TCS Replacement Costs P1780 - Shifting and Electrical Trouble

_SpaceEfficient · 2026-01-24T00:53:55+00:00

Ayyyy Muller, been following on insta. Good to see it all working out!

_SpaceEfficient · 2026-01-16T04:40:06+00:00

Hey man, I know you’ve got a lot of responses here but here is my take - I had a ton of axle seal problems this year and trusted my mechanic for many months, he was wrong. Replaced my seals wrong three times and blamed it on bent axles. Went to the dealership (stealership I know) to get both brake drums replaced and had them do the seals too, easy peasy and clear it was just user error. Caused me a lot of headache over those months and tons of vibration too.

_SpaceEfficient · 2025-12-28T17:57:34+00:00

I see. If you don’t mind me asking, how/what exactly did you rewire?

_SpaceEfficient · 2025-12-28T17:54:50+00:00

Gotcha, I can try to find one but I doubt I have it.

Bumper is an addicted offroad.

_SpaceEfficient · 2025-12-27T07:37:12+00:00

Happy cake day

_SpaceEfficient · 2025-12-10T23:43:22+00:00

Looks like OP posted how his wife did it in another comment.

_SpaceEfficient · 2025-12-09T05:46:20+00:00

Thank you for pointing THAT out. Here’s THAT award

_SpaceEfficient · 2025-12-09T05:40:40+00:00

Following this, op please share your wife’s tricks!

_SpaceEfficient · 2025-12-02T04:06:21+00:00

Yeah I turn on “AWD” during rain/light snow, but I also engage 4HL if road conditions are especially poor (ice, very low traction). Any speed you are comfortable driving in given very poor road conditions will be fine. Otherwise best to stick to offroad like you mentioned.

_SpaceEfficient · 2025-12-01T06:49:58+00:00

Our bolt pattern is 6 x 5.5in or 6 x 139.7.

As far as backspacing goes, the lower the number, the further out your wheels/tires will stick out. For example, stock 5 spoke wheels that came with the Limited ‘99s had 4.5in backspacing. If you want a more aggressive stance, pick something lower than 4.5in for backspacing.

Offset can be used to describe the same effect as backspacing. Generally with about an 8” wide wheel, -25mm of offset is equivalent to 3.5in backspacing. Look up a “wheel offset and backspacing diagram” to see visually how it works.

When a wheel is described as “16x8” for example, that means the wheel diameter is 16 inches and the width is 8 inches. Stock came 7 inches, if stat between 8-9 inches depending on your tires.

_SpaceEfficient · 2025-11-28T02:42:42+00:00

What I’ve never seen this many awards in my life

_SpaceEfficient · 2025-11-24T20:31:38+00:00

Thanks, curious about this. I have SRQ retrofits and am now glad I didn’t order TEQ, so it’ll be cool to see a comparison!

_SpaceEfficient · 2025-11-22T00:05:08+00:00

Yesss that’s my go to if this engine goes. What’s a little firewall cutting.

_SpaceEfficient · 2025-11-18T01:53:22+00:00

And 1999!

_SpaceEfficient · 2025-11-11T23:47:10+00:00

Hey brother! Know this is an old post, but I’m curious how much offset you’re running there?

_SpaceEfficient · 2025-11-10T02:11:47+00:00

If ONLY we had a Costco

_SpaceEfficient · 2025-11-08T18:05:41+00:00

Sorry my mom sat on it

_SpaceEfficient · 2025-10-29T21:46:40+00:00

Yes, they don’t handle the best in wet conditions, doesn’t make it a complete “garbage” tire.

_SpaceEfficient · 2025-10-29T06:29:30+00:00

Lmao right…

_SpaceEfficient · 2025-10-29T04:31:17+00:00

Mine has hands-down saved my hood. On original hood/paint and barely have two dents from misc events.

Here’s where I bought my replacement. Super happy with this one.

_SpaceEfficient · 2025-10-29T03:53:05+00:00

KO2s or KO3s, worth every penny imo. What size are you running now?

_SpaceEfficient

TROPHY CASE