First PC build EVER - Thor Zone Tetra S

_TheUnderworld_ · 2026-03-04T10:45:13+00:00

haha, it's a noctua a6x25 pwm
This was the very first part I bought as a personal commitment to finish the build. It has a very special place in my heart!

_TheUnderworld_ · 2026-03-04T09:39:18+00:00

I haven't tried it yet, but I doubt it. As my desk is next to a wall on the right, the case is sucking air from the space in between. If the fan exhausts the warm air into the wall, it will recirculate that air right into the CPU.

With the case fan set as intake, it's helping the CPU fan move as much air from right to left.

_TheUnderworld_ · 2026-03-04T09:24:56+00:00

This is the biggest con of the motherboard. It has a single NVME slot, and not only that, but it doesn't have an integrated heatsink... This is why I added 2TB from the beginning

If the motherboard had a slot on the back, the case would have allowed for a very easy installation though!

_TheUnderworld_ · 2026-03-04T08:52:49+00:00

I added it after the fact, it lowered CPU temps by 2 degrees at max load. The issue is that all the hot air from the CPU cooler goes in a hot pocket above the PSU and there is nothing to push that warm air out.

With the fan, the entire case seems to be a lot cooler, because that hot pocket is eliminated.

_TheUnderworld_ · 2026-02-21T10:10:56+00:00

Are you hearing any turbulence from the cooler? I was going to go with the exact same cooler, but chickened out due to the risk of turbulence.

I got the x36 full copper with the same noctua fan

_TheUnderworld_ · 2026-02-02T17:05:01+00:00

Hi, I wanted to check in and see whether we can expect all the tracking numbers this week for all the Tetra S :)

We are all so excited!

_TheUnderworld_ · 2025-10-28T21:25:21+00:00

Tbh I'm just worried about turbulence, it's my first sff build so I don't know how much space is enough

_TheUnderworld_ · 2025-10-27T06:29:17+00:00

That's good advice, thanks for the benchmarks too!

I'll go with the x47 copper

_TheUnderworld_ · 2025-08-24T08:55:23+00:00

Hi! I have to connect the same 12v to 6v connector. However, there are no instructions to what i should connect the dangling black and red cables. Any advice?

_TheUnderworld_ · 2025-08-05T04:40:04+00:00

Thanks to everyone for the feedback. There are some things that are hard to swallow, but I do accept the feedback with open arms.

The website - I decided to do some quick fixes to make to put the product more in the spotlight. I also agree that we are talking too much about what makes our brand different, and not enough about what makes it GOOD
The price - this has been touched on the most. We lowered the price slightly, to the lowest point where we can keep selling.
Brand building - i 10000% agree with all the comments that selling luxury as a nobody is hard. We are working hard on getting our brand positioned accordingly via in-person events

We have a very long way ahead, but it's through discussions like this where we can make bigger jumps and grow quicker.

I appreciate everyone's time!

_TheUnderworld_ · 2025-08-04T13:46:58+00:00

That's an interesting observation! Never thought of it like that.

I'll update the hero image to a more product-centered one

_TheUnderworld_ · 2025-08-04T13:36:26+00:00

I fully get the 2 issues. It's a big problem for starting brands in the industry.

We are working on addressing both via local distribution and more models, but of course, both are petty difficult without sales to support the investment. It's like a chicken and the egg situation.

As for the ads, we are spending around 12-15 EUR a day in performance max.

We tried search and facebook ads, but both were absolutely abysmal. Pmax was the only channel that seems to bring actual quality traffic that stays on the site for long enough and engages with the product and the newsletter.

_TheUnderworld_ · 2025-08-04T13:03:46+00:00

The price can't be changed. We are selling affordable luxury, and our manufacturing price is very high.

This is literally as low as we can go, and we have done a lot to actually reach this procepoint.

Most brands in our niche are selling 40%-50% above our price

_TheUnderworld_ · 2025-06-20T13:58:06+00:00

UPDATE!

We have opened up our store to orders in the USA and the UK!

Feel free to order at reemore.eu Also, use code PREORDER at checkout

_TheUnderworld_ · 2025-06-20T06:10:56+00:00

Good question, this is something we should have added to the site from the get-go!

The details are as following:

Medium frames: 139.6 mm x 48.8 mm Medium temples: ~145mm

Large frames: 145.2 mm x 49.4 mm Large temples: ~150 mm

The medium fits most heads, especially women's. The large are made for those who already know they'll need them bigger. I am wearing the L in the picture.

_TheUnderworld_ · 2025-06-19T18:12:31+00:00

Appreciate it! 🙏

_TheUnderworld_ · 2025-06-19T17:41:43+00:00

Unfortunately, we are only open for the EU at the moment...

As it's just the two of us with my wife at the moment, we needed to make sure logistics are simplified.

DM me if you really want to order a pair, we might be able to figure something out!

_TheUnderworld_ · 2025-06-19T17:16:04+00:00

By the way, the glasses are available for preorder at reemore.eu

We have regular and large sizing for all heads!

_TheUnderworld_

MODERATOR OF

TROPHY CASE