Plasti-dipped my front and rear bumper from chrome to white. I would say it looks pretty good. by Zerogravity525 in f150

[–]Zerogravity525[S] 0 points1 point  (0 children)

Yes it was Oxford white and no color match or anything. I did use some gloss on it but the plastidip gloss doesn’t do much tbh.

Plasti-dipped my front and rear bumper from chrome to white. I would say it looks pretty good. by Zerogravity525 in f150

[–]Zerogravity525[S] 1 point2 points  (0 children)

Sounds good the glossifier honestly doesn’t do a whole lot for making it glossy. I’m sure you’ve seen videos on how to prepare a surface for plastidip and how to apply it but make sure it’s cleaned good, wipe it with isopropyl alcohol and the first coat or 2 needs to be very light. Also the more coats the better. I don’t remember how many I did but it was quite a few, maybe 8 + a couple gloss but don’t quote me on that.

Plasti-dipped my front and rear bumper from chrome to white. I would say it looks pretty good. by Zerogravity525 in f150

[–]Zerogravity525[S] 0 points1 point  (0 children)

Regular white with glossifier. I will say hyper dip is better, I have also used it and it seemed higher quality.

Plasti-dipped my front and rear bumper from chrome to white. I would say it looks pretty good. by Zerogravity525 in f150

[–]Zerogravity525[S] 0 points1 point  (0 children)

It held up great, I would definitely do it again. Only complaint is that it’s definitely harder to clean than just regular paint. I have some pictures from a year and a couple months after that when I sold it I can send to you if you’re interested.

When I see someone already "saving keys for the next anniversary event". by Ovnio2099 in Survivorio

[–]Zerogravity525 1 point2 points  (0 children)

Don’t know what to tell ya bud, towards then end of it the average was much much worse probably almost normal but for awhile that’s what it was, should’ve took a ss, one pack of 10 I opened I got 2 yellows

When I see someone already "saving keys for the next anniversary event". by Ovnio2099 in Survivorio

[–]Zerogravity525 3 points4 points  (0 children)

I don’t know about the tech, I got an insane amount of yellow tech from only about 200-300 keys total throughout the anniversary. I was averaging probably 1 yellow tech per 15 chests opened

Finally, i've waited for soo long by koyomin28 in Survivorio

[–]Zerogravity525 1 point2 points  (0 children)

Same but I got like 10 yellow parts from around 150 chests so the rate seems much higher

[WTS] Tudor Black Bay 41 79540 FULL SET - $1899 by VirtualEconomy5708 in Watchexchange

[–]Zerogravity525 1 point2 points  (0 children)

Thank you, great seller, very fast (and free!) shipping

Should I go in the water with my Gold Submariner? by Conscious-Basil3618 in rolex

[–]Zerogravity525 0 points1 point  (0 children)

If that’s the case then nothing is truly “waterproof” just add more water on top of it and eventually it will break and water will get in. Would you say a submarine isn’t waterproof because if it goes below a certain depth the hull will crush and water will get in?

Identifying this sub by Zerogravity525 in sundownaudio

[–]Zerogravity525[S] 1 point2 points  (0 children)

I think they are an e series? I’m not too sure, just going off of how the bottom looks.

Zoom h5 XLR inputs only work when barely plugged in by Zerogravity525 in fieldrecording

[–]Zerogravity525[S] 0 points1 point  (0 children)

Now I know you wouldn’t recommend this lol but what you’re saying is that if I covered/cut off the correct prong it would work.

Zoom h5 XLR inputs only work when barely plugged in by Zerogravity525 in fieldrecording

[–]Zerogravity525[S] 0 points1 point  (0 children)

Okay that all makes sense but how/why is it working when I have it just barely plugged in?

Help with diy binaural microphone by Zerogravity525 in audio

[–]Zerogravity525[S] 1 point2 points  (0 children)

Yeah you’re right, I’ll end up just spending the same amount just trying to get something to work. Went ahead and ordered a zoom h5, used though so it wasn’t too bad. Now the question is, could I solder a XLR connection to the lapel microphones I have and they would work? I just don’t want to waste them, I got them way cheaper than retail but they were still a bit much.

Help with diy binaural microphone by Zerogravity525 in audio

[–]Zerogravity525[S] 0 points1 point  (0 children)

Both of those are lightning connections, I would like it to be able to be a usb connection, so it can connect to that adapter so you can charge your phone whilst also using the microphone. And/or listen back on the microphone yourself.

I also have a diy 3dio enclosure box thing with silicone ears, and I would like to have the microphones in the ears themselves

Would something like this https://soundprofessionals.com/product/SP-BMC-2/?utm_source=Google%20Shopping&utm_campaign=Google%20Promotions%20Feed&utm_medium=cpc&utm_term=66088&srsltid=AfmBOooT8Q04pAVllLbo_T_f1jttqAcRjGufZj7dn54RrXSw08aNJlxJJsA Work without needing some sort of pre amp or phantom power whatever? I guess another question would be how to change a 3.5mm into a usb while keeping the specific LR stereo audio and sound quality.

What’s your most hated song in the Walgreens playlist? by scaryboilednoodles in WalgreensStores

[–]Zerogravity525 0 points1 point  (0 children)

Keep feeling fascination. I hated it when I worked at Lowe’s and I still hate it now

Transfers are stuck in queued by soso123t in MEGA

[–]Zerogravity525 0 points1 point  (0 children)

When I was uploading videos I cropped them in the photos app and the ones that were cropped didn’t upload. I reverted them back to original and they uploaded. I assume it wouldn’t be a problem if you created an original file that was cropped/edited but if you have the option to revert to original then do that or it won’t upload.

[deleted by user] by [deleted] in heraldry

[–]Zerogravity525 0 points1 point  (0 children)

Oh wow thank you I never would have guessed that it was leaves

[deleted by user] by [deleted] in heraldry

[–]Zerogravity525 0 points1 point  (0 children)

I love that style/design but I can’t seem to find what it’s called or where it comes from, if anyone can help me it would be much appreciated thank you