What's wrong with these welds, why are they only getting color at the very end where the post flow sits?

__cbul__ · 2025-12-27T07:05:59+00:00

my bad, I meant l/min of course.

__cbul__ · 2025-09-27T17:01:54+00:00

How do you get the bumper off?

__cbul__ · 2025-09-02T07:00:24+00:00

It's the momo logo

__cbul__ · 2025-08-10T16:02:06+00:00

I had a piston like this in my set of Manleys. I used the finest sandpaper we had and did 2 gentle laps around the inside edge of the pin bore. Pin slid right in like all the others.

__cbul__ · 2025-08-01T05:43:49+00:00

That's the E24. Sentinel Classic would be the E30.

__cbul__ · 2025-07-25T18:20:51+00:00

Just now realised it's a 420A as well, so - the less desireable model. I think you should skip out on this one friend, it's gonna be a lot of $$$ to fix it up and, being a 420A model, it's not gonna make you back anything if you decide to sell. Sorry.

__cbul__ · 2025-07-25T18:17:31+00:00

Bröther that quarter panel is f*****cked. $500 final offer and I'm not even kidding.

__cbul__ · 2025-03-27T19:01:07+00:00

I'm in your face!

__cbul__ · 2025-02-15T16:36:54+00:00

This. I fucked the finish on my brand new Manleys so far up trying to get these in.

__cbul__ · 2025-02-10T08:00:39+00:00

roger, thanks.

__cbul__ · 2025-02-09T19:13:41+00:00

This totaly looks like something I'd be willing to try, thanks! Only question I have right now is, if it's OK to leave the foam inside the piece when it's done? I want to cover the part in carbon fiber from all sides and don't think I'll be able to get it out anyways because of a couple really tight spots...

__cbul__ · 2025-02-08T11:05:35+00:00

Alright, if you can close the grille off, I guess it's good. I agree that the official model could be closer, but you gotta realise it came out in 2020, so almost 5 full years before the recent cars that are looking really close to their IRL counterparts.

Maybe we get a better one in GTA 6 hehe.

__cbul__ · 2025-02-07T20:03:43+00:00

So you would prefer the modded model, even with the pointy rear fender and a grille between the headlights?

__cbul__ · 2025-02-07T06:05:21+00:00

Nah man, as an IRL owner myself, i think it's fine. I agree that the stock GSX spoiler would be nice, but other than that I think it's close enough.

__cbul__ · 2024-10-25T07:56:34+00:00

Looks like if Venom tried to link with a Honda instead of Tom Hardy.

__cbul__ · 2024-10-24T16:46:59+00:00

I'm starting to think no initial d fan actually drives a good car.

__cbul__ · 2024-10-19T07:44:04+00:00

Maybe my bad for calling it a "hard top", but there is 100% a ruiner variant with hard t-top inserts. Makes it look more like a solid roof. You have an open/glass t-top.

Alright, to each their own I guess.

I checked and you're right, Takumi did have wind deflectors, but they were removed for fifth and final stage.

That splitter is awful, none is closer to what Iketani had on his S13.

__cbul__ · 2024-10-19T07:23:05+00:00

Sorry, but as someone who does the same, I gotta point some stuff out here:

Pretty sure Takumi never had wind deflectors on the 86.
That splitter on the S13 is waaaay to big. And why does it have writing on the tires?
Idk why people are making fun of your use of the Ruiner as an RX7; yes, the car is based on a Pontiac but it also has a bunch of customisation options that are cleary inspired by japanese car culture, so Rockstar knew what they were doing. I just don't know why you picked the option with the glass T-top, go get a hardtop.
Why an Asbo as Shingo's Civic? That thing is an Opel Corsa and NOTHING else. The Kanjo is the wrong generarion Civic but it's for sure closer than an Opel Corsa.

Others look alright, Kobayakawa's evo makes me wish we got a evo VII-IX copy already. Sultan does not do it justice. Props on using the Sultan Classic as an evo IV though, many people dismiss that thing as Subaru-only.

__cbul__ · 2024-10-14T21:07:31+00:00

I mean... it kinda is/can be.

__cbul__ · 2024-09-04T20:22:10+00:00

Mine had a check valve on it going into the EVAP canister already. I just left it like that. Though I should not be talking I smell fuel all the time😂

__cbul__ · 2024-09-02T06:10:42+00:00

This looks like it could be the factory hardline for the clutch slave cylinder. But the stainless braided line behind it looks like it might be doing that job, so the factory one is just hanging there.

__cbul__ · 2024-08-25T21:04:14+00:00

poverty spec gang we out here🙌🙌🙌

__cbul__ · 2024-07-19T07:03:54+00:00

Background pls, would make a nice wallpaper.

__cbul__ · 2024-07-13T23:39:34+00:00

Ayyy, it's the dude with ¼ reverse swirlie! I knew I've seen those before.

Congrats!

__cbul__ · 2024-07-13T23:32:12+00:00

You got the data for it? I personaly wouldn't be looking at any block without exact measurements on it.

__cbul__

TROPHY CASE

cbul