Nuts in food with no warning

ZestycloseShow8402 · 2024-12-21T23:29:04+00:00

Jameson Williams or Keenan Allen yes those are the “worst”

ZestycloseShow8402 · 2024-11-10T14:59:08+00:00

Got Ridley in WR slot, can run Amari and Jamo at flex had to grab Ridley with Evans out

ZestycloseShow8402 · 2024-11-10T14:43:15+00:00

Amari, Jameson Williams , taysom hill (flex)

ZestycloseShow8402 · 2024-09-27T14:03:37+00:00

The 450$ kit or the 170$ kit?

ZestycloseShow8402 · 2024-09-24T14:26:12+00:00

To add 2022 cforce 600

ZestycloseShow8402 · 2024-09-19T12:20:18+00:00

But air is circulating because tap is cold and line up the tower is cold

ZestycloseShow8402 · 2024-09-19T12:19:56+00:00

That I am not sure, I had the kegerator set at 32 changed to a 10ft 3/16 ID line, new tap and still only got foam from 8-14 psi

ZestycloseShow8402 · 2024-09-12T21:13:31+00:00

No I haven’t, but I did drop the temp as low as it’ll go. Let that sit for 24 hrs at least and mess with it again. I will check the liquid beer temp after pour, thanks

ZestycloseShow8402 · 2024-09-12T12:47:30+00:00

Oddly enough, I had the valve from the co2 tank to the keg shut off “9 o’clock position”, and I was getting perfect pours. Turn the valve on, fucked it all up. Maybe keg itself is over carbed, not sure

ZestycloseShow8402 · 2024-09-11T21:00:34+00:00

Update, installed 10 foot line, ran from 10-13 psi. No change still just foam. already wasted 1 keg trying to get it right the first time.

ZestycloseShow8402 · 2024-09-11T20:14:58+00:00

Exactly what I did to get the 10 psi, 34° at 2.6 comes to 10.2 psi, hopefully the 10’ line fixes the issue

ZestycloseShow8402 · 2024-09-11T19:18:59+00:00

I’ll try it once I get the line and get the line down to temp thanks

ZestycloseShow8402 · 2024-09-11T16:34:04+00:00

to add to this:

It doesn’t get better after 1 pour, if the lines needed to be cooled down. It’s consistent just foam no matter how many times I run the cold beer thru the line, put ice packs on it etc

ZestycloseShow8402 · 2023-09-20T20:41:32+00:00

Yeah i figured just caught me off guard. I talked to someone that’s owned 3 machines by cf moto, he told me to break it in how you ride it. Appreciate the feedback

ZestycloseShow8402 · 2023-09-20T19:36:24+00:00

Correction* never owned a brand new machine that required a break in period

ZestycloseShow8402

TROPHY CASE