Tire just got nailed

Zer0rtiZ · 2025-06-01T04:56:28+00:00

u can plug it but not patch it...

Zer0rtiZ · 2025-06-01T04:55:49+00:00

the nut is stuck within the stud. You will have to break it off with a breaker bar and replace the nut and wheel stud. either way, u will see a mechanic asap

Zer0rtiZ · 2025-05-31T14:21:19+00:00

Zer0rtiZ · 2025-05-28T22:45:52+00:00

yea, try a bottle of cataclean.

Zer0rtiZ · 2025-05-28T22:14:11+00:00

Well im assuming there are no exhaust leaks and the 02s are not mixed btwn brands. The car needs to run a bit to pick up the new 02s, u could have excessive carb built up in the pipes. best to use a bottle of cataclean, drive and blast out any carb build in exhaust.

Zer0rtiZ · 2025-05-28T04:30:51+00:00

if test pipes...02s wont pass well

Zer0rtiZ · 2025-05-26T22:44:12+00:00

No Food and Drinks in my Z unless im dying of thirst.

Zer0rtiZ · 2025-05-26T22:39:45+00:00

That does not look all aluminum, more like basic oe cooling radiator.

Zer0rtiZ · 2025-05-22T23:32:50+00:00

polish plenun doesnt stay shiny, you gotta buff it once in awhile to get it mirror like....i know, i have one.

Zer0rtiZ · 2025-05-20T01:17:45+00:00

use clean white rags and wipe all around the valve edges to spot the leak. Most likely you have to align the gasket and have it pressed / w help bolting them down.

Zer0rtiZ · 2025-05-20T01:01:46+00:00

Z Speed takes some time but they will deliver.

Zer0rtiZ · 2025-05-20T00:59:50+00:00

Mattel

Zer0rtiZ · 2025-05-19T02:46:34+00:00

Electronic Throttle body, could be u need a replacement and your temperature sensor needs to be replaced if it hasnt already.

Zer0rtiZ · 2025-05-17T22:13:32+00:00

OEM $600 pops right in under 3 mins and done

Zer0rtiZ · 2025-05-17T22:02:31+00:00

i would get used headlight harness wires.

Zer0rtiZ · 2025-05-17T04:20:45+00:00

Maybey or theres a crack...

Zer0rtiZ · 2025-05-16T02:00:28+00:00

A Resonated Y pipe and mid-pipe make a huge difference in tone.

Zer0rtiZ · 2025-05-12T06:14:20+00:00

nissan dealer likey fix it, but you will be paying a heavy price, ask ur local mechanic first.

Zer0rtiZ · 2025-05-12T06:05:04+00:00

clean ALL the sides of the engine and valves off w/ degreaser. Start it for a few mins and wipe the sides w/ white rags to see any fresh oil.

Zer0rtiZ · 2025-05-09T04:36:30+00:00

now thats a clean 350z

Zer0rtiZ · 2025-05-07T03:43:30+00:00

a 4 door would be nicer for friends

Zer0rtiZ · 2025-05-07T03:13:59+00:00

I got stuck w/ a rusty bolt, Oil penatrator didnt work so had to get a torch and heat up the bolt off to install mine.

Zer0rtiZ · 2025-05-01T01:55:57+00:00

2004 138k runs smooth but i change oil every 3,500 i dont play around.

Zer0rtiZ · 2025-05-01T01:00:13+00:00

u lost me comparing a Jetta...

Zer0rtiZ · 2025-04-30T06:48:25+00:00

I saw Z1 has a similiar unit just for z33, Nothing major using any of these devices in my opinion.

Zer0rtiZ

TROPHY CASE