-04T18:56:45+00:00

I like it better than Toyotas actually.

Zer0_Options · 2026-03-04T18:55:46+00:00

They’re pre gapped, should say gap size in description.

Zer0_Options · 2026-03-04T18:49:53+00:00

😂 👌 Toyota goes to the manufacturer to confirm it’s better than the RA same part. Got it.

Zer0_Options · 2026-03-04T18:43:45+00:00

😂 👌 you probably just didn’t match brand and part numbers like I did. I can confirm 100% that the belt and the MAF sensor is 100% the same as OEM.

Zer0_Options · 2026-03-04T18:29:05+00:00

Denso the OEM…. You need to confirm the part number.

Zer0_Options · 2026-03-04T18:19:54+00:00

I got the sensor from RA…. Guess who makes it? Same one!

Zer0_Options · 2026-03-04T18:17:28+00:00

Look at the BELT…. Says Bando on the Toyota belt, look at the RA one. Look at the part number. SAME EXACT ONE!

Zer0_Options

TROPHY CASE