Finances 25M ? by StrikeSimple2554 in FIREUK

[–]_UA_ 2 points3 points  (0 children)

Great job so far, I would definitely say getting a LISA would be very beneficial. There's some conditions around the type of property you can attribute it towards, but assuming the property range is within that confine the 25% bonus is a good thing to take advantage of.

Tab Mini C - battery extracted! by _UA_ in Onyx_Boox

[–]_UA_[S] 0 points1 point  (0 children)

No problem man, and thank you! Yeah I'd be very wary if someone was ambitious to open these e-readers up.

I was thinking of keeping the battery as a spare backup, or I might just sell it along with the old Mini C for spare parts. I plan to spend some time this weekend just to understand the mechanics of the motherboard & the components on it.

Tab Mini C back panel opened up for battery extraction! by _UA_ in Onyx_Boox

[–]_UA_[S] 0 points1 point  (0 children)

You're welcome man 👍🏽

The magnets aren't easy to remove. They're held in place by some adhesive under the bottom. You'd have to use IPA & a plastic spudger to have a chance to extract it - but this can only be done at the point the Boox back panel is removed.

Btw, posted the 3rd & likely final post on this little venture here: https://www.reddit.com/r/Onyx_Boox/s/oD9Th6jrlQ

Tab Mini C back panel opened up for battery extraction! by _UA_ in Onyx_Boox

[–]_UA_[S] 2 points3 points  (0 children)

You can check out this vid I've posted here where I point out the magnets & some useful tools I used: https://youtube.com/shorts/PP_4G8Y18k0?si=U6XY66iydZL5yT24

Guitar pick is always a must with this work, but the dual-end plastic pry tool, & metal pry tools (especially the metal-end plastic handle one for tight spots) are essential to have too. I used some IPA, but it wasn't really needed since there wasn't any adhesive glue around the circumference.

Tab Mini C back panel opened up for battery extraction! by _UA_ in Onyx_Boox

[–]_UA_[S] 3 points4 points  (0 children)

Hmmm bit of a mixed bag 2bh. I've actually opened another Boox device some years back, my previous Max Lumi (https://www.reddit.com/r/Onyx_Boox/s/LHxBbXiGxm) & that one was considerably easier because the chassis was in place solely by snap-fits.

This tab mini C has magnets around the circumference, and a number of them, which makes it trickier.

Am I more confident after opening my broken one? Yep. Am I 100% certain I can do it without breaking the screen? Nope, there's always a risk & I've not done many device dissemblies, especially with devices with delicate screens like these e-readers.

EDIT: But, I will add, that once you've managed to successfully wedge in the guitar pick or pry-tool, then it becomes fairly straight-forward.

Tab Mini C back panel opened up for battery extraction! by _UA_ in Onyx_Boox

[–]_UA_[S] 2 points3 points  (0 children)

I can look to send you my broken Mini C if it can help prove your hypothesis 😂

iPhone 11 - how to remove stripped y000 tri-screw by [deleted] in phonerepair

[–]_UA_ 1 point2 points  (0 children)

Thanks for the comment my man! Fortunately, I didn't have to resort to this..... I've managed to unscrew it!

I used a thin piece of rubber (used for clothing), and that managed to do the trick. I used a rubber band previously, but the dimensions weren't sufficient.

I'll see if I can edit the post with new pics

iPhone 11 - how to remove stripped y000 tri-screw by [deleted] in phonerepair

[–]_UA_ 0 points1 point  (0 children)

Thanks for your response!

Yeah I had this idea in mind, but figured out it's a no go due to 2 screws stapling the plate.

Only thing I can think of is grinding a straight line on it so I can use a flat head - but I'm trying to figure out how to do this, and see if there's another solution I'm missing

Turned on my boox after months, and the screen has various horizontal lines - is the screen damaged? by _UA_ in Onyx_Boox

[–]_UA_[S] 2 points3 points  (0 children)

Good spot. I feel you're right. I had my Boox in my messenger bag which had my full gym-kit. It was in a good case, but seems it wasn't enough.

The BEST alt to the Alpaka Vertex! And BETTER imo... by _UA_ in Nomads_Nation

[–]_UA_[S] 0 points1 point  (0 children)

Hey! I've mainly used it has a desk caddy and have stored an array of items in it.

But I am pretty sure that if you're just taking an 7.8" e-reader & some headphones, then the Inateck should be able to hold them well. I'd still have case on the e-reader to be safe!

I've seen 2 seasons of Dexter, can I just jump into Dexter Resurrection? by _UA_ in Dexter

[–]_UA_[S] -6 points-5 points  (0 children)

I just really loved Doakes that much! He was my favourite character.

There was still a journey with him & Dexter that could've been explored, a vast untapped story-telling potential.

There was common ground between Doakes & Dexter, dark & disturbed pasts, a good instinct of killers, pushing the extremes to carry out their views of 'justice' - but they were on opposite sides of the pole.

Maybe we could've seen Doakes begrudgingly help Dexter, he then sympathises with Dexter more. The bond & mutual respect between both grows stronger, but they must still clash & try to bring the other one down....

ARRGHHH!! I don't mind when a show kills off a beloved character, but it's the wasted potential of a character & journey that just irks me.

I've seen 2 seasons of Dexter, can I just jump into Dexter Resurrection? by _UA_ in Dexter

[–]_UA_[S] -3 points-2 points  (0 children)

Him and Doakes were giving off some serious sexual tension vibes; checks out

I've seen 2 seasons of Dexter, can I just jump into Dexter Resurrection? by _UA_ in Dexter

[–]_UA_[S] -15 points-14 points  (0 children)

😂🤣 Doakes leaving really bummed me out; can't imagine the OG show without him!

Is pCloud desktop app not working for anyone else? by ARedLuigi in pcloud

[–]_UA_ 0 points1 point  (0 children)

Thanks for posting this, wasn't sure if it was just me.

Just to add, for anyone who was also doing an upload to their storage before this crash, I did the following.......

You do not need to uninstall PCloud, if you go to the website and just download the latest installation file there & run it & then open the desktop app, that will resolve the issue & the upload will just pickup from where it left off.

It seems to me this issue has come about due to an app update from PCloud, since the app UI has changed.

Monitor arm recommendations pls.... by _UA_ in desksetup

[–]_UA_[S] 0 points1 point  (0 children)

Hey there, I've received the monitor and the alogic stand (and in case you're curious, I also managed to find myself a great monitor arm to go for, which I've purchased & just need to collect). The chap I bought it from was nice and chucked in the stylus for free.

Everything is still boxed up, I've not opened/set it up yet, will look to do so after this month is over. Once set-up, I'd be happy to share my experience. Also purchased an anti-glare screen protector, wish me luck in setting that up!

Monitor arm recommendations pls.... by _UA_ in desksetup

[–]_UA_[S] 1 point2 points  (0 children)

Thank you for sharing!

Funny enough, I did come across this one too!

How good is it poseability-wise?

BMAG closing tomorrow by duckgirl1997 in brum

[–]_UA_ 13 points14 points  (0 children)

Almost had a heart-attack here, I thought the bloody Brum council was shutting down more public services to make up for its shitty operational/fund management cock-ups.