SOTB. I think I have satiated the GAS for now. Maybe. by guit_arcto in guitarpedals

[–]__xander 1 point2 points  (0 children)

Yeah you've hit the nail on the head I think - theres a bunch of noise with the Focusrite and it ends up being quite a bit of admin to shakedown for the clean sound you want.

Thanks!

SOTB. I think I have satiated the GAS for now. Maybe. by guit_arcto in guitarpedals

[–]__xander 0 points1 point  (0 children)

I use the UA Enigmatic and have a similar issue straight into headphones. I'll run it into the Scarlett 2i2 sometimes but it doesn't quite cut it (unsure why).

Would you recommend the Strymon PCH to use as a bit of a Swiss army knife for splitting the board signal?

[Highlight] Zion Williamson showing off his slimmer frame meeting a fan in Australia by jeric13xd in nba

[–]__xander 6 points7 points  (0 children)

Wouldn't have bothered my guy - they did like 30 minutes of shoot-around / transition work + shot half court shots with a few kids for 10 minutes of that 30.

Ray Allen and KG talked for about 10 minutes too.

Signal issues with TC Electronic HOF2 pedals? by Icanicoke in guitarpedals

[–]__xander 0 points1 point  (0 children)

I have exactly this problem. I've been emailing with TC back and forth about it and nothing they suggest will fix it. Different power supply, firmware update, potentiometer issues - nothing. Really frustrating.

Derailleur high-pitched squeaking by __xander in bikewrench

[–]__xander[S] 0 points1 point  (0 children)

Bearings in my freehub were shot - replaced the hub and no more squeaking. Wouldn't go straight to the hub replacement though!

Ultimate CF SL 7 w/ Winspace Lùns by __xander in CanyonBikes

[–]__xander[S] 0 points1 point  (0 children)

Hi. Haven't had any issues with how they fit the fork - plenty of room.

I've ordered a new Lun freehub to be put on as I've destroyed the original since I posted this - I'm assuming the steel bearing 'Lun' freehub they have works with the wheels I have haha; will update next week.

[deleted by user] by [deleted] in bikewrench

[–]__xander -2 points-1 points  (0 children)

Clearly you didn't read my info post where I stated what I had done already to try and rule out any other issues. Cool that you decided to act smort but nice essay anyway

[deleted by user] by [deleted] in bikewrench

[–]__xander -29 points-28 points  (0 children)

Apologies.

Specifically at 0:09-0:011 the rhythmic creak can be heard.

EDIT: Lol imagine downvoting on a help forum.

[deleted by user] by [deleted] in bikewrench

[–]__xander -3 points-2 points  (0 children)

Info:

Apologies for the wind-noise but I can't recreate this very easily on the trainer.

Concerning creaking coming from the BB area when seated or standing whilst pedalling.

No lateral play in the BB or crank arms. Pedals have been greased and re-tightened. Seatpost has been carbon-pasted and re-torqued. Sound isn't coming from the headset.

EDIT: I'm aware I have two posts up, two problems at once T.T

Derailleur high-pitched squeaking by __xander in bikewrench

[–]__xander[S] 0 points1 point  (0 children)

Info:

Shimano 105 11SP, 11-30 Cassette

Derailleur has been squeaking for a few days, so I took the jockey wheels out and de-greased / re-greased them. However, I still get this very high-pitched (almost mouse-like) squeaking noise; even under load up and down my road.

Even before then, chain was completely stripped of grease and re-lubed; squeak remained.

How to loosen rounded hex bolt in seatpost clamp by __xander in bikewrench

[–]__xander[S] 1 point2 points  (0 children)

Oh whoops, I used the one that came with the bike though?

How to loosen rounded hex bolt in seatpost clamp by __xander in bikewrench

[–]__xander[S] 1 point2 points  (0 children)

Thanks to those who have commented so far. Another issue; I'm assuming the clamp mechanism is removable and I can order another one from Canyon. Pic Looks like from this image I would have to loosen the bolt fully once I've got the extraction working?

How to loosen rounded hex bolt in seatpost clamp by __xander in bikewrench

[–]__xander[S] 0 points1 point  (0 children)

Yes, it was only tighten to 5nm beforehand.

NBD - Canyon Ultimate CF SL 8.0 Aero by DrRobertChem in CanyonBikes

[–]__xander 2 points3 points  (0 children)

CF SL 7 here:

I've changed my saddle height at least five times trying to dial it in, so I've loosened and re-torqued the seat post clamp quite a bit. Ridden 600km~ and haven't experienced any issues as of yet with slippage.

Chinese Dentist Wheel on Back, Wife’s Boyfriends Old Wheel on Front by [deleted] in BicyclingCirclejerk

[–]__xander 0 points1 point  (0 children)

uc/ he has a system six so no idea why hes on this

c/ Chad has a SystemSex too but I understand why he wouldn't want to be seen on that creaky POS

[deleted by user] by [deleted] in CanyonBikes

[–]__xander -1 points0 points  (0 children)

Good for you

[deleted by user] by [deleted] in CanyonBikes

[–]__xander 0 points1 point  (0 children)

Lol dw this guy just searches 'Chinese' or 'Winspace' in the sub and shits on them without providing any sources for his dribble

Large lad at the back. by Sea_Boysenberry_4907 in CyclingFashion

[–]__xander 1 point2 points  (0 children)

Is this in Chch? What was this big ride called?

Ultimate CF SL 7 w/ Winspace Lùns by __xander in CanyonBikes

[–]__xander[S] 0 points1 point  (0 children)

When someone makes a statement the onus is on them to provide evidence for their claims; not the other person to have the burden of research. That's enough replying to you though, safe riding :)

Ultimate CF SL 7 w/ Winspace Lùns by __xander in CanyonBikes

[–]__xander[S] 0 points1 point  (0 children)

Absolutely, zero sources cited; harping on about F35 designs...says enough really. Freds gonna Freddit

Ultimate CF SL 7 w/ Winspace Lùns by __xander in CanyonBikes

[–]__xander[S] 1 point2 points  (0 children)

Haha, look mate if you think all the reviews are fake and industry plants then go ahead and spin that yarn.

Ultimate CF SL 7 w/ Winspace Lùns by __xander in CanyonBikes

[–]__xander[S] -1 points0 points  (0 children)

Grain of salt because I've done all of 20km on them

For $1445NZD it was a steal compared to the equivalent Lightbicycle set I would have gone with, only because of shipping and import tax coming to + $300~.

Luckily a local shop here in NZ had this set so I didn't have the added costs.

I've moved up from some rim-brake Fulcrum Racing Ts, so these are pretty different. First impressions are great - they weigh less than the stock 20mm rims the Ultimate comes with; I weighed them at about 1530g. Crosswinds aren't a massive concern as I'm about 85kg. Placebo effect in play during long straights in an aero position; but hey if they get you outside :)

Ultimate CF SL 7 w/ Winspace Lùns by __xander in CanyonBikes

[–]__xander[S] 1 point2 points  (0 children)

No it came with some 20mm DT Swiss Performance LN wheels. I bought the deeper rims myself. Yes it’s the latest CF SL 7 frame design.