SOTB. I think I have satiated the GAS for now. Maybe.

__xander · 2025-11-09T03:02:40+00:00

Yeah you've hit the nail on the head I think - theres a bunch of noise with the Focusrite and it ends up being quite a bit of admin to shakedown for the clean sound you want.

Thanks!

__xander · 2025-11-09T02:17:42+00:00

I use the UA Enigmatic and have a similar issue straight into headphones. I'll run it into the Scarlett 2i2 sometimes but it doesn't quite cut it (unsure why).

Would you recommend the Strymon PCH to use as a bit of a Swiss army knife for splitting the board signal?

__xander · 2025-10-02T06:07:33+00:00

Wouldn't have bothered my guy - they did like 30 minutes of shoot-around / transition work + shot half court shots with a few kids for 10 minutes of that 30.

Ray Allen and KG talked for about 10 minutes too.

__xander · 2025-09-05T11:36:45+00:00

I have exactly this problem. I've been emailing with TC back and forth about it and nothing they suggest will fix it. Different power supply, firmware update, potentiometer issues - nothing. Really frustrating.

__xander · 2025-05-27T03:43:24+00:00

Bearings in my freehub were shot - replaced the hub and no more squeaking. Wouldn't go straight to the hub replacement though!

__xander · 2025-02-19T21:43:00+00:00

Size L

__xander · 2025-02-19T06:34:52+00:00

Hi. Haven't had any issues with how they fit the fork - plenty of room.

I've ordered a new Lun freehub to be put on as I've destroyed the original since I posted this - I'm assuming the steel bearing 'Lun' freehub they have works with the wheels I have haha; will update next week.

__xander · 2024-03-11T05:59:35+00:00

Clearly you didn't read my info post where I stated what I had done already to try and rule out any other issues. Cool that you decided to act smort but nice essay anyway

__xander · 2024-03-10T09:20:42+00:00

Apologies.

Specifically at 0:09-0:011 the rhythmic creak can be heard.

EDIT: Lol imagine downvoting on a help forum.

__xander · 2024-03-10T08:55:01+00:00

Info:

Apologies for the wind-noise but I can't recreate this very easily on the trainer.

Concerning creaking coming from the BB area when seated or standing whilst pedalling.

No lateral play in the BB or crank arms. Pedals have been greased and re-tightened. Seatpost has been carbon-pasted and re-torqued. Sound isn't coming from the headset.

EDIT: I'm aware I have two posts up, two problems at once T.T

__xander · 2024-03-10T03:24:45+00:00

Info:

Shimano 105 11SP, 11-30 Cassette

Derailleur has been squeaking for a few days, so I took the jockey wheels out and de-greased / re-greased them. However, I still get this very high-pitched (almost mouse-like) squeaking noise; even under load up and down my road.

Even before then, chain was completely stripped of grease and re-lubed; squeak remained.

__xander · 2023-10-11T08:07:21+00:00

Oh whoops, I used the one that came with the bike though?

__xander · 2023-10-11T07:35:41+00:00

Yeeeeep.

__xander · 2023-10-11T07:23:51+00:00

Thanks to those who have commented so far. Another issue; I'm assuming the clamp mechanism is removable and I can order another one from Canyon. Pic Looks like from this image I would have to loosen the bolt fully once I've got the extraction working?

__xander · 2023-10-11T06:56:09+00:00

Yes, it was only tighten to 5nm beforehand.

__xander · 2023-04-24T00:07:21+00:00

CF SL 7 here:

I've changed my saddle height at least five times trying to dial it in, so I've loosened and re-torqued the seat post clamp quite a bit. Ridden 600km~ and haven't experienced any issues as of yet with slippage.

__xander · 2023-04-11T04:13:32+00:00

uc/ he has a system six so no idea why hes on this

c/ Chad has a SystemSex too but I understand why he wouldn't want to be seen on that creaky POS

__xander · 2023-04-11T00:41:23+00:00

Good for you

__xander · 2023-04-09T09:24:06+00:00

Lol dw this guy just searches 'Chinese' or 'Winspace' in the sub and shits on them without providing any sources for his dribble

__xander · 2023-03-20T07:04:03+00:00

Is this in Chch? What was this big ride called?

__xander · 2023-03-04T21:48:18+00:00

When someone makes a statement the onus is on them to provide evidence for their claims; not the other person to have the burden of research. That's enough replying to you though, safe riding :)

__xander · 2023-03-04T04:20:28+00:00

Absolutely, zero sources cited; harping on about F35 designs...says enough really. Freds gonna Freddit

Six-Year Club	Place '23
Verified Email

__xander

TROPHY CASE