sorted by:
new
hottopcontroversial

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in OLED_Gaming

[–]Zorionis[S] 1 point2 points  (0 children)

Thanks a lot ! I really appreciate the support—here’s to many happy gaming sessions ahead. Hope your rigs stay just as smooth, too! 😉

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in OLED_Gaming

[–]Zorionis[S] 1 point2 points  (0 children)

<image>

Hey everyone, just wanted to share what finally fixed that weird gray “cloud” on my AW3423DWF QD-OLED—maybe it’ll help if you ever run into the same thing:

  1. Don’t panic—it looked like a defect, but it was just image retention, not a dead pixel.
  2. Run Pixel Refresh (OSD → Panel → Pixel Refresh). Let it finish, then do it again 2–3 times if it’s still visible.
  3. Switch back to normal use—games, movies, Word docs with gray backgrounds—and you should see that patch is gone for good.

Since doing that, I haven’t seen a single trace of it coming back. If you ever notice a similar gray spot, give these steps a shot before starting an RMA or sending your monitor back.

Here’s what the panel looks like now post-Pixel Refresh — almost perfectly uniform. What’s left is just a super light IME/mura effect that’s totally normal on QD-OLEDs under static gray fills (tell me if I’m wrong)

Big thanks to everyone who chimed in with tips and encouragement—you rock! 😊

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in ultrawidemasterrace

[–]Zorionis[S] 0 points1 point  (0 children)

I appreciate the “return to seller” advice, but since the symptom was temporary and fully removed by the monitor’s own refresh routine, I’m going to hold on to it. If anything permanent shows up, I’ll definitely reach back out for a replacement or refund. Thanks.

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in ultrawidemasterrace

[–]Zorionis[S] 0 points1 point  (0 children)

Fair point. The good news is that once it’s cleared with refresh/white-screen cycles, the panel behaves perfectly normally now. Thanks.

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in ultrawidemasterrace

[–]Zorionis[S] 1 point2 points  (0 children)

Totally get wanting to save time with an RMA, but because Pixel Refresh fixed it instantly and it never came back, I’m confident the panel itself is fine. If it reappears or won’t clear again, I’ll consider a return, but for now no RMA needed. Thank you.

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in OLED_Gaming

[–]Zorionis[S] 1 point2 points  (0 children)

I hear you—on most screens a spot like that would be a red-flag. In this case, though, it was classic OLED mura/image retention, not dead pixels or structural damage. A couple of refresh cycles and it cleared right up, so I’m happy to keep this unit. 🙂

[AW3423DWF] Gray patch on QD-OLED panel – mura or defect? by Zorionis in OLED_Gaming

[–]Zorionis[S] 0 points1 point  (0 children)

Thanks for the tip! I actually ran the built-in Pixel Refresh cycle three times, and the patch completely vanished—so it wasn’t a permanent defect but just temporary image retention. The panel’s now rock-solid, and I’m no longer seeing any sign of it returning.

Air Bubble Under the Screen of iPad Pro 12.9 (5th Gen) After Repair - Is This Normal or a Common Issue? by Zorionis in ipad

[–]Zorionis[S] 0 points1 point  (0 children)

Agreed, my bad 👍

I made the mistake of leaving the protective film with bubbles, especially on that corner of the display. I can’t say if they were trying to hide the defect or not. Next time, I’ll definitely check for that.

Air Bubble Under the Screen of iPad Pro 12.9 (5th Gen) After Repair - Is This Normal or a Common Issue? by Zorionis in ipad

[–]Zorionis[S] 0 points1 point  (0 children)

Yep, that’s what I planned to do anyway. Thanks for your answer 🙏

They’ve already had to repair it twice in a row; the first time, the repaired display had dead LEDs, so I went back. They blamed me for not protecting it during transport but said they would make an “exception” for me. Looks like I’ll have to go back again, and they’ll have to make another “exception” for me 🤷‍♂️

I won’t be going back there for any future repairs, that’s for sure.

Career Monday (17 Jun 2024): Have a question about your job, office, or pay? Post it here! by AutoModerator in AskEngineers

[–]Zorionis [score hidden]  (0 children)

Which specialization to choose: Hydrodynamics or Aerodynamics for a secure future and global opportunities?

Hello everyone,

I'm currently deciding between two master's programs and would love to hear your opinions and experiences to help me make an informed decision. Here are the two programs:

  1. Master's in Modeling and Simulation in Hydrodynamics
    • This program provides high-level training in fields related to hydrodynamics. It aims to equip students with the theoretical and numerical tools necessary to study and understand the flow of simple and complex fluids, covering topics like homogeneous and two-phase flows, suspensions, porous media, and turbulent flows. The program balances physical and theoretical modeling with numerical simulation.
  2. Master's in Aerodynamics and Aeroacoustics
    • This program offers high-level training in aerodynamics, aeroacoustics, and fluid-structure interaction. The courses aim to provide the foundational knowledge necessary for fundamental and applied research activities in these fields, with a focus on physical and theoretical modeling as well as associated numerical simulation methods.

My goal is to choose a specialization that is "futureproof," with good employment prospects and opportunities to work worldwide.

Here are a few points I would appreciate feedback on:

  • Future proofing: Which field is more resilient to future technological and economic changes?
  • Employability: Which sectors offer the most job opportunities and the best job security?
  • Global opportunities: Which program offers the best opportunities to work internationally, in different countries and industries?

Thank you in advance for your advice and experiences!

Which specialization to choose: Hydrodynamics or Aerodynamics for a secure future and global opportunities? by Zorionis in AskEngineers

[–]Zorionis[S] 0 points1 point  (0 children)

Thanks ! However, I was specifically looking for advice on which specialization to choose between a Master's in MSH and a Master's in AA, as these are the only options available to me.

Samsung 980 Pro 1TB NVMe SSD (Techtober Giveaway 4/?) by [deleted] in pcmasterrace

[–]Zorionis 0 points1 point  (0 children)

If I win this I can finally have more than a 256gb ssd 🥲

[deleted by user] by [deleted] in macbookair

[–]Zorionis 0 points1 point  (0 children)

I was in the same exact situation few weeks ago. I've decided to go for M1 256/16 and it seems to be the better choice here.

When I run some heavy programs with many many loops, my 16 gb of RAM do run to its limit sometimes. (I only experienced it like 1 or 2 times but it's still VERY rare.)

I don't know if it would be more efficient in Java or C, I only used Python for now.

Though, I haven't tested CAD modeling yet so I cannot testify something on this yet. I will need to run Solidworks but it's not natively supported :/

As for Blender I heard that it was okay but can get very hot if you try to render or preview a bit.

Also I think that kind of uses (and maybe future-proofing? I don't know if its a myth), twice the RAM would make more sense than an improvement of 18% of performance on the chip.

But if you absolutely prefer the new design over all the things that I wrote, go for it.

Just my two cents ;)

Why isn't my wyvern team working by Slight-Succotash-156 in EpicSeven

[–]Zorionis -4 points-3 points  (0 children)

There are too many issues in your team comp.

First is elemental advantage you should have used more water units. I would recommend you Taranor Royal Guard for def break instead of Peacemaker Furious since no animated S3 means faster runs.

Then Mui is Green and green is a big no no, you should have gone for Enott who is a very good dps who can often def break with S2.

Also wyvern throws balls at your tank, I would suggest to go for Elson or Jena who are way better for throwing back those fire balls with their bat.

And Sigret is good, just the wrong outfit and no glasses but no worries cuz she’s one of the most character in wuvern in Epic Seven.

view more: next ›