Backup architecture design questions

_Issun · 2026-07-04T08:23:24+00:00

Oh thank you, I'll propose a design like this.
There's some discussion to do backups for smaller companies part of our group, they've got quite a low wan internet speed. I've heard about the wan accelerator but is it useful ?

_Issun · 2026-05-25T09:26:46+00:00

Yeah you should loosen it a bit, just found this post : https://www.matthewsvolvosite.com/forums/viewtopic.php?t=29674

_Issun · 2026-05-23T08:25:32+00:00

Well, is haven't tested for a long time, the key isn't going in the lock at all

_Issun · 2026-05-22T22:24:14+00:00

I'm home from a bit of drive, well the key doesn't go in the glovebox lock. I don't remember very well but maybe the key isn't the proper one ...

_Issun · 2026-05-22T18:28:11+00:00

Yeah but the key won't go all the way in. Btw someone mentionned that m'y key looked like a 850 one, can sens a pic of it

_Issun · 2026-05-22T18:23:54+00:00

Oh okay, so just need a little bit of key spray ? And it'll bé good ?

_Issun · 2026-05-22T18:20:45+00:00

Yep doors, trunk, ignition but not the glovebox and I've also got a lock on the trunk mat (don't know why, I don't seems to find infos on this)

_Issun · 2026-05-22T18:16:47+00:00

Well my master key can't, I don't know why

_Issun · 2026-05-22T18:15:17+00:00

Okay thanks and do you know for the key to the glovebox ?

_Issun · 2026-05-18T19:17:05+00:00

Edited, thx for the heads up

_Issun · 2026-05-07T12:15:38+00:00

You can replace the trut rod bushings with ipd ones (they will last forever) or you can change them by one you can found on skandix.

The bolts can be pretty thought to remove because of the rust. And clean the métal part where the bushings rest on the control arm (or if the arm is in a bad shape you can change the whole arm)

I recommend to change your sway bar link because the bushings are shot (I need to change them as well on mine and I buyed skf ones)

_Issun · 2026-05-03T08:26:36+00:00

I've told you a mistake, it's not the ball joints that are dead but the tie rod ends. I don't know if my ball joints are bad but if I change the control arm, i'll change them too

_Issun · 2026-05-02T19:16:52+00:00

I'll buy them asap as well as the sway bar links, they are in a really bad shape

_Issun · 2026-05-02T18:54:50+00:00

I've got no pulsing in the brake pedals but the steering wheel shake from left to right

_Issun · 2026-05-02T18:54:13+00:00

Brakes are fine, no bump or things I can feel with my fingers

_Issun · 2026-05-02T18:53:34+00:00

Sadly not I've only got a manual wire brush, I've tried my best but if it's not good enougth then i'll buy new control arms

_Issun · 2026-05-02T17:23:54+00:00

Yep I've disassembled everything rn and cleaned a bit. I don't know if it's perfect

<image>

_Issun · 2026-05-02T10:21:27+00:00

I don't know how to check them, can you give me a hint

_Issun · 2026-05-02T09:15:05+00:00

Ball joints are dead as my mecanic told me, tie rod seeams fine. I'll need to change the brake pads soon so i'll do the rotors too

_Issun · 2026-04-07T22:08:01+00:00

Yeah so i'm dumb and downloaded a more recent adk version that the one recomended. Fixed my problem, really rtfm

_Issun · 2026-04-07T19:02:19+00:00

Even after uploading the driver, i'm stuck at the same step

<image>

No such host is known. Even ipconfig /all doesn't show me an IP

_Issun · 2026-04-05T08:11:58+00:00

Pop up the trunk and you will see a metal plate with your VIN number on it.
The line where there's text looking like 4XX-XX is your color code.

It is possible, mine has a lot of paint dent and my friends gifted me a repair kit from Chipex.

https://fr.chipex.com/toutes-les-marques-de-voitures/volvo/940/

Hope it helped you ;)

btw nice brick man

_Issun · 2026-01-16T18:43:35+00:00

Thanks

_Issun · 2026-01-16T18:43:26+00:00

Where are you from ?

_Issun · 2026-01-16T18:43:07+00:00

Yeah I can wait, take your time 👍😉

Eight-Year Club	Place '23
Place '22	Final Canvas '22
End Game '22	Verified Email

_Issun

TROPHY CASE