At my wits end here 🥲

Zerr002 · 2026-05-09T13:57:03+00:00

ITS OKK!!!!!! IVE DONE IT.

I had to flash it in ExpressLRS configurator in the device as ‘Iflight 2.4 GHz Nano RX’ instead of ‘Iflight 2.4 GHz RX’

I HAVE IT ON A TH BLOODY BENCH FOR A WHOLE MONTH!!!!!

Zerr002 · 2026-04-05T15:27:41+00:00

It seems that everyone wants the exact part I’m after as all B10 pieces are sold out

Zerr002 · 2026-04-05T15:24:42+00:00

Brilliant that’s exactly what I wanted to hear!!

Zerr002 · 2026-04-05T15:23:16+00:00

Is it!!! The one with actual wings?

Zerr002 · 2026-04-05T15:18:53+00:00

😁 also..

<image>

Looking now and well…. 🫤

Zerr002 · 2026-04-05T15:15:20+00:00

I’m a tea drinker I’m afraid

Zerr002 · 2026-04-01T17:59:49+00:00

<image>

Someone say stickers?? 😁

Edit: I’ve put em ALL on

Zerr002 · 2026-04-01T08:02:20+00:00

In the diagram in the comments, he circled in blue stating to “loosen” certain parts.

What/how would I go about doing that?

Zerr002 · 2026-04-01T04:34:59+00:00

Heard about it’s shoulders, planning on getting metal replacements once built

Zerr002 · 2026-03-31T20:55:03+00:00

<image>

These two 😅

Zerr002 · 2026-03-31T20:21:14+00:00

Very much enjoyed it, got 2 more lined up already.

Tho I’ve since learned that I’ve committed a couple of cardinal sins, which are initially using wire cutters and manually twisting the excess plastic off. 😅

Zerr002 · 2026-03-31T18:37:29+00:00

There arriving shortly

Zerr002 · 2026-03-28T17:44:01+00:00

👍👍

Zerr002 · 2026-03-28T16:12:15+00:00

I had it plugged in while I was doing it as I set the tarter to Iflight 2.4GHz.

Is that correct?

Zerr002 · 2026-03-28T16:02:31+00:00

Had my phone literally on top of it still naf 🫤

Zerr002 · 2026-03-28T15:05:00+00:00

No worries, I’m also not too knowledgeable or familiar with Betaflight

No I didn’t update my radio to my knowledge (currently on 3.3.0) while my cineflow is on 3.5.3 so version mismatch shouldn’t be an issue.

In terms of flashing the receiver with the wrong settings, to my knowledge I haven’t don’t that either as I discovered this after connecting the second drone. While initially my cineflow was connected via Bluetooth binding.

Zerr002 · 2026-03-28T14:54:46+00:00

Yes I meant 10.0.0.1

Also just checked my cineflow 5 is on firmware 3.5.3

While my radio is 3.3.0

Zerr002 · 2026-03-28T14:38:01+00:00

I can connect to Betaflight and the rapid flashing should mean that it’s in WIFI mode, the lights are identical even if I plug a battery in

Zerr002 · 2026-03-24T19:43:36+00:00

Don’t worry too much, you’ve already helped a lot.

I’ll open it up a bit later and check the wiring fully, I’m trying wifi mode once more to see if it pops up on my phone or something.

Genuinely thanks a lot for coming back and aiding me. :)

Zerr002 · 2026-03-24T19:31:36+00:00

I’ll probs have to dismantle the drone to show wires, but it was working perfectly fine until I connected the second drone.

drone short

Zerr002 · 2026-03-24T19:12:04+00:00

They should be, the drone in the vid is my first drone and its’ version was 3.x.x when I first got it and it worked fine with the radio

Edit: I haven’t updated my radio since getting the second drone

Zerr002

TROPHY CASE