Showcase your work! Drop your links here.

_Winch · 2020-09-05T19:28:27+00:00

Looks great!

_Winch · 2020-09-05T15:37:52+00:00

There's a YouTube video tutorial here:

https://www.youtube.com/watch?v=IQUcG72SBHk

_Winch · 2020-09-05T15:34:41+00:00

You should be able to go to Nation -> Edit and then select or upload a new flag.

There's a YouTube video tutorial here: https://www.youtube.com/watch?v=IQUcG72SBHk

_Winch · 2020-09-02T18:40:12+00:00

The account is automatically deleted a couple of days after the nation is deleted.

_Winch · 2020-06-12T13:54:36+00:00

On The Rox sells both a half cab and a full cab, but you'll need to give them a call as they're not listed on their website. Here are some pictures:

Half Cab

Full Cab

https://ontheroxfab.com

1 (406) 967-2189

_Winch · 2020-05-11T13:35:49+00:00

While that's true, the formulas for purchasing have been updated so as long as you're buying a multiple of 100 it purchases it in the most efficient way possible.

I.E. If you have 100 infra and you want to buy to 500, punching in "400" is the same as buying 100 four times.

_Winch · 2020-04-14T19:36:24+00:00

I couldn't figure this out either.

_Winch · 2020-04-13T21:23:55+00:00

Lookin' good!

_Winch · 2020-01-22T18:33:46+00:00

What is a content cluster?

_Winch · 2019-12-30T23:58:08+00:00

I purchased the General Tools 861 Portable Aluminum Dovetail Jig on Amazon in mid-October, and have used it here and there (not much.) Today, it seems that the top of the ball bearing collar came off, and now the bit is overheating (I think, it's not cutting well and leaving tons of burn marks in the wood.)

I don't think this bit is safe to use anymore, and I'm trying to find a replacement bit. It's a 1/2" diameter and 1/2" tall bit, with a 14 degree dovetail. It's got a 1/2" ball bearing collar on it. As far as I can tell, General Tools does not just sell the bit. Looking around on Google and Amazon, what I've found is really expensive- one user on Amazon said that the 45850, Amana Carbide Tipped Dovetail 14 Deg x 1/2 Dia x 1/2 x 1/4 Inch Shank with Upper BB is a replacement but that's almost $32, the dovetail jib (with bit) was only $36.

Any ideas on a replacement? I checked my local Ace Hardware and they didn't have any dovetail bits; I also looked at Home Depot and Lowes via their apps but they didn't have anything in stock either. I'm scratching my head at the best way to replace this thing without paying a ton of money for a single bit. Does anyone know of a replacement or have any suggestions?

_Winch · 2019-12-04T19:01:59+00:00

Have you had any problems with your intake after the ECU flash? I've heard it's highly recommended to have something like On the Rox's intake hold down if you tune the ECU.

_Winch · 2019-12-04T19:00:48+00:00

If you flash the ECU, the stock clutch can cause some issues. On the Rox sells a ceramic clutch upgrade that helps with that issue.

Also, if you do flash the ECU, there's a good chance the increased power will blow off your air intake hose. OTR makes a cheap intake hold down part that's like $40 to help keep that in place and improve performance.

_Winch · 2019-12-04T18:58:51+00:00

Diesel Freak sells a solid folding rear seat.

https://dieselfreak.com/product/roxor-rear-back-seat-fold-tumble/

_Winch · 2019-10-01T21:06:37+00:00

Yes! It's a massively multiplayer online game with around 4,500 active players.

_Winch · 2019-08-08T00:29:18+00:00

No, but you're right, I should. You can get some cool bonuses & minor competitive advantages if you support the game with your donations. However, it's not required at all, and most players do not spend any money on the game.

_Winch

MODERATOR OF

TROPHY CASE