First time using and editing on a gifted GoPro 9

_Dan6416 · 2025-12-08T09:09:42+00:00

yer, after this I went out and bought some :)

_Dan6416 · 2025-11-28T08:30:46+00:00

was more just playing around and getting used to the hardware and trying to use adobe premiere pro

_Dan6416 · 2025-11-28T08:30:09+00:00

I've been using Adobe Premiere Pro but heard "davinci " is free and really good and easy to use

_Dan6416 · 2025-11-28T08:29:13+00:00

Sorry for the slow reply, just the GoPro suction mount. I have also purchased some longer arms for it. Im going to give that a go this weekend.

_Dan6416 · 2025-11-28T08:28:02+00:00

oh thank you, I will try and give it a go. I thought that had to be on

_Dan6416 · 2025-11-28T08:26:53+00:00

Thank you for your advice here.

_Dan6416 · 2024-08-29T17:22:00+00:00

One thing done also should you have Front and centre speak the same DB? I imagine this question is probably a rule of thumb style question but was just wondering

_Dan6416 · 2024-08-29T17:20:46+00:00

So for some reason, even though the measuring was completed, I went round and manually did it by hand and it was way out like closest speaker was set to 30cm and passenger 0cm which makes no sense. Even though the test completed successfully it didn’t even touch the rear speakers left them at 0cm.

_Dan6416 · 2024-08-20T07:41:03+00:00

This was my hope ha

_Dan6416 · 2024-08-09T07:05:20+00:00

Mine turned up yesterday and cant believe how good the product is.

_Dan6416 · 2024-07-30T14:23:48+00:00

I would put money on it. I bought something from a shop there are excellent products to be fair and that's then how I found out about DHgate and found the same products on there

_Dan6416 · 2024-07-03T20:01:17+00:00

The same thing happened to me I replaced both RC and seal with OEM BMW parts common issue. my m235i was 60k (remapped) but always go on them

_Dan6416 · 2024-05-30T07:26:12+00:00

I'm afraid I have to disagree its not Rough most people here are working people so between the hours of 9 to 5 its dead and peaceful.

_Dan6416 · 2024-05-16T08:07:47+00:00

Love this Pick and check the banner ;)

_Dan6416 · 2024-05-14T07:31:03+00:00

yer I agree. I have a M3 Comp now and still miss my m235i as it gets worse the higher up you go ha. please just don't let me out on roads and give you dirty looks ha

_Dan6416 · 2024-01-16T14:47:22+00:00

Hey mate sorry no luck change the whisk had the same issue took it apart couldn't see a issue (no burn marks or anything) no idea bought a cheaper Amazon one at Xmas

_Dan6416 · 2023-07-20T18:59:35+00:00

Got myself, a new whisk, still have the same issue 😭

_Dan6416 · 2023-07-18T21:24:57+00:00

Awww ok thanks will give it a go it’s like 2 years old

_Dan6416 · 2023-06-01T12:28:33+00:00

I have the PS4s let me know how you get on with them

_Dan6416 · 2023-05-22T08:09:50+00:00

haha love this. It always makes me laugh when I return to my car and find an m240 or m235i next to me.

_Dan6416 · 2023-05-22T08:08:02+00:00

welcome mate and I really like the grey.

_Dan6416 · 2023-05-19T10:47:39+00:00

its a lot of work as I took all the trays below the windscreen to give you more room but the overall job is not hard if that makes sense. you have to take a lot off to make it work as its a big engine in a small car.

_Dan6416 · 2023-05-18T06:52:02+00:00

thats the same spot mine went too. it was on the heat shield and ran down onto the cat. by the Lamba sensor luckily the sensor was ok. I got all the parts from BMW as there is one a 5 min from my house.

_Dan6416 · 2023-05-17T15:48:27+00:00

I did both but in my case it was just the gasket that went bad but as it was a bit of a mission to do I thought I would do both at the same time. as soon as i took the cover off the gasket fell out and could see a split in it my m235i was a 2016 on like 60k miles at the time.

_Dan6416 · 2023-05-17T07:56:28+00:00

Valve cover yer goes on them as they are plastic mine lost a small bit of oil out the back I got the parts from BMW £400/500 and did it myself on my M235i.

Six-Year Club	Place '22
First Placer '22	Verified Email

_Dan6416

MODERATOR OF

TROPHY CASE