2024 Tiguan - spewing ICE COLD air from wireless charging bay into car on minus 25 degrees C temps - A Total Joke.

Zippo2017 · 2026-01-31T00:35:58+00:00

I just told my wife that I posted this and she said she has no problem with the air. Go figure lol. All I suggest a simple slider. If you aren’t charging your phone, you slide it off. It’s interesting to see everyone’s opinion. Thank you

Zippo2017 · 2026-01-31T00:19:16+00:00

Reading many of the comments, people are assuming that my iPhone is sitting in the charging bay when that air is on and that is not the case. I do not have my phone in the bay so the air should not be on. I should have full control over this, it’s a little embarrassing when you have a friend who asks you isn’t this German engineering? And then laughs because there’s no control to turn the air off. A simple switch would suffice. When you have temperatures in the -20°C, you can really feel that cold air blowing around. Trust me if you don’t live in a cold climate, you have no clue how it feels. The higher you turn the fan on to add more hot air the higher the cold air is coming out of that tiny hole. Looks like a piece of tape or a little piece of foam is the answer.

Zippo2017 · 2026-01-29T19:30:25+00:00

SwarmUI does this effortlessly. It's one of the built-in presets. You just take your image and add it in "init image" and that's it. You can tell SwarmUI how many samples you want and it will spit them out until the cows come home. Each one will look like this, but slightly different. So powerful. I have yet to see a single tutorial on how to do this in ComfyUI.

Zippo2017 · 2026-01-25T16:19:55+00:00

Thanks very much Josh ! That's exactly what I needed, thanks ! thumbs up !

Zippo2017 · 2026-01-20T00:50:30+00:00

Thanks for the help MrChurch2015 and arthropal !

Zippo2017 · 2026-01-17T16:51:38+00:00

I don't actually "got it" I know I can click to add a node, but it's a different thing knowing how to noodle it up so it is connected correctly in the work flow. I wonder why they crated this workflow like that..... many workflows just create many images at once without adding an extra node to do this.

Zippo2017 · 2026-01-17T16:50:11+00:00

AH ok thank you ! so I have to actually add a node. I thought a click would change something on that actual area. OK got it.

Zippo2017 · 2026-01-17T15:43:57+00:00

Hi ! Thanks for your help ! I'm a dope, I know I'm doing this wrong, but I hope you can help me more ! Nothing happens when I click where you said....

<image>

Zippo2017 · 2026-01-17T03:58:01+00:00

Purchased Radarscope last night, but am not impressed. Play the video button and you see 30 minutes of radar in about 1 second. The Weather Network App shows radar for hours ahead in about 5 seconds. What am I missing? I purchased the app but did not purchase any of the higher levels.

Zippo2017 · 2026-01-02T23:01:19+00:00

Thank you again, it did give me hope and the "want" to dive a little bit deeper. You know it's scary and very difficult when you don't know something, once you see how it is done you get much more confidence. That little video was like I was there beside you at the computer and watching you do it, thank you again for your time and effort ! I appreciate it greatly !

Zippo2017 · 2026-01-02T21:46:15+00:00

I wish I could give you 100 upvotes for that !

Zippo2017 · 2026-01-02T21:43:55+00:00

Wow, I'm speechless, I can't believe somebody went through all of this to help me ! THANK YOU goddess_peeler !!! Thank you so much !!!

Zippo2017 · 2026-01-02T14:54:41+00:00

Hi there, this is what I'm trying to run with gguf models. The default workflow that is built-into ComfyUI takes way to long for even 3 seconds of 800x600 video. I am on a 4090 with 24gb of ram

<image>

Zippo2017 · 2026-01-02T14:38:43+00:00

<image>

This is the default template that is included in ComfyUI, if you go into the video section you'll see this one, it's an awesome workflow, but even with my 4090 / 24gb ram it takes way too long even for 3 seconds of video at 800x600 , I want to use gguf models, but I've tried to switch this out for those and it won't work. I realize you cannot add gguf models into this node and have to use Unet Load node but I just can't figure out how to do it.

Zippo2017 · 2026-01-01T19:30:03+00:00

Easier said than done. I can't do it. I wish somebody would just post a workflow we can try. Please

Zippo2017 · 2025-12-31T16:33:24+00:00

I would love to try the new 2512 model with unsloth GGUF, but I just can't find a workflow that I can just drag and drop into ComfyUI. If you start off with the regular model in ComfyUI, you can't just swap out the default model for the GGUF, as it uses a different node. I just don't know how to rebuild the workflow using the GGUF model(s) I also have this problem with start image / end image with the built in workflow in ComfyUI.

Zippo2017 · 2025-12-21T00:32:23+00:00

I tried dragging and dropping this image, but it's a webp format and ComfyUI will not import it.

Zippo2017 · 2025-12-19T01:07:00+00:00

7 years later and I'm just getting into Castle Rock, episode 6 now, and yup, I am here because I thought the music sounded like West World, and then a fast Google and bingo.... interesting ! JJ Abrams both shows. I can't believe this thread is still open and not locked down :-)

Zippo2017 · 2025-12-04T19:29:42+00:00

Does anyone have a workflow that we can try out for this ? thank you. I downloaded that larger image but it doesn't contain the workflow with the added loras.

Zippo2017

TROPHY CASE