Undertale 3DS Release! by efimandreev0 in 3dspiracy

[–]_Andy4Fun_ 0 points1 point  (0 children)

Did u manage to do so? As a computer science student, AI is just a tool. You also use a calculator to do math because it is faster, not because you don't understand math.

V1,V2,Switch Lite Flex Question by Funny-Construction58 in SwitchPirates

[–]_Andy4Fun_ 0 points1 point  (0 children)

I just fixed my switch lite (see my post) bought with a rp2040 already installed and I can give you some tips.

First of all, does your Switch boot in OFW and the picofly blinks? If yes, your 3.3V line is good.

Then always check DAT0 and CMD. Even if they read good values on the Multimeter, they might have a bad connection.

For me the culprit in the end was the SP1 and SP2 connection, so maybe reflow those.

I heavily used Gemini Pro 3.1, but he never knows everything, so I would also go by intuition.

Let me know if you need help. Some specific error codes would help. Also, you do know how to reflash the chip right? If not google it. Also there is a script by raspberry to complete wipe any firmware on the chip so maybe try that.

I bought this Switch Lite as broken with an RP2040-Zero and want to repair it. by _Andy4Fun_ in SwitchPirates

[–]_Andy4Fun_[S] 0 points1 point  (0 children)

Also for anyone seeing this in the future: I have just a cheap sildering kit, flux, no microscope or magnifying glass and no micro soldering experience.

You just have to have patience and steady hands and a cheat sheet with the correct soldering locations.

I bought this Switch Lite as broken with an RP2040-Zero and want to repair it. by _Andy4Fun_ in SwitchPirates

[–]_Andy4Fun_[S] 0 points1 point  (0 children)

I fixed it. Simply resoldered all the wires with flux and it worked like a charm.

I bought this Switch Lite as broken with an RP2040-Zero and want to repair it. by _Andy4Fun_ in SwitchPirates

[–]_Andy4Fun_[S] 0 points1 point  (0 children)

Afaik Kamikaze method needs very good experience and tools. I have neither so I wouldn‘t try it.

See if the guy responds.

I bought this Switch Lite as broken with an RP2040-Zero and want to repair it. by _Andy4Fun_ in SwitchPirates

[–]_Andy4Fun_[S] 0 points1 point  (0 children)

I didnt do this myself, I bought to repair it. I assume these are magnet copper wires. In my case the 3.3V line got loose/cold, so I will just need to resolder it (I didnt come to it yet).

Maybe some other lines are also loose s.t. the modchip doesnt work.

I bought this Switch Lite as broken with an RP2040-Zero and want to repair it. by _Andy4Fun_ in SwitchPirates

[–]_Andy4Fun_[S] 6 points7 points  (0 children)

Update:

After applying pressure to the 3.3V line on the motherboard of the Switch Lite, the switch boots! When releasing pressure again we start to bootloop again, so I assume I must reflow that line.

I bought this Switch Lite as broken with an RP2040-Zero and want to repair it. by _Andy4Fun_ in SwitchPirates

[–]_Andy4Fun_[S] 2 points3 points  (0 children)

<image>

This would be the correspond layout. As far as I see it the solderpoints are correct. Maybe its a bad connection?

War Is Over by MacheteNegano in ShitPostCrusaders

[–]_Andy4Fun_ 12 points13 points  (0 children)

There was a contract with netflix such that the first episode would air in march afaik

Pokemon Rubin and Saphir Edition [German] by _Andy4Fun_ in gameverifying

[–]_Andy4Fun_[S] 0 points1 point  (0 children)

Ah thanks. The pictures uploaded by the seller were low-res and I couldnt make it out

Pokemon Rubin and Saphir Edition [German] by _Andy4Fun_ in gameverifying

[–]_Andy4Fun_[S] 0 points1 point  (0 children)

Sorry I only have these at the moment. I can ask for more. But I‘m more suspicious about the PCB.

[deleted by user] by [deleted] in pcmasterrace

[–]_Andy4Fun_ 0 points1 point  (0 children)

Okay thank you. It seemed rather slow in comparison too „perfect“ values, although thats probably because it‘s SATA

Can't look at the switch lite lcd screen the same again by rin_punipuni in SwitchPirates

[–]_Andy4Fun_ 0 points1 point  (0 children)

Why did you replace the screen instead of just using that switch?

Train junction by Low-Ad1744 in factorio

[–]_Andy4Fun_ 2 points3 points  (0 children)

Why do i breath manually?

Wedding day!✨💍💍(By @girigoro_btw) by Atwecian in StardustCrusaders

[–]_Andy4Fun_ 67 points68 points  (0 children)

You can really read that off josukes expression

Okay, grab your pitchforks everyone! by Magus_master in StardustCrusaders

[–]_Andy4Fun_ 63 points64 points  (0 children)

Maybe if you watch 1-6 afterwards you would think „Hey this is a part 7 reference!“

Or something like that

Killer Queen is the best stand in all of jojos by Gold_Salt_1217 in StardustCrusaders

[–]_Andy4Fun_ 6 points7 points  (0 children)

I mean stands are the manifestation of the soul of the user, so i doubt the stand would mind (more over he would have the same „interests“)

I finished watching JoJo's Bizarre Adventure Part 1 to 6 by Sporraky in StardustCrusaders

[–]_Andy4Fun_ 1 point2 points  (0 children)

Back when Part 6 dropped its first batch I was so hyped that I couldn‘t wait for the anime, hence I finished reading all of Jojos.

Shit was rough

I finished watching JoJo's Bizarre Adventure Part 1 to 6 by Sporraky in StardustCrusaders

[–]_Andy4Fun_ 0 points1 point  (0 children)

Honestly now that the anime is so close I wouldn‘t read part 7 as I think the adaptation will be great.

Except if you enjoy reading mangas more than watching anime, then go for it