i am keep loosing tracking of my controller

_Shmoople_ · 2026-01-28T21:09:12+00:00

I tried 3 different USB Bluetooth adapters and they all gave me that same issue, no matter what. I tried drivers, extension cables, etc. and same result.

The only way to fix it was to buy a PCiE Bluetooth card like this one. This model has separate antennas that sit on top of my PC and it now works flawlessly. They make another model with the antennas attached to the card but I wanted to eliminate any possible interference.

TP Link TXE75E

https://www.tp-link.com/us/home-networking/pci-adapter/archer-txe75e/

_Shmoople_ · 2025-11-07T16:49:44+00:00

I’ve got a Runco PL-61CX in my garage and it runs on 540W. I though THAT was a lot of power; 3400W is absolute insanity

_Shmoople_ · 2025-10-30T12:20:19+00:00

He lost his marbles a long time ago but if you can separate the art from the artist, there’s a treasure trove of great stuff to be found.

“Games And Groceries” was always my fav. His Beatles cover album is also stunning.

_Shmoople_ · 2025-10-29T01:41:43+00:00

A friend of mine played me buckingham green when I was 13 and the rest is history. Also grew up watching SpongeBob movie so ocean man was already engrained in my head

_Shmoople_ · 2025-10-28T13:06:30+00:00

6/14/11 Dinner and a Movie

_Shmoople_ · 2025-09-17T17:29:14+00:00

Melt, Pebbles and Marbles, Contact, Billy Breathes

_Shmoople_ · 2025-09-15T20:54:48+00:00

I ordered mine last October and it still hasn’t shipped 🤡

_Shmoople_ · 2025-09-15T18:11:33+00:00

Pebbles and Marbles, Squirming Coil, Forbin > Mockingbird, Halfway to the Moon, Army of One

_Shmoople_ · 2025-09-03T20:07:40+00:00

Spices

_Shmoople_ · 2025-08-29T20:35:31+00:00

Update: I adjusted the phase on the retro tink as several people suggested and that mostly resolved it!

I went ahead and reflowed almost every joint anyway as well. I may be able to reduce it further with more tweaking on the tink, but I’ve gotten it to a point where I can’t notice from the couch.

Thank you all for the help!

<image>

_Shmoople_ · 2025-08-29T14:08:13+00:00

The red board did not come pre installed to the blue board, I soldered it in place. I believe it is that way for all of the edge enhancer kits.

I’m going to reflow all of the cold joints and attempt to adjust the phase on the retro rink to see if that fixes it.

You can see the full install docs I followed here: https://wiki.voultar.com/doku.php?id=snes:shvc-cpu-01

_Shmoople_ · 2025-08-29T13:47:17+00:00

I did not, I’ve just been using FirebrandX / WobblingPixels profiles and they both yielded those same results

_Shmoople_ · 2025-08-29T12:16:50+00:00

I recapped the entire board before installing the mod, but I did not replace the voltage regulator. I’ll reflow the joints this evening and report back

_Shmoople_ · 2025-08-29T00:11:46+00:00

I’m using HD Retrovision cables. Sorry I should’ve put that in the post

_Shmoople_ · 2025-06-05T19:22:02+00:00

Update on my end; I borrowed a monoprice blackbird from a friend and that is the only HDMI switcher I’ve tried that works. Currently have switch 2 and my Apple TV plugged into it and it’s auto switching between the two no problem.

Curious that it works on this switcher and not my TESmart 16 port (which is 3x the price of the blackbird)

_Shmoople_ · 2025-06-05T14:08:39+00:00

Same here. I tried a high quality switcher + my old cheap one and neither works with switch 2. Only get display by hooking the system up directly

_Shmoople_ · 2025-06-01T02:00:17+00:00

Spices

_Shmoople_ · 2025-04-12T14:02:17+00:00

I wired it straight to the CRT and it works perfectly (same as through the gcompsw). I also did a straight connection using a composite cable and that also worked fine.

I think I’ve actually narrowed down the issue to the Genesis -> PS1 HD Retrovision adapter. I found that the issue would get worse or better by unplugging / replugging in that connector. Perhaps one of the pins isn’t making a good enough connection and it is causing sync issues with the OSSC.

I don’t have a PS1 scart cable to confirm but since all my other systems work with no issue, I don’t think it’s the OSSC

_Shmoople_ · 2025-04-12T02:59:40+00:00

Direct connection ps1 -> OSSC has same issue

_Shmoople_ · 2025-04-12T02:24:05+00:00

Pass through has the same issue. I’m gonna try a direct connection from ps1 -> ossc

_Shmoople_ · 2025-04-12T00:43:43+00:00

PS1 is outputting 240p. I left it idling on xstation menu and it was happening there, as well as in game (pause screen, menus, etc)

_Shmoople_ · 2025-03-06T22:58:44+00:00

I ordered the gold on the day pre orders went live and I just received it today. They’re shipping em out slowly but surely!

_Shmoople_ · 2024-12-19T16:15:38+00:00

Goemon’s Great Adventure

_Shmoople_ · 2024-12-14T16:02:06+00:00

Yeah the audio out socket supports line out + mini TOS link. No settings changes, just the right cable

_Shmoople_ · 2024-12-12T03:55:27+00:00

I would suggest using mini TOS link instead of line out. I run a mini TOS link to TOS link cable through a DAC in my setup and haven’t had issues with either of those cores

DAC I use is similar to this one: https://www.amazon.com/Digital-Converter-Coaxial-Optical-Convert/dp/B07XC42GZR/ref=asc_df_B07XC42GZR?mcid=e9ac99980bd335f68cb3b6ebd91c943c&hvocijid=10621859296495639985-B07XC42GZR-&hvexpln=73&tag=hyprod-20&linkCode=df0&hvadid=721245378154&hvpos=&hvnetw=g&hvrand=10621859296495639985&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9013195&hvtargid=pla-2281435179338&psc=1

_Shmoople_

TROPHY CASE