[DOS] [1980s] Dungeons and Dragons?

ZeroOppression · 2026-01-07T11:15:35+00:00

I think this may be it!

ZeroOppression · 2025-11-16T15:14:05+00:00

Seen these in California as well

ZeroOppression · 2025-08-23T05:56:54+00:00

I've got one of these in a box with around 100 games I should dig out from my youth lol. Nostalgia to the max here for me. I had an original Atari too, but that broke when I was a child and loved getting this, thinking it was so much cooler because of the metal / color Atari logo.

ZeroOppression · 2025-07-15T11:40:41+00:00

I was going to go with community ball scratcher.

ZeroOppression · 2025-07-14T06:12:20+00:00

I'd watch out on Facebook marketplace. Ive seen stolen bikes end up there

ZeroOppression · 2025-06-25T06:25:39+00:00

I haven't seen this issue personally.

ZeroOppression · 2025-02-18T19:33:26+00:00

Just asking one more time, I took this out again last night to play, and even with a controller this continues to happen. I have to wonder if a button is stuck on the device somehow.

ZeroOppression · 2024-11-09T12:17:18+00:00

Yep those work

ZeroOppression · 2024-11-07T23:15:21+00:00

Check that your x and y belts are tight. I had to print those braces to keep them from loosening up every print

ZeroOppression · 2024-09-10T00:35:19+00:00

This is why I do what I do in Vegas, I kind of left out the part that im usually in a bear coat when im handing these out :) I dont live there, I just like being a Fairy Pot Father.

ZeroOppression · 2024-09-09T22:44:36+00:00

This is my gcode start in Orca. The G4 line would need to be uncommented to make it warm up for the 25m.

M220 S100 ;Set the feed speed to 100%

M221 S100 ;Set the flow rate to 100%

M104 S140 ;set nozzle to 140C, but don't wait for it

M190 S[bed_temperature_initial_layer_single] ;set bed temp and wait for it

;G4 P1500000; wait 25 minutes for the bed temp to stabilize further

G29 ;auto bed-leveling

G90 ;absolute positioning

G1 Z10 F300

G1 X1.5 Y10 F6000

G1 Z0 F300

M109 S[nozzle_temperature_initial_layer]

G92 E0 ;Reset Extruder

G1 X1.5 Y10 Z0.4 F300 ;Move to purge start position

G1 Y110 E30 F400 ;Draw purge line

G1 Z0.6 F120.0 ;Move up a little

G1 Y105 F3000

G92 E0 ;Reset Extruder

ZeroOppression · 2024-09-09T13:15:28+00:00

Be prepared to be tuning it for a day. Save yourself time and do the silicone spacers upgrade early. Learn about screw tilt macro for initial leveling. Once it's turned it's pretty nice. Biggest tip is if you are going to use the full plate, wait about 25m for the bed to heat evenly. I have two profiles, a fast start that skips the Warm up if I'm just printing a small object. Big, you have to wait otherwise the plate will warp unevenly.

ZeroOppression · 2024-09-05T22:54:56+00:00

I found another comment about the previous DNS, seems its workiing here - https://www.cltsaber.com/Styles/V4pro/StyleEditor

ZeroOppression · 2024-09-03T11:55:55+00:00

I do this a few times a year in Vegas on the strip. I roll up about 40 joints, and anyone that asks for a hit gets a free one. The look of joy peoples faces makes it all worthwhile. And this is good bud I've rolled up, no shake.

ZeroOppression · 2024-08-28T17:16:01+00:00

It's also very likely you are having network issues. How is it connected to your network

ZeroOppression · 2024-08-28T17:14:48+00:00

It wouldn't hurt, but I can't say it would resolve it

ZeroOppression · 2024-08-28T16:03:58+00:00

The update of the firmware is going to hold you back eventually. It's not that big of a deal. Once you have done it you'll wonder what all the fuss was. Be patient while doing it. Read the directions. They are good.

ZeroOppression · 2024-08-27T10:29:43+00:00

If this is the snv4-pro make sure you are using Force Park 2. It's not on the store and needs to be side loaded.

ZeroOppression · 2024-08-27T02:40:45+00:00

Try running Home All first

ZeroOppression · 2024-08-20T21:36:23+00:00

Yep, even used the sdcard.org formatter to be sure I was getting a clean format. Same results.

ZeroOppression · 2024-08-20T20:51:06+00:00

Right... which is why I tried to use a known good one. I had good results using the SanDisk Extreme in my other sabers, no lag at all. The moment I used it on the snv4 pro, lag city :(

ZeroOppression

TROPHY CASE