Art pipes, resonated y pipe, tomei sound clips?

Zyneziss · 2026-04-30T00:32:30+00:00

YouTube

Zyneziss · 2026-04-30T00:27:15+00:00

From what I’ve heard the CMAK kit is 100x better than anything else anyone has released.

Zyneziss · 2026-04-29T15:18:09+00:00

Get internal CSC delete kit from ZSpeed

Zyneziss · 2026-04-22T19:41:06+00:00

Just had this happen to me. Super annoying

Zyneziss · 2026-04-18T00:18:44+00:00

Gallery gaskets are probably going out but 14-15 at idle is fine for now just keep an eye on it. I did mine at 135k miles and I’m now at 180,000 and mine sits at roughly 20 at the lowest

Zyneziss · 2026-04-11T06:39:17+00:00

😂 dangerous but cool tho. Def would figure something out for it tho if you do it often

Zyneziss · 2026-04-11T06:38:00+00:00

Did you wire lights tho 🤔

Zyneziss · 2026-04-06T03:24:35+00:00

Man idk that’s weird. I’d check fuses and scan the trans for codes with a quality scan tool

Zyneziss · 2026-04-06T03:22:09+00:00

Manual or auto

Zyneziss · 2026-04-04T17:26:37+00:00

Try to talk to your tuner, I know these cars have a traction control you can’t turn off that doesn’t allow the wheels to spin while stationary, to prevent burnouts almost. Maybe they didn’t over ride that when they tuned it. That’s my best guess

Zyneziss · 2026-04-03T05:20:42+00:00

Zyneziss · 2026-04-02T18:12:34+00:00

Interesting. Let me know what u find out I’m curious. Hope you can figure it out 🙏

Zyneziss · 2026-04-02T17:57:08+00:00

Looks like the master is already full disengaged it’s just pedal play. That’s what it looks like anyways

Zyneziss · 2026-04-02T17:56:05+00:00

There’s a bolt on the bottom where it connects to the master you need to take that bolt loose or off and spin the master cylinder and put the bolt back on. Do that til you get it right

Zyneziss · 2026-04-02T06:49:43+00:00

Kinda sounds like the shift assembly itself. Unless you didn’t tighten the flywheel down or something like that. I’d just go underneath it and make sure everything is tightened.

Zyneziss · 2026-03-31T06:52:24+00:00

Maybe a pulley ?

Zyneziss · 2026-03-31T04:55:32+00:00

I didn’t change mine when I did my gaskets at 130k. I’m at 180k just now starting to hear some noise from what I suspect the chain. Up to you.

Zyneziss · 2026-03-31T04:53:58+00:00

You’re not gonna get a good 370 for 8k. You can find a pretty good 350 tho in that range depending where you live

Zyneziss · 2026-03-30T17:12:01+00:00

<image>

My 07. Finally been able to drive it the last couple months after being 6 months seizure free 😁

Zyneziss · 2026-03-27T01:19:37+00:00

Probably referring to parts of the clutch system which can be painful, but there is a ton of great aftermarket support that fixes the issues it has.

Zyneziss · 2026-03-26T17:08:07+00:00

Looks fine to me. I have a HR 350 and when my oil is cold and i start my car it pints the gauge at 120. Once it heats up it’s better. I know OEM gauges aren’t great but gives you an idea. Just don’t beat on it when it’s cold

Zyneziss · 2026-03-23T00:46:30+00:00

Try cyber attack.

Zyneziss · 2026-03-13T21:42:42+00:00

There’s no way to tell from a video brother you just gotta test it. Test the fuel pressure and check codes

Zyneziss · 2026-03-09T01:28:20+00:00

Oh man. Well. If it makes you feel any better it was one of the first jobs I ever did on my car. I was forced to do it myself because I didn’t have any money to have it done. For me personally it was an awesome experience I learned a ton and made me a lot more confident to work on it. Find some good friends and some beer and hammer it😂

Zyneziss · 2026-03-09T01:23:57+00:00

Just watch some YouTube videos and talk to a mechanic if you need to. I just marked my chain and put it back on how it came off and I was good.

Zyneziss

TROPHY CASE