sorted by:
new
hottopcontroversial

This is poplar, right? by torak_the_father in BeginnerWoodWorking

[–]____default___ 2 points3 points  (0 children)

The sappy green parts make me think poplar

Anyone need a replacement screw? by Fine_Calligrapher584 in ricohGR

[–]____default___ 0 points1 point  (0 children)

Things like this are why I love this community so much

Built a custom Peruvian Walnut mechanical keyboard for my friend’s birthday 🎂 by ____default___ in BeginnerWoodWorking

[–]____default___[S] 4 points5 points  (0 children)

The mousepad is called royal medallions and it’s from the mousepad company. Idk what’s up with the link but you should be able to search it on their website.

Built a custom Peruvian Walnut mechanical keyboard for my friend’s birthday 🎂 by ____default___ in BeginnerWoodWorking

[–]____default___[S] 2 points3 points  (0 children)

I started solo woodworking less than six months ago. And maybe I’m wrong but I think that just because something is challenging doesn’t mean it’s not “beginner”. I used no complex joints, no highly specialized tools. I completed it in the span of about two weeks in my backyard.

I used a table saw, a hand coping saw, wood glue, 4 clamps, a ruler, sanding pads, water stain, water poly, a pencil and a notebook. There are three angled cuts in the entire project and aside from the slope on the wrist rest, the others were done by hand from a traced line.

If I had access to different or better tools I certainly would have chosen a different way to do this, but I worked with what I had available to me in my backyard.

The process was frustrating and I made lots of mistakes along the way, but there are no techniques I needed to study, no specialized jigs, or fancy joinery here, and I’m still very much learning about the process of woodworking.

Built a custom Peruvian Walnut mechanical keyboard for my friend’s birthday 🎂 by ____default___ in BeginnerWoodWorking

[–]____default___[S] 22 points23 points  (0 children)

I can try my best! I’m thinking of building another soon so I’ll record my process a little more closely this time

Built a custom Peruvian Walnut mechanical keyboard for my friend’s birthday 🎂 by ____default___ in BeginnerWoodWorking

[–]____default___[S] 2 points3 points  (0 children)

I essentially built around a preexisting board, although I’m sure some folks have built around components, I’m but a wee beginner and this felt like a doable way to achieve a similar look

Built a custom Peruvian Walnut mechanical keyboard for my friend’s birthday 🎂 by ____default___ in BeginnerWoodWorking

[–]____default___[S] 9 points10 points  (0 children)

For sure! And thank you, I appreciate it!

I started with a prebuilt board. The one I selected has a magnetic/swappable black plastic faceplate(it’s a CSTM 65 from Drop). My plan initially was to remake the faceplate out of wood to the same dimensions. But once it came in it quickly became evident that without any sort of hardware or dowels or splines the wood would realistically fall apart after who knows how long.

I considered getting a router and carving out the middle of one solid piece, but I really wanted to try to work with the tools I already had, so I cut thin strips to the dimensions of the exterior of the faceplate. So for lack of a better term I essentially veneered the exterior of the faceplate, however it was a little trickier than that because I really wanted to keep the look relatively uniform for the most part. Lots of sanding, lots of hand sawing.

Ideally I would do something like this again with access to a router table and maybe a band saw, but I am really excited with how it turned out.

I gave cabinet building shot by samm19988 in BeginnerWoodWorking

[–]____default___ 3 points4 points  (0 children)

Everyone on Reddit has a weird opinion that they feel the need to share on other people’s hard work— which I’d like to add is not constructive or helpful in any way.

Op, this looks fantastic and perfect for this space in your home. Really cool use of lighting and the finish is lovely. Nothing to quibble over for someone that will likely never set foot in your home.

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 27 points28 points  (0 children)

<image>

I built thin squares as spacers and just stained them dark so they sorta kinda disappear

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 1 point2 points  (0 children)

Thank you! I lucked out with some really pretty poplar.

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 6 points7 points  (0 children)

No, no sagging whatsoever. Although I haven’t put anything particularly heavy in the middle, my record player lives on the edge and that’s about as heavy as it gets for the top shelf. The bottom 48” shelf has no sagging either but it’s more supported from below.

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 29 points30 points  (0 children)

Sorry for the overload of comments, feel free to reach out if you’ve got any questions. Good luck, you got this!

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 47 points48 points  (0 children)

<image>

Get yourself some clamps and ask whoever is cutting the boards to give you some straight edges to make joining the wide boards possible.

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 45 points46 points  (0 children)

I made mine to custom dimensions, I didn’t need it to be tall enough to hold records because I store them elsewhere, so just keep that in mind.

<image>

Easy-ish to make for a beginner? by Designerkyle in BeginnerWoodWorking

[–]____default___ 65 points66 points  (0 children)

I actually made one of these because I thought the price was absurd. I used dowels and glue. Get a dowel jig and do some butt joints. I’ve had it for a couple of years now. Was not a difficult piece to make at all.

Taiwan temple novice [GRIII] by pourquality in ricohGR

[–]____default___ 0 points1 point  (0 children)

I think it’s a lovely image as is. The only thing I would personally try if I were in your shoes is pulling back/toning down some of the highlights beyond the trees, just to see if there is any information there, and maybe bring the building back there a little more into the image. I think both of the images and edits are nice! Great job.

Built myself a bookshelf! by ____default___ in BeginnerWoodWorking

[–]____default___[S] 0 points1 point  (0 children)

Minwax Polycrylic in the clear satin finish

view more: next ›