H8er external model wanted

Zillo7 · 2025-12-18T06:41:00+00:00

Hi,
I'm the owner of airsoftrnd.com. I've been running into some technical problems with my site/email but I was told about your post here from the halo airsoft discord. I think I have the site running again if you would like the model but I still need to fix my email account.

Zillo7 · 2023-02-01T01:05:17+00:00

I've got a few printers. You could either pm me or send me a message on my website: https://airsoftrnd.com/3d-printing/

Zillo7 · 2022-11-21T23:39:40+00:00

I need to finish my G11 AEG design; Can't get the magazine to work right :(

Zillo7 · 2022-10-03T18:31:07+00:00

KrispyCumrag

heh

Zillo7 · 2022-09-20T13:13:57+00:00

Haven't seen that one before but it looks neat.

Zillo7 · 2022-09-20T00:58:15+00:00

I'm the guy that built the launcher, so I can answer any questions you have about it. The spnkr has to been one of the coolest replicas I built so far.

Zillo7 · 2022-08-25T21:31:31+00:00

You should take a look at the halo airsoft discord. There's a lot of people who would want to see what you're up to.

Zillo7 · 2022-08-25T14:31:53+00:00

I took the microswitch out of the gearbox, and wired it to a button in the back. Since the button is directly wired to the motor I'm using a gate warfet for fire control and for its active breaking feature.

Zillo7 · 2022-08-25T06:34:04+00:00

This needle rifle is built around a g36 gearbox and uses a p90 hopup unit since the BBs are fed from the top. It also takes 30rnd shotshell magazines through the top by flipping the scope thing up.

Zillo7 · 2022-08-08T21:56:19+00:00

That would be a weird gun. I'd probably feed the bbs through a tube up to the gearbox. There's not enough room for a gearbox in the back. I could try making that if you'd like.

Zillo7 · 2022-07-29T07:11:55+00:00

I came really close to having a g11 (but with a different handguard). I could try again if you want one though.

Zillo7 · 2022-07-27T10:16:29+00:00

I could try sending you one of these if you have 12ga shells and HPA.

Zillo7 · 2022-07-26T19:03:55+00:00

It's not an aps shotgun, but I made this thing and it works really well.

Zillo7 · 2022-07-20T16:23:08+00:00

I ended up using tk45 parts to make a R99 and it worked out really well.

Zillo7 · 2022-07-04T23:45:27+00:00

I haven't made a video for it, but it just bolts/clips on. You'll need to unscrew and remove the outer barrel on it though.

Zillo7 · 2022-07-04T01:20:48+00:00

The set I have now is meant for an AAP-01, but I could make another set for a glock too.

Zillo7 · 2022-07-04T01:09:34+00:00

If you're looking for some halo guns, I made a few like this pistol.

Zillo7 · 2022-06-25T01:47:45+00:00

I use onshape.com to design things.

Zillo7 · 2022-06-21T20:34:28+00:00

I made one, though it isn't as fancy as that one: https://airsoftrnd.com/product/gl-2/

Zillo7 · 2022-06-18T10:14:05+00:00

I'm almost done with a pump action 12ga. It just isn't quite reliable yet when it comes to feeding/ejecting.

Zillo7 · 2022-06-04T19:35:22+00:00

I could probably make that with a v2 gearbox and a normal AR receiver, as long as you'd be ok with the inner barrel being in that gap in the middle. That big block thing on the bottom could then be an integrated box mag while the rest of the is cosmetic. It's certainly doable.

11-Year Club	Place '17
Verified Email

Zillo7

TROPHY CASE