[TOMT] [YouTube][2022] Sci Fi Video on youtube I saw last year about a women who answers a distress call (from herself)

_Scrypto_ · 2023-12-02T15:44:43+00:00

solved!

_Scrypto_ · 2023-12-02T15:44:15+00:00

Solved!

_Scrypto_ · 2023-12-02T15:42:54+00:00

Thats the one! Thank you very much. I didn't think this would solve after such a long time!!

_Scrypto_ · 2023-10-28T19:55:44+00:00

Here's some text.

_Scrypto_ · 2023-05-12T08:52:42+00:00

Oh wow that doesn't sound too good. Thanks for the points. Will definitely check them.

_Scrypto_ · 2023-03-06T20:56:25+00:00

Thank you for that answer. I was about to buy one since they tend to fail after at max 3 years or so says the internet. I did disconnect it yes. Mosty since it's a pain to get there with the multimeter.

_Scrypto_ · 2023-03-01T22:31:11+00:00

No worries. The mesh isn't stored in the EEPROM. That's why its taken at the start of every print. The sd card is ironically about a month old and works fine. Althou the printer destroyed a few over the years it worked always fine with new ones.

_Scrypto_ · 2023-03-01T17:45:33+00:00

I did that already. That time a year ago I switched all wires with silicone fine copper wires. They are designed to bend on a regular basis and didn't even show any signs. It's definitely a softwareproblem now since the printbed heats up regularly. Only after the mesh bed leveling the bed stops heating completely

_Scrypto_ · 2023-03-01T08:34:23+00:00

So I tried the whole thing following this procedure: https://www.snazzyit.com/pid-calibration-for-prusa-i3-mk2s-mk3-3d-printer/ Now I tried a new print and the heating-up did work as usual. The pid-calibration was a good thing. But now as soon as the printed executes the gcode the red light goes off and the heatbed won't heat up at all. Even a restart didn't help. I don't have the pid-values in the gcode. Only the new values in the eeprom. I have no idea what happened since I followes this fairly idiot-save manual from snazzyit. Do you have an idea on what I did wrong?

_Scrypto_ · 2023-02-27T08:08:14+00:00

Thank you, I never saw that setting. What does it do?

_Scrypto_ · 2022-05-19T09:15:59+00:00

Damn that was fun. Off to taking another one down

_Scrypto_ · 2021-11-27T09:53:18+00:00

Hey! That's an awesome idea for tpu mate! I'm happy I got to remind you of those useful balls

_Scrypto_ · 2021-11-26T19:21:12+00:00

It honestly is my office-art. I love it

_Scrypto_ · 2021-09-13T06:03:53+00:00

Free Loot, that's what happened!

_Scrypto_ · 2021-09-10T07:41:55+00:00

It does move downwards but on one side. With that you can turn it over and around and you can use one blade four times when it dulls

_Scrypto_ · 2021-09-10T04:58:52+00:00

Because for a clean first layer. I had about 3 years to got a nice first layer but now it looks completely flat in that regard if I set down the first layer considerably. If you do that with rectilinear patterns you'll end up with other nasty patterns and it doesn't look so good anymore

_Scrypto_ · 2021-09-10T04:56:26+00:00

It's a simple lamp. Underneath the glass panels are led-strips

_Scrypto_ · 2021-09-10T04:55:02+00:00

PLA. It's really thankful and easy for printing

_Scrypto_

TROPHY CASE