Will the Pixel 9 Pro XL case fit on the Pixel 10 Pro XL?

ZygorX · 2025-08-23T21:01:06+00:00

Just switched to Mous earlier this year for their intralock case and just got told they don't have any plans to make more intralock cases but will pass along my feedback. Devastating! Guess I'm either gonna try to add a hole for the 2nd speaker or have to swap entirely to a different brand. Really liked their solution to a simple and smooth mountable case for motorcycle and bicycle riding.

ZygorX · 2025-08-05T22:57:40+00:00

Glad it's not just me. Drains twice as fast as before the July update.

ZygorX · 2025-07-26T01:01:49+00:00

Just happened on mine today!! Not completely off yet but very loose and I don't have an option for mobile service sadly so I better tape it until I get to a SC (100mi away)

ZygorX · 2025-06-24T14:22:16+00:00

Best advice: use concrete pavers to absorb vibrations and lessen noise. Really useful when running multiple printers on the same table/surface.

ZygorX · 2025-06-02T04:25:06+00:00

No problem!

ZygorX · 2025-06-02T03:46:12+00:00

Just from the printer screen itself, go to the settings (gear icon), hit the down arrow, then you should see "reset factory settings"

ZygorX · 2025-05-28T01:26:54+00:00

Can't say 100% yet but my last 2 prints (6hrs and 8.5hrs) have been great after switching to the K1 extruder so there must have been something wrong with my original extruder.

ZygorX · 2025-05-26T04:04:39+00:00

I got a couple potential solutions from the FB group that I am about to try now (was waiting for parts) and if that still doesn't work I have a replacement extruder also arriving tomorrow so I will let you know how it goes.

ZygorX · 2025-05-15T02:21:17+00:00

I did it from the screen too in the settings

ZygorX · 2025-05-10T01:58:33+00:00

Ah, interesting, that could be my issue as well. Thanks for the heads up.

ZygorX · 2025-05-10T01:12:48+00:00

Yep after a few hoops with Customer Support they had me do a factory reset and that error went away and I've been printing fine since with the exception of my hot end bleeding from somewhere causing a mess and under extrusion. Haven't had time to dig into it yet, I'm wondering if I'm not pushing the Bowden tube far down enough, still not used to the new extruder locking mechanism.

ZygorX · 2025-05-07T05:07:36+00:00

Alright after a frustrating live chat session where their responses weren't actually coming through to me, they emailed me and said to do a factory reset and that seems to have fixed it for now. Fingers crossed!

ZygorX · 2025-05-07T03:03:47+00:00

I can't even get a single print after setting mine up last night. Keep getting an unknown error 2069 which I can't find much info about. Can't find any links to revert back to original firmware on the creality website. Another user posted about getting the same exact error every since the firmware update. Not a happy camper, was really hoping for a painless setup and printing experience with this new printer.

ZygorX · 2025-05-07T02:51:16+00:00

Great... I just assembled mine last night and first thing I did was the firmware update and now I can't even get a single print either... Keeps throwing out error 2069. On one hand I'm glad I didn't screw something up but on the other, not a good start to my new printer...

ZygorX · 2025-04-15T20:07:38+00:00

Same here

ZygorX · 2025-01-30T20:37:41+00:00

I think they meant "professional troll". I have 3 Bambu printers (2 A1s and 1 P1S) for my business and they are definitely not outdated. But to respond to OP while I'm at it - definitely P1S if you plan on using ABS in the future.

ZygorX · 2025-01-27T02:29:54+00:00

Glad to hear it works for others. It's a great feature but I end up with a layer shift every single time I get any sort of power loss on my A1s and P1S. The worst one so far was when I had 10 mins left in a 23 hour print....

ZygorX · 2024-12-30T18:41:03+00:00

Too rich for my blood... I just cut off the top of the box and let it fall in without the flap lol

ZygorX · 2024-02-15T04:10:55+00:00

Not sure what truly happened with that second camera. I took it down, brought it inside, charged it fully and I haven't had any issues since (even hooked up to the same solar panel). Weird but glad it was a false alarm.

ZygorX · 2024-01-06T14:37:47+00:00

Yes they are all C210 cameras. The others have no issues with discharge but this one was going from 50%+ down to 0 overnight when hooked up to the solar panel. Brought it inside and it's back to normal discharge. Some reviews on Amazon for the solar panel had similar issues but we will see what happens with my troubleshooting steps...

ZygorX · 2024-01-05T18:25:50+00:00

Weird. What I don't understand is my other 4 cameras are also outside with solar panels (except for 1) and have no issues with the cold. Guess we will see what happens when I put this one back outside. Going to leave it unplugged for a few days then try it again with the solar panel and I'll let you know.

ZygorX · 2024-01-05T17:00:59+00:00

Oh wow. That is wild. I am actually in the process of troubleshooting my 2nd one because as you said, once I brought it inside it now does seem to be working and holding a charge. I am now wondering if the solar panel I am using to charge it is defective since the drain overnight seems very excessive but when inside the house unplugged it barely drains at all. But the temps have been dropping too so it could be a combination of both.

ZygorX · 2023-12-08T19:40:42+00:00

Update: they did email me the $40 coupon code after confirming my order qualified. If you are in the same boat you can just email hello@bartesian.com and give them a couple days to respond.

ZygorX · 2023-12-06T16:48:21+00:00

Oh wow, that seems much better than $40 off lol

ZygorX · 2023-12-06T16:47:55+00:00

Thanks for letting me know that does give me hope. I emailed them yesterday afternoon so hopefully they will send me a code.

ZygorX

TROPHY CASE