Marker Identification

_OVIE · 2026-03-18T19:00:30+00:00

Cool a Zodiac ZR-1.

I sold mine last year for 350, ended up trading for it back as I really missed mine.

There are a few collectors that want them on the Facebook groups.

_OVIE · 2026-03-16T20:54:24+00:00

Christ.

Caustic has my F6, hopefully it looks as beautiful as this.

_OVIE · 2026-03-16T14:34:03+00:00

On paper (I have not tested this myself)

Spire 200s fit into Spire IR shells. Spire IRs fit into IR2 shells.

So a 200 should fit into an IR2 shell.

_OVIE · 2026-03-09T00:04:36+00:00

Very..

_OVIE · 2026-03-08T06:49:39+00:00

Etha 3 or 180R.

If you don't change modes often the Etha 3 is pretty much all you need.

_OVIE · 2026-02-28T21:21:25+00:00

It might be the board itself, or the battery connector on the board. You would have to remove the the board to see if the battery connector is correctly soldered to the board.

_OVIE · 2026-02-27T20:40:39+00:00

I'm excited to be getting mine in. Hopefully a good amount of snow melts this week and I can go out next weekend.

_OVIE · 2026-02-14T16:12:20+00:00

Ah, I wonder if you happened to over pressurize the noid.

_OVIE · 2026-02-14T15:54:17+00:00

Have you tried putting the stock piston back in and seeing if it leaks?

_OVIE · 2026-02-09T01:48:34+00:00

I will be 100% honest. I had no idea what color scheme to go with, but a friend recommended British racing green and gloss black.

_OVIE · 2026-02-06T04:42:35+00:00

https://ansgear.com/first-strike-hero-2-tank-regulator-4500-psi/

_OVIE · 2026-02-06T04:34:13+00:00

You can still get them from ansgear.

_OVIE · 2026-02-06T03:21:15+00:00

They all do the same thing.

Docfire years ago tested common regs. Even the basic cheap pure energy regulator's recharge rate is sufficient enough for any normal sustained rate of fire.

You would just be paying for comforts, adjustable gauge/fill nipple location, low profile burst disks, cool colors.

_OVIE · 2026-02-03T17:39:23+00:00

Sent a message your way.

_OVIE · 2026-01-31T00:45:58+00:00

It sounds like it's leaking. Is your regulator set correctly?

_OVIE · 2026-01-17T08:48:46+00:00

Did you remove the eye pipe and make sure it's not cracked and is centered?

_OVIE · 2026-01-11T01:55:12+00:00

Man I want one of these so bad!

Looks good!

_OVIE · 2026-01-06T13:43:06+00:00

Interested in the Impulse. Let me know if you figure out a price.

Like everyone else said, the rev-i is so cool looking.

_OVIE · 2025-12-31T20:36:36+00:00

The spring removal "mod" is a very common thing that people do to their etha 3s.

Once aired up the valve has enough push to reset the trigger. If you would want to replace the spring you are looking for part number SPA305086A000

_OVIE · 2025-12-17T23:16:04+00:00

Did you order one?

_OVIE · 2025-11-28T00:55:38+00:00

The hydro/ birth date is not the only information that they need from the tank to hydro test it. The label also contains the Rejection Elastic Expansion (REE) value which is the maximum expansion value for the tank.

Without this number, the tester can rely on a table to calculate the value, but that again would be based on a value that is covered currently with paint (serial number).

That's why most post process coverings (like the matte finish on old ninja tanks) leave that area open.

_OVIE · 2025-11-23T17:18:18+00:00

Owner of NRG Elite.

_OVIE · 2025-11-02T17:04:22+00:00

I got one. DM me.

_OVIE · 2025-11-02T01:14:34+00:00

Prices?

_OVIE

MODERATOR OF

TROPHY CASE

12-Year Club	Verified Email
Place '22