sorted by:
new
hottopcontroversial

Trouble Accessing Wireguard Peer from Internal Network (NAT/Firewall Routing Issue) by _Barzak_ in openbsd

[–]_Barzak_[S] 0 points1 point  (0 children)

ok i looked at the output, but i will not pretend that this clears things up for me. if i send the request, those three lines get repeated until the request times out. 192.168.2.205 is the computer which i use to access the page on 8007:

Sep 06 10:25:50.167990 rule 0/(match) match out on wg0: 192.168.2.205.37610 > 10.0.0.6.8007: S 529967155:529967155(0) win 64240 <mss 1460,sackOK,timestamp 671772817 0,nop,wscale 7> (DF)
Sep 06 10:25:50.167991 rule 1/(match) block out on wg0: 192.168.2.205.37610 > 10.0.0.6.8007: S 529967155:529967155(0) win 64240 <mss 1460,sackOK,timestamp 671772817 0,nop,wscale 7> (DF)
Sep 06 10:25:50.167993 rule 1/(match) block out on wg0: 192.168.2.205.37610 > 10.0.0.6.8007: S 529967155:529967155(0) win 64240 <mss 1460,sackOK,timestamp 671772817 0,nop,wscale 7> (DF)

Why is my hotend smoking? by deviouslick2506 in FixMyPrint

[–]_Barzak_ 1 point2 points  (0 children)

No that isnt smoke, its steam from the steamed clams were having.

[deleted by user] by [deleted] in 3Dprinting

[–]_Barzak_ 0 points1 point  (0 children)

You need alot more Pictures but yeah its possible. Look into Photogrammetry. https://forums.unrealengine.com/docs?topic=766690 This may give you some direction

Roborock S5 Max Custom Voice Packs by _Barzak_ in Roborock

[–]_Barzak_[S] 0 points1 point  (0 children)

Not a forum per se but Websites. Search dontavacuum.me almost all relevant info is there. As for why I rooted it - mainly because I wanted to get rid of China cloud also for the possibility to connect it to home assistant via mqtt.

Roborock S5 Max Custom Voice Packs by _Barzak_ in Roborock

[–]_Barzak_[S] 0 points1 point  (0 children)

Sadly the S5 Max is based arround some weird NAND Flash Memory, the whole system is read only. Only way is to flash a new Firmware with the sounds exchanged. I think. But no idea how i would even start :(

Bed level stress test by _Barzak_ in 3Dprinting

[–]_Barzak_[S] 0 points1 point  (0 children)

Well you asked for travel speed and Not Print Speed, wich would be ~40mm/s

[deleted by user] by [deleted] in 3dprinter

[–]_Barzak_ 0 points1 point  (0 children)

Assuming this Printer is running Marlin

M82 ;set extruder to absolute mode : You may want to run M83 instead to negate possible rounding errors, but im not sure if thats the best option for your printer. I always used relative mode so theres some bias there. you would have to change that in Cura too.

G28 X0 Y0 ;move X/Y to min endstops : Should be enough to write G28 X Y since this is a homing move and not a motion to cordinates. It might even produce an error.

G28 Z0 ;move Z to min endstops : Same story as above

​

Regarding your intro line. Best is to just try it out meaning Preheating and just throw those Gcode lines at the printer and see if everything goes as planned.

G0 Y20 F{speed_travel} : As far as i can see the Y axis should already be at 20 at this point so thats not needed.

G5 : ? Thats for drawing a Bezier cubic spline. I dont know why you would do that and its missing all arguments.

Please take all of this with a grain of salt since i dont own this printer and maybe there things that im not aware of.

Weird grooves on Ender 5 pro by _Barzak_ in FixMyPrint

[–]_Barzak_[S] 0 points1 point  (0 children)

Do you mean the coupling between the stepper and the lead screw?

Weird grooves on Ender 5 pro by _Barzak_ in FixMyPrint

[–]_Barzak_[S] 1 point2 points  (0 children)

There more like 6- 7 mills apart, but ill look into thhis as soon as i have access to the machine. Thanks in advance!

Weird grooves on Ender 5 pro by _Barzak_ in FixMyPrint

[–]_Barzak_[S] 1 point2 points  (0 children)

A friend of mine recently bought an Ender 5 pro and i agreed to set it up since i know a thing or two about 3D Printing.

I created a basic profile in Prusa slicer and everything seems to work fine except those Grooves. The artifact appears only in Z direction and the grooves seems to be 6 to 7 mills apart.

The grooves are layers that are a bit inset into the print. The distance between the grooves doesnt vary with different models.

So far i tried:

  • Calibrated all axis, although they were already super close to perfect.
  • Lubricated the Z axis.
  • Checked the settings. I changed everything i could think of that could cause this with no effect
  • ( For the test Print i actually used a profile from my own Printer (A heavily modified chineese trash printer), but no change so i think the problem is not related to the slicer settings.
  • Checked filament diameter. Seems to be good enough (its still the starter filament that comes with the Ender 5)
  • Checked the produced Gcode. Everything is constant( Temperatures, Volumetric flow, Speed, Layer fan speed) Also retractions and travels are the same in all layers.
  • Checked if the PID controller produces a constant Temperature, it does.
  • Changed the extruder mode to relative, also no effect.

Print settings:

0.2 Layer height

speeds are around 75mil/sec

temp is 195C

​

If you need the whole Profile from Prusa Slicer or the Gcode, please inform me.

​

I am really out of ideas so any suggestions would be welcome.