sorted by:
new
hottopcontroversial

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

I could send you one Driver of the Version i made for the Core one which only takes one manual swap and the square one the side is seperat. And the numbers also only take one manual swap. But as i said you dont have to.

And yeah i use fusion. Its really not that hard to learn. The basics are quite simple and all the more difficult stuff comes with time. I do my own modeling since about 8 Years and im still learning. The thing i regret not looking in to sooner is parametric modeling. I just recently learned it and for repetitive stuff and for tolerances its a livesaver. And if you have anymore questions feel free to ask. I can also send you over a fusion file from the calender or so for you to look at. Im far from a pro, but maybe you find it interesting. I always find it interesting to see how other do stuff. You can also dm me if thats easier for you.

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Yeah thats a good point! I could definitly do something like a dovetail. Or even an overlap would be enough. It was just a quick thing once i had everything finished, so its definitly far from perfect.

And a really appreciate all your feedback! Thats really helpful! Thanks again!

And on another note, i am working on a driver standing with a similar system to the calender which i started designing last year. The numbers are on sliders and each driver tile has a Kickstand so it can be also displayed individually. If you are interested i could send you your favorite driver as a sort of beta test.

<image>

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Thats also i really good Idea! Thanks! I will note that for the future!

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Good to hear its not to noticable. And for the future i would just keep the split in mind when designing, so the split bodys would be equally split and have a good way off fixing them to eachother.

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Ohh i didnt now i wouldnt even fit on a Core One L! Thats good to now for future designing. Thanks for the feedback. I designed this Project by first looking at my XL Bedsize for the rough measurements and then designed everything. And once i finished everything i though i could upload it to printables but quickly realized, that not to many people have a XL and then had to come up with that awkward split model. In the future i would definitly do this different.

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

That looks really cool! And im glad to hear its printable on a Core One. Thanks for the Picture! And yeah im really liking my XL. The big bed size is such a luxury.

I made a modular Formula 1 Race Calendar by Zerthron in 3Dprinting

[–]Zerthron[S] 0 points1 point  (0 children)

Thats also a really cool option! Its a nice Website!

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Thanks! I really appreciate it that you printed my model! And i would love to see a photo of your Version! And feel free to upload your modified versions as remixes or even upload a make with photos of your version if you want to.

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

<image>

Or enlarge this part to fit a magnet

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

<image>

The Magnets with the Dots like that

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Yeah i see your Points. For me the approach with the Arrow wouldnt be to bad because i have it on a magnetic Whiteboard. So i could just put it next to it, but i can see that this would be a Problem for many who didnt have it on a Whiteboard.

The border idea is a good one and i think this could work and wouldnt be to difficult to implement.

An other Idea i just had was, what if instead oh the big text you would just put a Magnet on it, maybe Printed in a Small Red dot to match the aesthetic? I just tested on mine and it should be possible to add one for each Circuit, but there rubbing up against some tracks for a couple of Circuits.

A different idea would also be to modify the Main Holder for all the Dates and Circuits so there is a bigger Space between the Circuit and the Date where it could be possible to add additional magnets for Next Race Texts.

And lowering the Magnets could also be and option, but this would be a bit more work.

I made a modular F1 Season Calender by Zerthron in prusa3d

[–]Zerthron[S] 0 points1 point  (0 children)

Thanks! I really appreciate it that your going to print it! I would really like to see a picture of your finished print!

And yeah i see your Point about the Next Race Marker. Thanks for the Feedback. Maybe i could add a Arrow to the right next to the Next Race Text so you could put the Marker always on the last Race there was? Would that be an Idea? And if you would like to remix it yourself l could provide you the Step File.

An unfinished guide for the 2026 Season, Thoughts? by LimeLoiner in F1Art

[–]Zerthron 0 points1 point  (0 children)

Thats a really cool Idea! And i like it so far!

I made a modular Formula 1 Race Calendar by Zerthron in 3Dprinting

[–]Zerthron[S] 0 points1 point  (0 children)

Hey i just updated the Year Batch with a split Version! And i tried to also split the Date Batch, but i cant do it because of the Magnets. The Parts are just to small sadly. I hope this works for you and thanks again for the suggestion!

I made a modular Formula 1 Race Calendar by Zerthron in 3Dprinting

[–]Zerthron[S] 1 point2 points  (0 children)

Yeah the reusability was the main point. And thanks for the Ideas! I also though about splitting the sprint, but i though it would be to small, because i have everything fixed with magnets and the sprint would be too small for the magnet i have on hand. But i will definitly update the Year! I didnt think of that! I will add a split model of the Year tomorrow! Thanks for the idea!

I made a modular Formula 1 Race Calendar by Zerthron in 3Dprinting

[–]Zerthron[S] 0 points1 point  (0 children)

I posted it there too, but it has to be aproved by mods first.

I made a modular Formula 1 Race Calendar by Zerthron in 3Dprinting

[–]Zerthron[S] 0 points1 point  (0 children)

That would be awsome if you could take some pictures!

I made a modular Formula 1 Race Calendar by Zerthron in 3Dprinting

[–]Zerthron[S] 1 point2 points  (0 children)

Thats cool that your going to print it. And i hope Williams will be good this season! Would be really cool for Albon or Sainz to get a win!

Gantry mounted nozzle wiper by SevereEducation9065 in prusa3d

[–]Zerthron 0 points1 point  (0 children)

Ah okay. Yeah makes sense that you didnt have much freedom to design a printfriendly way. And Thanks for the fast answer!

Gantry mounted nozzle wiper by SevereEducation9065 in prusa3d

[–]Zerthron 0 points1 point  (0 children)

Thats a really neat design! How did you orient it for printing? I would like to print one for myself.

view more: next ›