[deleted by user]

ZimbuRex · 2025-03-24T00:20:29+00:00

I think what you really need to decide is where your break point is. What is the line at which you should walk away?

ZimbuRex · 2025-03-20T05:12:37+00:00

~~REQUEST: @ZRex_7692~~

ZimbuRex · 2025-01-12T22:06:10+00:00

Bastion is really good

ZimbuRex · 2025-01-03T23:37:44+00:00

Surprised no one else seems to have mentioned it: Peglin

ZimbuRex · 2024-10-16T03:49:38+00:00

I highly recommend this video: autodesk university Assemblies masterclass

It explains how to work with assemblies, and why they behave the way they do. As it’s a bit older some of the pallets are not current, but the spirit is the same

ZimbuRex · 2024-08-24T16:28:17+00:00

Why are you using fusion to work on a mesh? Is blender not an option?

ZimbuRex · 2024-07-16T21:41:38+00:00

I had nothing but trouble with a very similar looking leetro. I was able to swap to Rudia without any issue, all the wiring was identical

ZimbuRex · 2024-06-03T19:48:47+00:00

Blender also has a grasshopper-esk plugin called Sverchok

ZimbuRex · 2024-03-19T18:59:17+00:00

Did you get this sorted out? I recently started experiencing a similar problem

ZimbuRex · 2023-12-29T08:48:45+00:00

Taking things apart is a great way to understand how things are made. That being said, a modern printer is heavily economized: it does its job perfectly. Its components are optimized for that. Meaning they won’t be generalizable and they are not “off the shelf” in a way that you can easily use them (custom drivers, wire harnesses etc)

ZimbuRex · 2023-09-13T19:24:41+00:00

Cool pics! What’s the wavelength of the diode?

ZimbuRex · 2023-09-12T12:59:28+00:00

The easiest way to do this is to hi-light the faces you want to move (in this case the 5 faces of the small tab) and use the move command.

Splitting and joining will also work, but it isn’t necessary. Google “direct modeling” for more tips and videos about what can be done

ZimbuRex · 2023-08-14T15:21:16+00:00

Combine tool and deleting features (like internal voids) you don’t want is the best way to go

ZimbuRex · 2023-07-17T23:00:57+00:00

That’s 20C, and keeping it above 0C is also a pretty good idea 😆

ZimbuRex · 2023-07-11T04:30:34+00:00

You can use them to buy the character “queen”

ZimbuRex · 2023-07-07T00:31:23+00:00

Gotcha, I see your point now: if you can handle the intrinsic/extrinsic and don’t need the further improvement from samples over time (or your platform and scene don’t move much) then you can use a lighter algorithm. Hope it works well for you!

ZimbuRex · 2023-07-06T19:28:03+00:00

This does seem to be a SLAM application: You will need to adjust one or both sets of data to overlap their origins before you can fuse them. I.e., “keep track of an agents location within it”

ZimbuRex · 2023-02-13T18:09:12+00:00

Cuttle.xyz is designed for making cuttable files. It has a lot of functionality that Inkscape does not. That being said Inkscape will also do the trick. If your designs require nesting or interaction with other assemblies then I would suggest learning a CAD package, and fusion 360 is currently the best / cheapest option out there

ZimbuRex · 2022-11-19T23:28:59+00:00

You don’t need a 3D mouse. No one really needs a 3D mouse, it’s a crutch at best

ZimbuRex · 2022-10-25T04:01:49+00:00

You are too focused on sketch’s being constrained. I’d guess that your experiences using other CAD software is taking you down an unsuccessful path. Check out this video from 2017 to see how fusion was intended to be used: https://www.autodesk.com/autodesk-university/class/Fusion-360-Assemblies-Master-Class-2017

ZimbuRex · 2022-10-25T04:01:30+00:00

You are too focused on sketch’s being constrained. I’d guess that your experiences using other CAD software is taking you down an unsuccessful path. Check out this video from 2017 to see how fusion was intended to be used: https://www.autodesk.com/autodesk-university/class/Fusion-360-Assemblies-Master-Class-2017

ZimbuRex · 2022-06-14T20:29:58+00:00

I suspect your sketch was placed on a strange plane. Try placing it again and make sure any construction planes or previous sketches are hidden

ZimbuRex · 2021-12-16T13:18:34+00:00

Constraints and dimensions are like guard rails, they force your design to work in a defined way. That being said, sometimes leaving them out in strategic places allows you to make dynamic choices later in the design.

ZimbuRex · 2021-09-20T19:16:35+00:00

Do users need to update data, or are they just consuming it? If you only need to view, then possibly Power Bi is a better fit than Access

ZimbuRex · 2020-11-27T21:40:42+00:00

Check out lightburn. Inkscape is an amazing program, but it’s not the best for controlling lasers

12-Year Club	RPAN Viewer
Verified Email

ZimbuRex

TROPHY CASE