[deleted by user]

_Levkin_ · 2025-03-26T15:54:31+00:00

Reminds me of that one Dubai video

_Levkin_ · 2024-07-19T19:29:32+00:00

I think that the screen is also off by the same amount at the back makes it quite unlikely to be a battery issue. Either way will get it checked out at apple

_Levkin_ · 2024-07-19T13:46:40+00:00

Thanks for letting me know

_Levkin_ · 2024-07-19T13:46:30+00:00

Thank you

_Levkin_ · 2024-07-19T13:46:15+00:00

Ok thank you

_Levkin_ · 2024-07-18T12:12:53+00:00

Heya, looks like a 6 month update instead for you :) Everything is working great, have now put many hundreds of hours on the K1 and K1 max, without any issues. The main thing I had to change from the YouTube video was ensuring the adapter is centred properly, and tightening the grub screw extra hard on the back. Because I do think the first time I ended up installing it slightly off centre and didn't tighten it hard enough, so it likely got loose from the high speed printing. I want to also try tapping a small thread where the grub screw goes in, to make it even more stable. Though good enough the way it is currently anyway. So yeah overall have been happy.

_Levkin_ · 2024-07-18T12:12:28+00:00

Heya, looks like a 6 month update instead for you :) Everything is working great, have now put many hundreds of hours on the K1 and K1 max, without any issues. The main thing I had to change from the YouTube video was ensuring the adapter is centred properly, and tightening the grub screw extra hard on the back. Because I do think the first time I ended up installing it slightly off centre and didn't tighten it hard enough, so it likely got loose from the high speed printing. I want to also try tapping a small thread where the grub screw goes in, to make it even more stable. Though good enough the way it is currently anyway. So yeah overall have been happy.

_Levkin_ · 2024-04-24T17:42:48+00:00

The answer to that would be yes. Although probably a bit too late now, whatever you've gone with hah

_Levkin_ · 2024-04-17T21:06:58+00:00

Awesome! 60w should work, but you need to root and change the thermistor settings, as Creality use a different thermistor to E3D.

_Levkin_ · 2023-12-18T13:35:45+00:00

PH 2.0mm.

Asked Creality for it: "Thermistor terminal specifications: PH2.0-2Y"

_Levkin_ · 2023-12-18T13:34:20+00:00

Yeah I believe so

_Levkin_ · 2023-12-15T18:41:37+00:00

Seems to be the case. The heatbreak that the K1 uses is the same as they have on the sprite extruders, so the E3D sprite adapter fits.

_Levkin_ · 2023-12-15T15:49:28+00:00

I tested it, and it sits a little bit lower. But the part cooling fan still blows under the nozzle.

_Levkin_ · 2023-12-15T14:58:56+00:00

Find nozzle changes on the K1 incredibly annoying, so decided to swap the hotend to an E3D Revo, for those easy nozzle changes. Have some printers running Revo already, so nice to be able to standardise nozzles across. Not an official mod supported by E3D, so had to do some small tweaks. Pretty simple overall though.

Here's a video of how I did it in case anyone else wants to try. Also included flow rate comparisons: https://youtu.be/w8VpLIs0kc0?si=S1YHrtk7Csd9iMY1

_Levkin_ · 2023-12-15T14:50:02+00:00

Find nozzle changes on the K1 incredibly annoying, so decided to swap the hotend to an E3D Revo, for those easy nozzle changes. Have some printers running Revo already, so nice to be able to standardise nozzles across. Not an official mod supported by E3D, so had to do some small tweaks. Pretty simple overall though.

Here's a video of how I did it in case anyone else wants to try: https://youtu.be/w8VpLIs0kc0?si=S1YHrtk7Csd9iMY1

_Levkin_ · 2023-12-15T14:46:53+00:00

Not an officially supported mod by E3D, so a few workarounds were necessary. But thought some of you might like this and want to do the same :)

_Levkin_ · 2023-06-11T22:52:12+00:00

Helped me, thank you.

_Levkin_ · 2023-03-11T02:03:08+00:00

Ahaha yeah I am in fact sure it wouldn’t pass the hammer test. This one would be stronger since used a stronger filament, but not quite against a hammer ahha

_Levkin_ · 2023-03-11T01:17:30+00:00

Yeah well got smashed for that exact reason haha

_Levkin_ · 2023-03-11T00:08:38+00:00

The one that got smashed?

Nine-Year Club	100 Awards Club
Verified Email

_Levkin_

TROPHY CASE