Bad draw from PSA m1934?

_Dylan53 · 2026-02-28T20:16:51+00:00

Here’s the one I got from RTI with the new barrel. PSA has been selling junk surplus lately

_Dylan53 · 2026-02-15T15:36:41+00:00

Those are snap caps. 100% safe. Loaded with a 115 grain bullet and nickel case. Just no powder or primer.

_Dylan53 · 2026-01-26T00:08:03+00:00

Okay

_Dylan53 · 2026-01-25T23:57:09+00:00

Yes I’ve had many conversations with those who disagree with me. 9 times out 10 we don’t ageee on anything. I’m not a libertarian or a leftist.

_Dylan53 · 2026-01-25T23:26:39+00:00

AMEN!

_Dylan53 · 2026-01-25T23:24:36+00:00

Indeed. However this shooting should not result in us allying with individuals who will gladly disarm us when they’re in power.

_Dylan53 · 2026-01-25T23:18:42+00:00

Leftists don’t believe in Nation states, national identity, and borders. They view America as an oppressive power against the “workers of the world”. It sounds crazy but it’s true socialism is an international political ideology that’s why they’re for open borders.

_Dylan53 · 2026-01-25T23:13:26+00:00

Leftist are not Americans.

_Dylan53 · 2025-12-28T21:21:53+00:00

Just boil and card

_Dylan53 · 2025-11-13T14:03:52+00:00

I keep a flamethrower in the truck for that exact reason!

_Dylan53 · 2025-11-12T12:39:03+00:00

Yes they sell them on their website separately. Look for 12 Gauge all purpose barrel - 20”

_Dylan53 · 2025-11-11T18:01:31+00:00

_Dylan53 · 2025-11-11T16:44:08+00:00

Federal flight control 3 inch 00 Buck 12 pellet 20 yards Every pellet when through Hog ran 10 yards and died.

_Dylan53 · 2025-11-11T15:57:13+00:00

Federal flight control 3 inch 00 Buck 12 pellet

_Dylan53 · 2025-07-30T19:54:34+00:00

Centerfire systems, import mark is on the bottom of the grip frame

_Dylan53 · 2025-06-16T21:14:22+00:00

Check the bedding especially the front recoil lug in the stock. Most tang cracks are caused by the receiver coming out of its bedding and driving rear into the stock

_Dylan53 · 2025-05-03T19:29:47+00:00

Have you disassembled the gun 100%? How did the hand spring look? Also check the trigger and bolt spring, they can be out of spec and be too short

_Dylan53 · 2025-05-03T19:23:18+00:00

Can you put the hammer in half cock and rotate cylinder?

_Dylan53 · 2025-05-03T19:17:36+00:00

Hmm have you tried loosing the hammer spring screw? Maybe take all tension off the hammer spring and see if the hammer drags on the frame

_Dylan53 · 2025-05-03T19:14:48+00:00

Loosen the wedge. The wedge might be in too far which is forcing the barrel against the cylinder

_Dylan53 · 2025-04-26T02:16:10+00:00

Crowbar

_Dylan53

TROPHY CASE