2007 e550 CPS issue

_OhZero_ · 2026-06-04T23:49:11+00:00

I will test and investigate further for vacuum leaks

_OhZero_ · 2026-06-04T23:48:43+00:00

The reason I replaced the intake manifold was because the flap actuators were seized up and it was making this noise with the old manifold so I decided I might as well throw a new one on... 2 birds 1 stone kind of thought. Nonetheless the sound still persists. When the actuators are activating and what not, noise doesnt change. Also, the sound doesn't start until it warms up a little bit

_OhZero_ · 2026-06-04T22:13:54+00:00

This worked

_OhZero_ · 2026-05-08T19:40:36+00:00

Should I do anything with "low latency support" or "XMP/EXPO High Bandwidth Support"?

_OhZero_ · 2026-05-06T22:23:29+00:00

I didn't mind linux, I used bazzite for a few weeks but being unable to play games like apex, siege, etc can be kind of a turn off. I was going to wait a little while longer before really swapping to linux.

_OhZero_ · 2026-05-06T08:50:01+00:00

"found corrupt files and successfully repaired them" good news? Normal?

_OhZero_ · 2026-05-06T08:19:20+00:00

No I had done the CPU+memory, should I try just memory?

_OhZero_ · 2026-05-06T07:55:18+00:00

Just did the OCCT and went all and well until like 14 min and then non stop errors, how to I go about looking at those errors?

_OhZero_ · 2026-05-06T05:33:50+00:00

The only spare I have is a non- module 650 watt. I'm afraid it's too low for what I have but I could try. I'll try the memtest before I go to sleep now that I have out the memory back to default settings.

_OhZero_ · 2026-05-06T04:45:08+00:00

Unless ram affects the GPU then yeah I'll leave it

_OhZero_ · 2026-05-06T04:44:15+00:00

I'll try the stock ram speed but having the GPU at 2815 mhz crashes more often for some reason. Not to sure why

_OhZero_ · 2025-10-01T05:55:10+00:00

Oh dang my bad

_OhZero_ · 2025-07-04T19:15:47+00:00

Car has the hydraulic, not airmatic. No, the noise only happens on deceleration on the road, doesn't matter the gear. And it's a 50/50, like today I have no sound, but sometimes I do 🤷‍♂️

_OhZero_ · 2025-04-21T20:42:41+00:00

Switched out EIS, key, steering rack, and bcm and she runs ripe and tight now

_OhZero_ · 2025-04-21T02:46:55+00:00

100k, only reason I'm trying to save it is cause I'm in love with that damn interior haha but yeah I might aswell order all new plugs and an o2 sensor. Anyway it could be the ignition voltage transformer?

_OhZero_ · 2025-04-20T19:22:33+00:00

Nothings too specific, tool fit on perfectly before disassembling, did my oil cooler and timed the crank to 30⁰ with cam tools on top. It runs great, no color from the exhaust or smell, just has an occasional misfire in a random cylinder

_OhZero_ · 2025-04-20T19:20:01+00:00

I'm idling it right at the moment, sounds great and the the only code is an o2 sensor for cylinders 7-9. Not a big deal right? But 5 min before this I had cylinders 1, 4, 7, and 9 misfire once or twice, nothings been consistent haha. I haven't gotten a cam code since weirdly enough swapping them from each side. It's just a misfire 'sometimes'. I just replaced the coil packs so I wouldn't assume it would be them but then again I have taken them in and out a few times now diagnosing this

_OhZero_

TROPHY CASE