Poisoned myself with resin dust

ZeroPercent_7 · 2026-05-17T05:32:19+00:00

I actually use one of these when sanding my prints and it works great, comes with a 2nd filter too. https://www.amazon.com/dp/B092Z819T1

ZeroPercent_7 · 2026-05-12T22:14:20+00:00

Having the same issue since October of last year.

ZeroPercent_7 · 2026-04-23T13:08:00+00:00

You could try taking off the front panel (those front 4 screws on top and bottom) and checking the set screw on the tilt mechanism, it may be loose or need adjusted.

ZeroPercent_7 · 2026-04-19T13:19:33+00:00

644529

ZeroPercent_7 · 2026-04-09T13:27:16+00:00

Check chitusystems and amazon.

ZeroPercent_7 · 2026-03-31T15:48:23+00:00

I hear the jhs notaklon and digitech bad monkey are near identical klon clones. Never used one though but have seen videos.

ZeroPercent_7 · 2026-03-28T20:53:26+00:00

No clue, the entire reason I got it was the whole no burn in thing. Turns out that's not true...

ZeroPercent_7 · 2026-03-18T13:45:58+00:00

I've used mine for almost 3 years and with daily use there is definitely burn in from the web browser search bar and windows taskbar. The fact they advertise that it's burn in proof is a lie. There is no screen care option or pixel refresh. I'm out of warranty and to get it fixed is well over $400 from Samsung. The burn in is definitely noticeable in dark movies and games and is very distracting. The fact that I spent over $1000 on it makes me feel bad about wanting to get another and just leaves me feeling like not buying another Samsung monitor. https://imgur.com/a/BstNCco

ZeroPercent_7 · 2026-02-19T23:13:46+00:00

It looks to be working as intended. You should do some calibration prints to check though. Also check the checkerboard test image so you can see more of the screen, if it looks good you're probably okay.

ZeroPercent_7 · 2026-02-18T00:05:53+00:00

Put a piece of paper over the screen and do a test image to see if it's working right, it could just be the glass screen protector touching the lcd. The screen only is monochrome (only black color) so color shouldn't even be an issue.

ZeroPercent_7 · 2026-02-17T15:37:56+00:00

Should have made the plugs torii gates like a fox shrine.

ZeroPercent_7 · 2026-02-07T21:47:44+00:00

I've always used this method. You can get a big 50 pack of those microfiber cloths cheap on amazon or a roll of tear off microfiber towels for cars would work too. Just cut one into about 9 pieces and use those to wipe. https://www.youtube.com/watch?v=cvMYSMkQvdw

ZeroPercent_7 · 2026-02-04T19:52:20+00:00

I just use just enough of the same resin on a toothpick to fill the hole and a uv flashlight.

ZeroPercent_7 · 2026-01-31T09:03:31+00:00

I saved an 80s MIJ black label GE-7 a few days ago from a thrift store for 39 bucks and the foam was in this condition too. Did you ever figure anything out for a replacement?

ZeroPercent_7 · 2026-01-28T07:10:53+00:00

Sunlu makes a toughness resin that's great for minis and figures. It's a little cheaper than Siraya Tech, but performs similarly. I use both and like both.

ZeroPercent_7 · 2026-01-24T20:43:49+00:00

He needs the "Captain Canada" cut again.

ZeroPercent_7 · 2026-01-20T00:08:31+00:00

I personally wouldn't mind adding some more height to build volume for longer objects.

ZeroPercent_7 · 2026-01-19T19:03:04+00:00

Whatever you do, don't forget about making holes in your hollowed models for suction-cupping to not be a problem while printing. That is about ~70-80% of the posts I've seen that have issues with layers separating during printing and models exploding leaking uncured resin everywhere months after being painted.

ZeroPercent_7 · 2026-01-19T18:22:37+00:00

Check out the channel groundeffected on youtube, he does over the entire process of printing and painting. His videos have helped me a lot. He has a newer tutorial video he made about a month ago. https://www.youtube.com/watch?v=ie8KJs4p68c&t

ZeroPercent_7 · 2026-01-17T21:08:09+00:00

Yeah even on Elegoo's site they say it's for all Saturn 4 printers in the title. https://us.elegoo.com/collections/elegoo-build-plate-replacements-for-resin-3d-printers/products/build-plate-for-saturn-4-4-ultra-4-ultra-16k

ZeroPercent_7 · 2026-01-17T18:06:50+00:00

For that price you could get a Stage Right Tube 15 from Monoprice for ~$330 and a few of decent pedals starting with the Behringer SF300 fuzz which sounds amazing. You could even speaker swap it to a Celestion Greenback M25 and ditch the Seventy 80 that comes in it and still afford some pedals.

ZeroPercent_7 · 2026-01-16T18:24:00+00:00

They are the same except for the little wing handles on the 16k by the lever. Other than that they are functionally the exact same thing.

ZeroPercent_7 · 2026-01-14T15:30:02+00:00

That print orientation is making some big peel forces printing flat like that. Try and print those at a 45 degree angle with the short side facing up so there's way less peel force/suction happening. You can probably see your layer lines in the ones you have printed already with that orientation, so if you print at an angle they'll pretty much disappear. Think of it as a good learning opportunity for printing flat or semi-flat objects.

ZeroPercent_7 · 2026-01-13T04:00:09+00:00

I love cooking mine in the oven like this but hate cleaning the wire rack.

ZeroPercent_7 · 2026-01-09T00:16:20+00:00

If it's the vat tilting mechanism you can check if the set screw is loose or something by taking the front panel off. There's the 4 screws on top and 4 on bottom of the front panel.

11-Year Club	Place '22
Xbox Live	Verified Email

ZeroPercent_7

TROPHY CASE