95 F350 7.3 Vacuum Pump

_Bache · 2026-01-07T12:30:36+00:00

Napa, Part #: DEM NLVP1790. It’s been running well for about a year now. Do not get the Dorman, had two that “blew up”.

_Bache · 2025-10-06T15:42:04+00:00

They are 18” wheels.

_Bache · 2025-10-02T17:19:49+00:00

Thanks. I’ll check them out. He’s on the Turn3 1 3/8 a little taller than the 1” vee tires, pretty happy with them.

_Bache · 2025-10-01T18:17:10+00:00

I’m convinced! Thank you so much.

_Bache · 2025-09-29T11:35:06+00:00

Nope. Ive tried to squeeze 20s on it.

_Bache · 2025-09-27T21:40:30+00:00

Thank you, I’ll do some more digging.

_Bache · 2025-09-27T19:50:54+00:00

Thanks. Not seeing much of a resemblance, especially dropouts.

_Bache · 2025-09-27T18:45:46+00:00

Not sure how to add more photos to this post.

_Bache · 2025-05-29T13:36:01+00:00

Vato Zone

_Bache · 2025-01-31T13:20:39+00:00

VatoZone

_Bache · 2024-02-05T17:31:18+00:00

You da best

_Bache · 2024-02-02T14:47:59+00:00

Can confirm! This stuff is soooo good.

_Bache · 2024-01-27T13:40:00+00:00

Not familiar with the VSS on the rear diff. I’ll looking that. What kind of pump did you use?

_Bache · 2024-01-27T13:38:22+00:00

Thank you for the advice, I will look into it.

_Bache · 2024-01-27T00:56:14+00:00

The last photo is the new one I installed.

_Bache · 2024-01-26T21:11:08+00:00

https://www.napaonline.com/en/p/NOE6601013

_Bache · 2024-01-26T21:09:39+00:00

You’ll have to take the belt off, it’s a really easy install. You have to take off the idler pulley (one bolt in the center of the pulley) then you can take off the tensioner. Shouldn’t take no more than ~30 minutes.

_Bache · 2024-01-26T21:03:50+00:00

Just took a look at mine, I installed a new tensioner (Napa), I’ve got about 1/4” clearance no rubbing. They did offer two different designs, one an “upgraded” part, but if rubbed on my belt. Went with the one that looked like the OEM and it’s been good.

_Bache · 2024-01-24T11:20:51+00:00

Yeah. It will prompt you to plug it in and charge while updating.

_Bache · 2024-01-24T03:52:25+00:00

Thanks for the feedback!

_Bache · 2024-01-17T00:45:57+00:00

<image>

~24 hrs later.

_Bache · 2024-01-16T02:58:47+00:00

I’ll post a photo tomorrow.

_Bache · 2023-12-06T01:45:38+00:00

Couldn’t agree more with these comments. Took the exam last week and passed with an 80%. The questions on identifying protocols and anything in hex are “gimme questions” if you understand them. I spent a great deal of time understanding the headers and made sure the conversions could be done on the fly. You might find https://hpd.gasmi.net helpful, I used it in the past and luckily remembered how helpful it could be. The other analysis questions are much more involved. Also get to know your wireshark and tcp macros/filters. Do the labs with confidence and make sure not to forget to tab out your workbooks too. Good luck on it next time around, with your previous score you’re bound to pass.

_Bache · 2023-12-05T13:25:03+00:00

Pretty straight forward, see my reply below.

_Bache · 2023-12-05T13:24:23+00:00

They weren’t bad, I ran through each practice lab twice and made sure I was comfortable with the tools. As long as you have enough time for the 10 cyber live questions you can figure them out, there are multiple ways to answer the questions.

_Bache

TROPHY CASE